Open DuckersMcQuack opened 2 years ago
OctoKlipper
Printer Profile
Klipper state: Shutdown
Macros
State
State: Connecting
File:
Uploaded:
Timelapse: -
Approx. Total Print Time: -
Print Time: -
Print Time Left: -
Printed: -
Files
Zelda Sword full size
Size: 20.5MB
30 mm cube_6m_0.20mm_205C_PLA_ENDER3PRO.gcode
Uploaded: a minute ago
Size: 37.8KB
ironhead2.gcode Uploaded: 2 hours ago Size: 3.8MB
ironhead.gcode Uploaded: 2 hours ago Size: 4.2MB
Top_Joy_Fidget_Low_Tolerance_21m_0.20mm_205C_PLA_ENDER3PRO.gcode Uploaded: 3 hours ago Size: 643.1KB
Calibration Cube_43m_0.20mm_205C_PLA_ENDER3PRO.gcode Uploaded: 4 hours ago Size: 684.6KB
Free: 9.5GB / Total: 29.0GB Create folder... Upload Upload to SD Hint: You can also drag and drop files on this page to upload them. Printer Notifications There are currently no notifications from your printer.
[Klipper](javascript:;)
[Temperature](http://192.168.0.112/#temp)
[Control](http://192.168.0.112/#control)
[GCode Viewer](http://192.168.0.112/#gcode)
[Terminal](http://192.168.0.112/#term)
[Timelapse](http://192.168.0.112/#timelapse)
Messages 01:18:56 Klipper: Standby 01:53:30 Too many consecutive timeouts, printer still connected and alive? 01:53:30 Klipper: Disconnected from host 01:54:01 Klipper: Standby 02:05:36 Restarting Klipper. 02:05:44 Klipper: Connecting ...
Restart Tools Macros
OctoPrint 1.8.2 Python 3.7.3 OctoPi 0.18.0
Web Forum Discord FAQ Docs About System
Communication error There was a communication error while talking to your printer. Please consult the terminal output and octoprint.log for details. Error: Too many consecutive timeouts, printer still connected and alive?
This error is what i get now.
I think I have the same problem? Every time I start the printer, OctoKlipper tries to connect but I can see somethings wrong because I get reported 0degrees celsius for the hotend and bed. After restarting the firmware using the button in OctoKlipper, it starts working. I have to do this every time I turn the printer off/on. I don't have these issues on moon raker.
Before submitting your issue please make sure to provide the following information
About your environment:
Thanks octoprint.log plugin_klipper_debug.log
Continuous issues whenever long print is done, same when attemting to connect to the printer and i ALWAYS have to reboot the printer and restart octoprint, then firmware_restart command.