Open spstrademark opened 1 week ago
@spstrademark wrong image, you are using the cinnado firmware for the t23 soc, check the file name.
you need the T31 image.
Hello,
sorry i edited my post, was the wrong name of the used bin. I am using the thingino-cinnado_d1_t31l.bin where i get the mentioned issue. How can this issue be resolved ?
Thank you for your time ! Stanko
How did you set up the wireless access? From shell over uart or from camera access point and the portal?
Hello,
both ways do not work. The portal doesn't show up. Through the shell, settings can be made, but the camera does not connect to router. Thank you for your time.
Hello,
both ways do not work. The portal doesn't show up. Through the shell, settings can be made, but the camera does not connect to router. Thank you for your time.
Can you provide more information
Hello,
i am using the T31L processor with 8 MB flash and cinnado d1. Got the precompiled bin _thingino-cinnado_d1t31l.bin from here :
After flashing the bin i get a message " Starting wireless " and the device stops working there. I have attached a screenshot with the recieved message. Thank you for your response!
Best regards, Stanko