search

things4u / ESP-1ch-Gateway-v5.0--OLD

Version 5 of Single Channel LoRa Gateway
MIT License
311 stars 162 forks source link

downlink how you send to nodes from mqtt or ttn? #2

Open halukmy opened 6 years ago

halukmy commented 6 years ago

hello all, i just collect data when node send to gateway(esp12e) via mqtt parsing so its great i also send downlink via mqtt over ttn network and i can follow traffic on application data

but when i send data on mqtt network via mqtt i see on application traffic area but coulndt see on traffic on gateway layout also no seen on arduino debug console

any tip?

thanks

zenghi commented 6 years ago

HI halukmy I successfully use the downlink ，you can view PULL REQUESTS.

halukmy commented 6 years ago

@zenghi thanks so much I been waiting long so you have any demo?

Now mqtt works our nodemcu gateway? That's brilliant! Thanks much

zenghi commented 6 years ago

image image image image

Use ESP8266 to do single-channel receive and transmit,terminal part can see ACK,Platform-side can see the datat storage.

halukmy commented 6 years ago

Like a dream! Thanks much!

What's your lmic source and version?

zenghi commented 6 years ago

SX1278 and esp8266，SX1276 I think the same applies The terminal uses STM32L151 and SX1278 Maybe I did not understand you very well,hope this helps.

halukmy commented 6 years ago

Pardon me @zenghi

i mean, what you use for nodes? for example

https://github.com/lyusupov/SoftRF/tree/master/software/firmware/source/libraries/arduino-lmic this lib you advices?

and second question,

is it possible message without gateway with secure? did you work any on it?

zenghi commented 6 years ago

I'm sorry, I see your message now。 I use the following lib https://github.com/Lora-net/LoRaMac-node

The second question, No corresponding work

halukmy commented 6 years ago

im using www.dorji.com/docs/data/DRF1278F.pdf with lmic 1.5 , is my dorji work with LoraMac-node? i cant see any examples ino in semtech repo:(

zenghi commented 6 years ago

If possible, I can give you a set of hardware. But the logistics cycle will be longer.

halukmy commented 6 years ago

@zenghi you serious? that would be awesome!

zenghi commented 6 years ago

Yes, at present, the complete circuit is being debugged, and once the success will be sent to a device to you, please send your address to my private mailbox.

halukmy commented 6 years ago

Thanks @zenghi , i just send mail to 309966755@qq.com from haluky@live.com

halukmy commented 6 years ago

@zenghi hi Zenghi,

do you have Class-C support for this channel for limic ?

schwiderke92 commented 5 years ago

downlink is work?

richard-ubi commented 5 years ago

I have encountered such a problem, I sent the data to LoRaServer only uplink, downlink error 8 4I2GXL1JH%YL@2O @KUWG