Open skyden-ua opened 4 years ago
Thanks! As you do not have all the knowledge, do you know how to make a sensor? I have ordered a board and will have a look to see if the code would change a lot.
M.
Oh and btw i will work on version 6, the ESP 1 channel gateway version (without version 5)
Благодарность! Поскольку у вас нет всех знаний, вы знаете, как сделать датчик? Я заказал плату и посмотрю, сильно ли изменится код.
М.
There are several ideas on how to do this. But the modules are still on the way and I'm not sure if this will work))
Да, и между прочим, я буду работать над версией 6, 1-канальной шлюзовой версией ESP (без версии 5).
Hello. There are some successes with the boards E22-900M30S, Semtech SX1262
Hello. Your project helped me a lot, I continue to experiment with it, and these are the only nodes for hundreds of kilometers. I want to try the Semtech SX1262 and the E22-900M30S seems to be a good option for this. http://www.ebyte.com/en/product-view-news.aspx?id=453
Could you add support for the Semtech SX1262? Unfortunately, I do not have enough knowledge to do this. Thank you very much for your work.