openCL FPGA SDK 17.1 De1SoC

[Shahnewaz-rvis]

Hi, I am trying to use OpenCL SDK 17.1 (Quartus Standard ) with De1SoC I am having a couple of problems OS Ubuntu Intel SDK installation Quartus Prime Lite 17.1
Intel FPGA SDK for OpenCL 17.1
SoC Embedded Design Suite (EDS)

1. Compiling host Application I have installed all the necessary cross compiler using the command provided by your documents sudo apt update sudo apt install u-boot-tools gcc-arm-linux-gnueabihf g++-arm-linux-gnueabihf libncurses5-dev make lsb uml-utilities git

after issuing make host

make host arm-linux-gnueabihf-g++ host/src/color.o host/src/video.o host/src/AOCL_Utils.o host/src/screen.o host/src/opt.o host/src/main.o -o bin/camera_sobel.run -L/intelFPGA/17.1/hld/board/terasic/de1soc/arm32/lib -L/intelFPGA/17.1/hld/host/arm32/lib -L/intelFPGA/17.1/hld/host/arm32/lib -Wl,--no-as-needed -lalteracl -lalterahalmmd -lalterammdpcie -lelf -lstdc++ -lSDL2 /usr/lib/gcc-cross/arm-linux-gnueabihf/5/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lSDL2 collect2: error: ld returned 1 exit status Makefile:115: recipe for target 'camera_sobel.run' failed make: *** [camera_sobel.run] Error 1

I already have installed sudo apt-get install libglib2 the problem remains same

2. Running c5soc_opencl_lxde_all_in_one_180317.img on De1Soc. After boot with de1soc (opecl rbf and dtd ) I executed sobel filter using RTE 17 Windows shows the picture pressing + / - / = does not have any effect.

3. if I run my opencl application .aocx it says libalterammd library missing

Could please help me to sort out these problems, specially I am interested to run sobel using UVC camera using intel fpga sdk 17.1 on DE1SoC

Thanks a lot

[thinkoco]

@Shahnewaz-rvis Hi, late reply

1. there is no sdl2, you can buid the opencl host on sdcard directly after boot the de1-soc. source the 17.1 runtime on terminal, install the libsdl2-dev libsdl2-2.0-0 and make host.
2. it's "=" and "+" (shift =) nearby the backspace , not the numeric keypad
3. have more detail logs? have you source the run-time script firstly?

[Shahnewaz-rvis]

Hi, Thanks I rebuild the Gray color application but has some problems.

1. UVC camera does not show the full image (camera provides 384x384 res.)

However, I solved the cross compiler using the following steps might be helpful for others,

Solution regarding the compilation of HOST application for the board DE1SoC 1. install Cross Compilation as follows sudo apt install u-boot-tools gcc-arm-linux-gnueabihf g++-arm-linux-gnueabihf libncurses5-dev make lsb uml-utilities git

2. Install SDL2 library on the cross compiler

hg clone https://hg.libsdl.org/SDL SDL cd SDL mkdir build cd build ./configure --prefix=/home/ajay/intelFPGA/17.1/hld/host/arm32/ --disable-video-dummy --disable-video-qtopia --disable-cdrom --disable-nasm --disable-alsa --disable-esd --disable-arts --disable-video-dga --disable-pulseaudio --disable-esd --disable-video-wayland --target=arm-linux --host=arm-linux make sudo make install sudo ldconfig

3. Then compile the host application go to the dir. cd /path/to/application/dir make host

[thinkoco]

@Shahnewaz-rvis Hi, yes, cross compiling is a way to solve the issue. Sometimes, the version and the configuration of library that you build may not be equal to those in the sd card. So, you can just build the host on de1soc. copy the source code to sd card, run de1soc, source the OpenCL runtime, cd to host dir and make host.(also, you can install some libs by apt-get install on de1soc ); About the resolution, you can test the camera on PC firstly by guvcview ,then you can get the supported resolution and format with you camera. In OpenCL host , the camera initialize by these code:

    video.format.type = stream_flag;
    video.format.fmt.pix.width = opt.width;
    video.format.fmt.pix.height = opt.height;
    video.format.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;

So, you can check the YUV 422 format with your camera.(V4L2_PIX_FMT_YUYV — Packed format with ½ horizontal chroma resolution, also known as YUV 4:2:2)

[Shahnewaz-rvis]

HI, Thanks a lot.
I will have a look . Mean while I will be happy to get some example or directions regarding

1. How can I use De1SoC GPIO (head 0) from kernel code
2. how I can use OpenCV acceleration mechanism in kernel code

Thanks a lot

[thinkoco]

Hi, @Shahnewaz-rvis

1. here is a way to add the PIO to the opencl BSP, and you can control it in opencl host.
2. you can install the opencv on sd card by apt-get ,but there is no mali gpu acceleration. Also, you may build the opencv with neno acceleration

[Shahnewaz-rvis]

Hi, Thanks a lot. My intention is to run some specific algorithms of openCV on Cyclone V. Is there any resource exist regarding this?

[thinkoco]

@Shahnewaz-rvis sorry, I don't know the resources.