search

thirdreality / homeassistant

1 stars 3 forks source link

No Configurable ThirdRealityMotionCluster Available in ZHA on latest firmware. (0x0000003a) #7

Open aredon opened 1 month ago

aredon commented 1 month ago

From the readme: image

My ZHA: image

I noticed that the behavior/length of the motion detection delay has changed over the last couple firmware updates so I had wanted to configure this so that it can be reliable over the long term. However, I am unable to find the required cluster. Any guidance would be appreciated.

aredon commented 1 month ago

I see some changes were made to the motion readme but these features are still not available to me.

rich33584 commented 1 month ago

I would also like to adjust these parameters. The newest update added an almost 1 second delay between motion detected and it reporting the motion.

epweston commented 1 month ago

I too am have 2 second delays with the last 2 firmware updates and I'm loosing wife approval.

aredon commented 1 month ago

I too am have 2 second delays with the last 2 firmware updates and I'm loosing wife approval.

In the short term you can just add delays to the motion triggers in home assistant.

rich33584 commented 1 month ago

Delays dont fix the lag in reprting to home assistant there has been motion. thats the bigger issue.

rich33584 commented 1 month ago

I have noticed that you have to remove the device from ZHA and then add it back in to see the new clusters.