englianhu
commented
3 years ago https://github.com/thispc/psiphon/issues/36#issuecomment-846553232 & https://github.com/thispc/psiphon/issues/22#issuecomment-846551757
+:~/psiphon$ python3 psi_client.py -u
Traceback (most recent call last):
File "psi_client.py", line 20, in <module>
from sets import Set
-ImportError: cannot import name 'Set' from 'sets' (/home/englianhu/.local/lib/python3.8/site-packages/sets/__init__.py)replace the :~$ sudo micro ~/psi_api.py with content from https://github.com/thispc/psiphon/blob/master/psi_api.py when faced above error.
Since psiphon~:$ python3 psi_client.py -s faced error on python2 & python3, then I refer to How to use/install python 2to3? and install 2to3.
:~$ sudo apt install 2to3
:~$ sudo apt install python3-lib2to3
:~$ sudo apt install python3-toolzand change all *.py files to python3
:~$ 2to3 -w /home/englianhu/psiphon/psi_client.py
:~$ 2to3 -w /home/englianhu/psiphon/psi_api.py
:~$ 2to3 -w /home/englianhu/psiphon/psi_ssh_connection.py
:~$ 2to3 -w /home/englianhu/psiphon/SocksiPy/socks.pyHere I show the log
:~/psiphon$ python3 psi_client.py -u
File "psi_client.py", line 281
except urllib2.URLError, e:
^
SyntaxError: invalid syntax
:~/psiphon$ python psi_client.py -u
:~/psiphon$ psiphon$ python psi_client.py -s -a
psiphon$: command not found
:~/psiphon$ python psi_client.py -s -a
:~/psiphon$ python psi_client.py
:~/psiphon$ pip3 install pexpect
Defaulting to user installation because normal site-packages is not writeable
:~/psiphon$ python3 psi_client.py -h
:~/psiphon$ psiphon$ python psi_client.py -r JP psiphon$: command not found
:~/psiphon$ python psi_client.py -r JP
Traceback (most recent call last):
File "psi_client.py", line 23, in <module>
import http.client
ImportError: No module named http.client
:~/psiphon$ python3 psi_client.py -u
:~/psiphon$ sudo pip3 install wget
[sudo] password for englianhu:
Requirement already satisfied: wget in /usr/local/lib/python3.8/dist-packages (3.2)
:~/psiphon$ python3 psi_client.py -s -a
:~/psiphon$ python3 psi_client.py
:~/psiphon$ python3 psi_client.py -r JP
:~/psiphon$ ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp5s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 00:25:ab:74:2f:08 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.13/24 brd 192.168.1.255 scope global dynamic noprefixroute enp5s0
valid_lft 12120sec preferred_lft 12120sec
inet6 2001:e68:542d:9675:6965:a13:8f8b:9b37/64 scope global temporary dynamic
valid_lft 258885sec preferred_lft 61948sec
inet6 2001:e68:542d:9675:5108:4ad1:e67f:df98/64 scope global dynamic mngtmpaddr noprefixroute
valid_lft 258885sec preferred_lft 172485sec
inet6 fc01::74c6:c559:2233:deae/64 scope global temporary dynamic
valid_lft 580920sec preferred_lft 61948sec
inet6 fc01::1834:f957:f6a5:bc67/64 scope global dynamic mngtmpaddr noprefixroute
valid_lft 2591685sec preferred_lft 604485sec
inet6 fe80::12f5:5494:cb5d:94eb/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 02:42:9f:b7:09:65 brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever
Here I tried another tool K-Phon https://github.com/thispc/psiphon/issues/26#issuecomment-846591940
Step 1
Source : How do I install Psiphon on Ubuntu 14.04 LTS (Step by Step) and open
README.mdfor instructions.Step 2
Source:
./configurefails when using libssl-dev 1.1.0g #22Step 3
Originally posted by @englianhu in https://github.com/thispc/psiphon/issues/36#issuecomment-846553232