Open CamZie opened 1 year ago
Can you post the verbose output from the plugin with "-vvv"?
Can you post the verbose output from the plugin with "-vvv"?
Use of uninitialized value $lineVals[1] in substitution (s///) at ./check_adaptec_raid line 422.
Use of uninitialized value $controllerToCheck{"Boot Flash"} in concatenation (.) or string at ./check_adaptec_raid line 796.
Use of uninitialized value $controllerToCheck{"BIOS"} in concatenation (.) or string at ./check_adaptec_raid line 797.
Use of uninitialized value in concatenation (.) or string at ./check_adaptec_raid line 813.
OK (CTR, LD, PD, ZMM)|CTR_Temperature=45;80;90
Used arcconf commands:
- /usr/bin/sudo /usr/local/bin/arcconf GETCONFIG 1 AD
- /usr/bin/sudo /usr/local/bin/arcconf GETCONFIG 1 AD
- /usr/bin/sudo /usr/local/bin/arcconf GETCONFIG 1 LD
- /usr/bin/sudo /usr/local/bin/arcconf GETCONFIG 1 PD
CTR information:
- 9350-8i 2GB Flash:
- Serial No=***REMOVED***
- Driver=Linux 2.1.12-055
- Boot Flash=
- BIOS Version=
- FW Version=5.33
- Temperature=45 C/ 113 F (Normal)
- Defunct drives=0
- LD devices/Failed/Degraded=1/0/0
LD information:
PD information:
- pd0:
- 56 Day Warning Present=False
- Aborted Commands=0
- Array=0
- Bad Target Errors=0
- Block Size=512 Bytes
- Boot Type=None
- Current Temperature=26 deg C
- Drive Configuration Type=Data
- Drive Exposed to OS=False
- Drive Part Number=SSS7A43197
- Drive SKU Number=02JG532
- Drive Unique ID=***REMOVED***
- Drive has stale RIS data=False
- Ecc Recovered Read Errors=0
- Estimated Life Remaining=Not Applicable
- Failed Read Recovers=0
- Failed Write Recovers=0
- Firmware=MP33
- Format Errors=0
- Hard Read Errors=0
- Hard Write Errors=0
- Hardware Errors=0
- Hot Plug Count=0
- Last Failure Reason=No Failure
- Maximum Link Rate=6 Gbps
- Maximum Temperature=33 deg C
- Media Failures=0
- Model=MTFDDAK480TDS-1AW1ZA
- NCQ status=Enabled
- NCQ supported=Supported
- Negotiated Logical Link Rate=6 Gbps
- Negotiated Physical Link Rate=6 Gbps
- Not Ready Errors=0
- Other Time Out Errors=0
- PHY Count=1
- Physical Block Size=4K Bytes
- Predictive Failures=0
- Reported Channel,Device(T:L)=0,0(0:0)
- Reported Location=Direct Attached, Slot 0(Connector 0:CN0)
- Reserved Size=32768 KB
- Retry Recovered Read Errors=0
- Retry Recovered Write Errors=0
- S.M.A.R.T.=No
- S.M.A.R.T. warnings=0
- SSD=Yes
- SSD Smart Trip Wearout=False
- Sanitize Erase Support=True
- Sanitize Lock Anti-Freeze Support=True
- Sanitize Lock Freeze Support=True
- Sanitize Lock Setting=None
- Scsi Bus Faults=0
- Sectors Reads=2149275
- Sectors Written=14642436
- Serial number=***REMOVED***
- Service Hours=31
- State=Online
- Threshold Temperature=70 deg C
- Total Size=457862 MB
- Transfer Speed=SATA 6.0 Gb/s
- Unused Size=0 MB
- Usage Remaining=100 percent
- Used Size=457830 MB
- Vendor=ATA
- World-wide name=***REMOVED***
- Write Cache=Disabled (write-through)
- pd=pd0
- pd1:
- 56 Day Warning Present=False
- Aborted Commands=0
- Array=0
- Bad Target Errors=0
- Block Size=512 Bytes
- Boot Type=None
- Channel #2=
- Current Temperature=27 deg C
- Drive Configuration Type=Data
- Drive Exposed to OS=False
- Drive Part Number=SSS7A43197
- Drive SKU Number=02JG532
- Drive Unique ID=***REMOVED***
- Drive has stale RIS data=False
- Ecc Recovered Read Errors=0
- Estimated Life Remaining=Not Applicable
- Failed Read Recovers=0
- Failed Write Recovers=0
- Firmware=MP33
- Format Errors=0
- Hard Read Errors=0
- Hard Write Errors=0
- Hardware Errors=0
- Hot Plug Count=0
- Last Failure Reason=No Failure
- Maximum Link Rate=6 Gbps
- Maximum Temperature=30 deg C
- Media Failures=0
- Model=MTFDDAK480TDS-1AW1ZA
- NCQ status=Enabled
- NCQ supported=Supported
- Negotiated Logical Link Rate=6 Gbps
- Negotiated Physical Link Rate=6 Gbps
- Not Ready Errors=0
- Other Time Out Errors=0
- PHY Count=1
- Physical Block Size=4K Bytes
- Predictive Failures=0
- Reported Channel,Device(T:L)=0,1(1:0)
- Reported Location=Direct Attached, Slot 1(Connector 0:CN0)
- Reserved Size=32768 KB
- Retry Recovered Read Errors=0
- Retry Recovered Write Errors=0
- S.M.A.R.T.=No
- S.M.A.R.T. warnings=0
- SSD=Yes
- SSD Smart Trip Wearout=False
- Sanitize Erase Support=True
- Sanitize Lock Anti-Freeze Support=True
- Sanitize Lock Freeze Support=True
- Sanitize Lock Setting=None
- Scsi Bus Faults=0
- Sectors Reads=2146849
- Sectors Written=14642820
- Serial number=***REMOVED***
- Service Hours=31
- State=Online
- Threshold Temperature=70 deg C
- Total Size=457862 MB
- Transfer Speed=SATA 6.0 Gb/s
- Unused Size=0 MB
- Usage Remaining=100 percent
- Used Size=457830 MB
- Vendor=ATA
- World-wide name=***REMOVED***
- Write Cache=Disabled (write-through)
- pd=pd1
ZMM information:
- ZMM_Status=OK
Hello,
Thank you very much for creating this check.
Upon installing and configuring it as described in the documentation, we are receiving the following error on line
422
:Does anyone know a way to fix it? Thanks in advance.