search

thorrak / tiltbridge

Tilt Hydrometer to WiFi Bridge
http://www.tiltbridge.com/
Other
61 stars 27 forks source link

WLAN not connecting #196

Closed scriper88 closed 2 years ago

scriper88 commented 3 years ago

Hi!

I installed an ESP32 and Tiltbrige with BrewFlasher.

Unfortunately, he cannot connect to the WiFi.

I have even installed an extra access point to have my own SSID (otherwise I have the same for 2.4 and 5 GHz).

I noticed the following: After the WLAN configuration, the ESP does >not< restart. Even restarting by hand does not help, he always opens his own TiltBridgeAP access point. If I then connect to it, I can see that the WiFi configuration has been saved!

I have already reinstalled several times including "erase, wipes all data", baud rate is 115200. I have also tried other power supplies / cables. Do you have any ideas?

I find this under Info:

Not Connected to TP-Link_A11C esp32

Uptime 4 Mins 51 Secs Chip ID 5cc40a24 Chip Rev 1 Flash Size 8388608 bytes PSRAM Size 0 bytes SDK Version v3.3.4-404-g7e63061fa CPU Frequency 240MHz Memory - Free Heap 158772 bytes available Memory - Sketch Size Used / Total bytes 1447808 / 4593536 Not Connected to TP-Link_A11C esp32

Uptime 4 Mins 51 Secs Chip ID 5cc40a24 Chip Rev 1 Flash Size 8388608 bytes PSRAM Size 0 bytes SDK Version v3.3.4-404-g7e63061fa CPU Frequency 240MHz Memory - Free Heap 158772 bytes available Memory - Sketch Size Used / Total bytes 1447808 / 4593536

thorrak commented 2 years ago

Apologies for the delays in addressing this issue. I've changed out the WiFi manager libraries in v1.0.3, which hopefully solves this issue. If you are still having this issue and want to test it out, v1.0.3 should be available (as beta) in BrewFlasher. If you test it, and the issue reoccurs, feel free to come back and post in this issue.