PCBs ready - let me know if you want some

kuek commented 8 years ago

Hi guys, i created a PCB which takes an Arduino Pro Mini, DWM1000 chip and an ESP8266.

It can be connected to 5V Micro USB, all 3V3 is handled by a voltage controller. The ESP is connected to the Arduino UART to send all ranging messages over Wifi to a server. This way, the anchors can easily be connected to a server and all ranging is done by the DWM1000. There is some additional resistors, capacitors, leds, connectors to flash the ESP etc.

they can be used either as anchor or as tag (depending on the ino you flash). let me know if you want some, you will get them at cost price.

arduino_anchor

az-z commented 8 years ago

This is great work. What if I do not need WiFi to send messages?

On Nov 4, 2016 5:07 PM, "kuek" notifications@github.com wrote:

Hi guys, i created a PCB which takes an Arduino Pro Mini, DWM1000 chip and an ESP8266. It can be connected to 5V Mini USB, all 3V3 is handled by a voltage controller. The ESP is connected to the Arduino UART to send all ranging messages to Wifi to a server. This way, the anchors can easily be connected to a server and all ranging is done by the DWM1000. There is some additional resistors, capacitors, leds, connectors to flash the ESP etc.

they can be used either as anchor or as tag (depending on the ino you flash). let me know if you want some, you will get them at cost price.

[image: arduino_anchor] https://cloud.githubusercontent.com/assets/4239543/20022446/f0a23e96-a2da-11e6-83fa-dab08645ed00.jpg

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/thotro/arduino-dw1000/issues/129, or mute the thread https://github.com/notifications/unsubscribe-auth/AExz3eQ-IMPkQmLU8XtYsOV5J9f1qKCGks5q656SgaJpZM4Kp_k3 .

kuek commented 8 years ago

Hi az-z, no problem, just don't solder any ESP on the PCB. Its not needed at all... I made an universal PCB, because I needed WiFi for the anchors. But my tags also use the same PCB and don't use WiFi.

az-z commented 8 years ago

Sweet.thank you

On Nov 4, 2016 5:40 PM, "kuek" notifications@github.com wrote:

Hi az-z, no problem, just don't solder any ESP on the PCB. Its not needed at all... I made an universal PCB, because I needed it WiFi for the anchors. But my tags also use the same PCB and don't use WiFi.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/thotro/arduino-dw1000/issues/129#issuecomment-258554500, or mute the thread https://github.com/notifications/unsubscribe-auth/AExz3TN5Ra2v7gb0BZiFbRbgsFsqlBFfks5q66ZBgaJpZM4Kp_k3 .

maxicastle commented 8 years ago

How much? and where can i buy some of your boards.

kuek commented 8 years ago

Hi, how many boards do you need? I did not put them to an online store yet, but you can drop me an email and we handle it. kuek at me dot com

maxicastle commented 8 years ago

What about 10 boards.

kuek commented 8 years ago

yep, no problem. cost price is really low.

curlyz commented 8 years ago

@kuek Is this the board you use in your latest post ?

kuek commented 8 years ago

Hi curlyz, yes, thats the boards I use. I also recoded these videos using 3 anchors and 1 tag of this hardware...

https://www.youtube.com/watch?v=t1kuF8y7Lwg and https://www.youtube.com/watch?v=2MKSFAHrWqY

faceless105 commented 7 years ago

I'd be interested in a few boards, are any still available?

kuek commented 7 years ago

yep, still available.

sahilparekh commented 7 years ago

Hi @kuek , I am also interested in four boards for now then post experimentation will like go go with more. Can you help me with only PCB boards, and all mounted boards?

kuek commented 7 years ago

@sahilparekh yes i still have PCBs incl SMD. can you send me an email? kuek -at- me -dot- com

kuek commented 7 years ago

Hi guys, we have a new version online which is based on an STM32F103 called Localino 2.0. You can still program the Localino 2.0 with Arduino IDE and make use of your own code. But it has much more space (128kB) and is heaps faster!!

vladimir-shmidt commented 6 years ago

Hi @kuek, where can I find store? or maybe you can share your contact? is this board still available?

kuek commented 6 years ago

Hi @vladimir-shmidt, yes we have some of Version 1.0 left, Please send us an email to info@localino.net

There are also newer boards available here www.localino.net/shop

vladimir-shmidt commented 6 years ago

Hi,

Thanks. Version 2.0 board looks cool. There is some limitation on software around v2. Is it anchors count limitation only? Or anything more?

I’m asking so as I’d like to buy couple kits and build playground with 5 people in with 10m2 space. I guess that it wouldn’t be enough to have only 4 anchors. So, will I able to program this shield by my own for example with this Arduino library https://github.com/thotro/arduino-dw1000 to avoid v2 software limitations?

Thanks.

Sent from Mail for Windows 10

From: kuek Sent: 23 февраля 2018 г. 13:09 To: thotro/arduino-dw1000 Cc: Vladimir Shmidt; Mention Subject: Re: [thotro/arduino-dw1000] PCBs ready - let me know if you want some (#129)

Hi @vladimir-shmidt, yes we have some of Version 1.0 left, Please send us an email to info@localino.net There are also newer boards available here www.localino.net/shop — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or mute the thread.

kuek commented 6 years ago

Hi @vladimir-shmidt

our v2.0 demo firmware can handle 4 anchors and 3 tags.

But you can for sure program your own firmware on it. We supply the Arduino IDE which works with this Arduino https://github.com/thotro/arduino-dw1000 library, so you can develop your own code on our reliable hardware. you will have full acccess to the STM32 controller, so you can do whatever you like ;-)

Alternatively you go for v3.0 which is finished and does not need development anymore.

escrowdis commented 5 years ago

Hi Kuek,

This is really a nice work! I'd like to know if this PCB board is still available for academic research use? We bought couples of bb-dw1km and they didn't work fine in range with maximum distance of 30m under MODE_LONGDATA_RANGE_ACCURACY (we assume it could be at least 100m).

Thanks!

Tony Weng

kuek commented 5 years ago

Hi,

Yes we do have some PCBs left over. In which country are you?

-- Heuel & Löher GmbH & Co KG In den Höfen 9 57368 Lennestadt, Germany

website: www.localino.net linkedIn: www.linkedin.com/company/localino-rtls/

Am 12. April 2019 05:02:48 MESZ schrieb Li-Kang Weng notifications@github.com:

Hi Kuek,

This is really a nice work! I'd like to know if this PCB board is still available for academic research use? We bought couples of bb-dw1km and they didn't work fine in range with maximum distance of 30m under MODE_LONGDATA_RANGE_ACCURACY (we assume it could be at least 100m).

Thanks!

Tony Weng

-- You are receiving this because you were mentioned. Reply to this email directly or view it on GitHub: https://github.com/thotro/arduino-dw1000/issues/129#issuecomment-482418845

escrowdis commented 5 years ago

Hi Kirk,

Thank you so much for the prompt reply. I’m in Taiwan. Is it available to deliver? and how much does it cost for each? We may need 5 PCBs.

Thanks!

BRs, Tony Weng

kuek notifications@github.com於 2019年4月13日週六，上午2:04寫道：

Hi,

Yes we do have some PCBs left over. In which country are you?

-- Heuel & Löher GmbH & Co KG In den Höfen 9 https://maps.google.com/?q=In+den+H%C3%B6fen+9+%0D%0D%0A57368+Lennestadt,+Germany&entry=gmail&source=g 57368 Lennestadt, Germany https://maps.google.com/?q=In+den+H%C3%B6fen+9+%0D%0D%0A57368+Lennestadt,+Germany&entry=gmail&source=g

website: www.localino.net linkedIn: www.linkedin.com/company/localino-rtls/

Am 12. April 2019 05:02:48 MESZ schrieb Li-Kang Weng < notifications@github.com>:

Hi Kuek,

This is really a nice work! I'd like to know if this PCB board is still available for academic research use? We bought couples of bb-dw1km and they didn't work fine in range with maximum distance of 30m under MODE_LONGDATA_RANGE_ACCURACY (we assume it could be at least 100m).

Thanks!

Tony Weng

-- You are receiving this because you were mentioned. Reply to this email directly or view it on GitHub:

https://github.com/thotro/arduino-dw1000/issues/129#issuecomment-482418845

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/thotro/arduino-dw1000/issues/129#issuecomment-482668913, or mute the thread https://github.com/notifications/unsubscribe-auth/AGC_0uMTfGbDQc6tzUrN8cxQGG0pv3hbks5vgMqwgaJpZM4Kp_k3 .

-- BRs, Li-Kang (Tony) Weng

vanillabrand commented 5 years ago

I’d love some too if you have :)

On Friday, 12 April 2019, kuek notifications@github.com wrote:

Hi,

Yes we do have some PCBs left over. In which country are you?

-- Heuel & Löher GmbH & Co KG In den Höfen 9 https://maps.google.com/?q=In+den+H%C3%B6fen+9+%0D%0D%0A57368+Lennestadt,+Germany&entry=gmail&source=g 57368 Lennestadt, Germany

website: www.localino.net linkedIn: www.linkedin.com/company/localino-rtls/

Am 12. April 2019 05:02:48 MESZ schrieb Li-Kang Weng < notifications@github.com>:

Hi Kuek,

This is really a nice work! I'd like to know if this PCB board is still available for academic research use? We bought couples of bb-dw1km and they didn't work fine in range with maximum distance of 30m under MODE_LONGDATA_RANGE_ACCURACY (we assume it could be at least 100m).

Thanks!

Tony Weng

-- You are receiving this because you were mentioned. Reply to this email directly or view it on GitHub: https://github.com/thotro/arduino-dw1000/issues/129# issuecomment-482418845

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/thotro/arduino-dw1000/issues/129#issuecomment-482668913, or mute the thread https://github.com/notifications/unsubscribe-auth/AAlifQPGRkX8YuBjvDwZwdMPNp6icRhzks5vgMqsgaJpZM4Kp_k3 .

NomisTuo commented 5 years ago

Hello Kuek,

I am really interested by the work you did. Do you still have some PCB available? I would really like to test the precision of your solution!

Thank you in advance for your reply.

Best regards

kuek commented 5 years ago

Hi,

Yes we have some left over. They are 65 EUR/piece net incl transceiver and all you need.

Regards

Heuel & Löher GmbH & Co KG In den Höfen 9 57368 Lennestadt, Germany

website: www.localino.net linkedIn: www.linkedin.com/company/localino-rtls/

Am 20. April 2019 23:04:02 MESZ schrieb NomisTuo notifications@github.com:

Hello Kuek,

I am really interested by the work you did. Do you still have some PCB available? I would really like to test the precision of your solution!

Thank you in advance for your reply.

Best regards

-- You are receiving this because you were mentioned. Reply to this email directly or view it on GitHub: https://github.com/thotro/arduino-dw1000/issues/129#issuecomment-485171597

NomisTuo commented 5 years ago

Hi Kuek,

If you still have enough PCB, I would be glad to get 6, i.e. 390€. I am living in Belgium (rue Bruyère 4, 1430 Rebecq) would it be possible to send them via post services? May I pay you over a bank transfer?

I am maybe pushing to far (do not hesitate to tell me) but do you also have a schematic of the PCB with the different connexions and devices?

Thank you very much in advance.

Best regards.

Simon

Le 21 avr. 2019 à 08:44, kuek notifications@github.com a écrit :

Hi,

Yes we have some left over. They are 65 EUR/piece net incl transceiver and all you need.

Regards

Heuel & Löher GmbH & Co KG In den Höfen 9 57368 Lennestadt, Germany

website: www.localino.net linkedIn: www.linkedin.com/company/localino-rtls/

Am 20. April 2019 23:04:02 MESZ schrieb NomisTuo notifications@github.com:

Hello Kuek,

I am really interested by the work you did. Do you still have some PCB available? I would really like to test the precision of your solution!

Thank you in advance for your reply.

Best regards

-- You are receiving this because you were mentioned. Reply to this email directly or view it on GitHub: https://github.com/thotro/arduino-dw1000/issues/129#issuecomment-485171597 — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or mute the thread.

kuek commented 5 years ago

Hi Simon,

Please send me your details, address etc per email to info@localino.net

We will proceed then. Schematics are company confidential.

Best

Heuel & Löher GmbH & Co KG In den Höfen 9 57368 Lennestadt, Germany

website: www.localino.net linkedIn: www.linkedin.com/company/localino-rtls/

Am 21. April 2019 11:25:25 MESZ schrieb NomisTuo notifications@github.com:

Hi Kuek,>

If you still have enough PCB, I would be glad to get 6, i.e. 390€. I am living in Belgium (rue Bruyère 4, 1430 Rebecq) would it be possible to send them via post services? May I pay you over a bank transfer? >

I am maybe pushing to far (do not hesitate to tell me) but do you also have a schematic of the PCB with the different connexions and devices?>

Thank you very much in advance.>

Best regards.>

Simon>

Le 21 avr. 2019 à 08:44, kuek notifications@github.com a écrit :>

Hi,>

Yes we have some left over.> They are 65 EUR/piece net incl transceiver and all you need.>

Regards> --> Heuel & Löher GmbH & Co KG> In den Höfen 9> 57368 Lennestadt, Germany>

website: www.localino.net> linkedIn: www.linkedin.com/company/localino-rtls/>

Am 20. April 2019 23:04:02 MESZ schrieb NomisTuo notifications@github.com:> Hello Kuek,>

I am really interested by the work you did. Do you still have some PCB> available? I would really like to test the precision of your solution! >

Thank you in advance for your reply.>

Best regards>

-- > You are receiving this because you were mentioned.> Reply to this email directly or view it on GitHub:>

https://github.com/thotro/arduino-dw1000/issues/129#issuecomment-485171597> —> You are receiving this because you commented.> Reply to this email directly, view it on GitHub, or mute the thread.>

-- > You are receiving this because you were mentioned.> Reply to this email directly or view it on GitHub:> https://github.com/thotro/arduino-dw1000/issues/129#issuecomment-485237733

NomisTuo commented 5 years ago

Hi Kuek,

Thank you for your answer. I confirm my will to buy 6 PCB at 65€ each.

Here are my details: Simon Verdebout Rue Bruyère 4 1430 Rebecq Belgium +32495465083 sim.verdebout@gmail.com

Best regards.

Simon

Le 21 avr. 2019 à 12:09, kuek notifications@github.com a écrit :

Hi Simon,

Please send me your details, address etc per email to info@localino.net

We will proceed then. Schematics are company confidential.

Best

Heuel & Löher GmbH & Co KG In den Höfen 9 57368 Lennestadt, Germany

website: www.localino.net linkedIn: www.linkedin.com/company/localino-rtls/

Am 21. April 2019 11:25:25 MESZ schrieb NomisTuo notifications@github.com:

Hi Kuek,>

If you still have enough PCB, I would be glad to get 6, i.e. 390€. I am living in Belgium (rue Bruyère 4, 1430 Rebecq) would it be possible to send them via post services? May I pay you over a bank transfer? >

I am maybe pushing to far (do not hesitate to tell me) but do you also have a schematic of the PCB with the different connexions and devices?>

Thank you very much in advance.>

Best regards.>

Simon>

Le 21 avr. 2019 à 08:44, kuek notifications@github.com a écrit :>

Hi,>

Yes we have some left over.> They are 65 EUR/piece net incl transceiver and all you need.>

Regards> --> Heuel & Löher GmbH & Co KG> In den Höfen 9> 57368 Lennestadt, Germany>

website: www.localino.net> linkedIn: www.linkedin.com/company/localino-rtls/>

Am 20. April 2019 23:04:02 MESZ schrieb NomisTuo notifications@github.com:> Hello Kuek,>

I am really interested by the work you did. Do you still have some PCB> available? I would really like to test the precision of your solution! >

Thank you in advance for your reply.>

Best regards>

-- > You are receiving this because you were mentioned.> Reply to this email directly or view it on GitHub:>

https://github.com/thotro/arduino-dw1000/issues/129#issuecomment-485171597> —> You are receiving this because you commented.> Reply to this email directly, view it on GitHub, or mute the thread.>

-- > You are receiving this because you were mentioned.> Reply to this email directly or view it on GitHub:> https://github.com/thotro/arduino-dw1000/issues/129#issuecomment-485237733 — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or mute the thread.

Yasirsmb commented 4 years ago

Hi Simon, Please send me your details, address etc per email to info@localino.net We will proceed then. Schematics are company confidential. Best -- Heuel & Löher GmbH & Co KG In den Höfen 9 57368 Lennestadt, Germany website: www.localino.net linkedIn: www.linkedin.com/company/localino-rtls/ Am 21. April 2019 11:25:25 MESZ schrieb NomisTuo notifications@github.com: … Hi Kuek,> > If you still have enough PCB, I would be glad to get 6, i.e. 390€. I am living in Belgium (rue Bruyère 4, 1430 Rebecq) would it be possible to send them via post services? May I pay you over a bank transfer? > > I am maybe pushing to far (do not hesitate to tell me) but do you also have a schematic of the PCB with the different connexions and devices?> > Thank you very much in advance.> > Best regards.> > Simon> > > Le 21 avr. 2019 à 08:44, kuek @.> a écrit :> > > > Hi,> > > > Yes we have some left over.> > They are 65 EUR/piece net incl transceiver and all you need.> > > > Regards> > --> > Heuel & Löher GmbH & Co KG> > In den Höfen 9> > 57368 Lennestadt, Germany> > > > website: www.localino.net> > linkedIn: www.linkedin.com/company/localino-rtls/> > > > Am 20. April 2019 23:04:02 MESZ schrieb NomisTuo @.>:> > >Hello Kuek,> > >> > >I am really interested by the work you did. Do you still have some PCB> > >available? I would really like to test the precision of your solution! > > >> > >Thank you in advance for your reply.> > >> > >Best regards> > >> > >-- > > >You are receiving this because you were mentioned.> > >Reply to this email directly or view it on GitHub:> > >#129 (comment)> > —> > You are receiving this because you commented.> > Reply to this email directly, view it on GitHub, or mute the thread.> > > -- > You are receiving this because you were mentioned.> Reply to this email directly or view it on GitHub:> #129 (comment)

Hello, Can I do it with just using dwm1000 and Arduino mini pro without using PCB?

thotro / arduino-dw1000