search

threefoldtech / zos

Autonomous operating system
https://threefold.io/host/
Apache License 2.0
82 stars 13 forks source link

Nodes have ips they shouldnt #1869

Closed Parkers145 closed 1 year ago

Parkers145 commented 1 year ago

opening at the request of jan he saw my picture and said that ZOS shouldnt have an ipv6 address, on all of my node it has a /128 and a /64 IMG-6749 IMG-6748 IMG-6747 IMG-6746 IMG-6744 IMG-6743

delandtj commented 1 year ago

can you elaborate on that a little? That is ; a little napkin drawing of your physical network layout and eventual switch/router config

Parkers145 commented 1 year ago

image

     IPV4 WAN CONFIG

WAN IPV4 Address: 104.15.48.92 WAN IPV4 Gateway 104.15.48.1 Primary DNS Server 68.94.156.9 Secondary DNS Server 68.94.157.9

      IPV6 WAN CONFIG

Global Unicast IPv6 Address 2001:506:7c1e:11a::1 Link Local Address fe80::de8d:8aff:fec0:b8c1 Default IPv6 Gateway Address fe80::2d0:f6ff:fe17:9388

      DHCP COFIG

Device IPv4 Address 192.168.1.254 DHCPv4 Netmask 255.255.255.0 DHCP Server On DHCPv4 Start Address 192.168.1.64 DHCPv4 End Address 192.168.1.253 DHCP Leases Available 295 DHCP Leases Allocated 20 DHCP Primary Pool Private Secondary Subnet Enabled Public Subnet 162.205.240.128/25 Public Subnet Gateway 162.205.240.254

     IPV6 LAN CONFIG

Global Unicast IPv6 Address 2600:1700:c1e0:1150::1 Link-local IPv6 Address fe80::de8d:8aff:fec0:b8c2 IPv6 Addressing Subnet (including length) 2600:1700:c1e0:1150::/64 IPv6 Delegated Prefix Subnet (including length) 2600:1700:c1e0:115f::/64

     Switch Config

Uplink- Port Type Access, Vlan 1 Nodes- Port Type Access, Vlan 1, Edged Port

Parkers145 commented 1 year ago

I cannot change any configuration on the ISP Gateway, But I am able to use IP passthrough and Cascaded router with it.

Parkers145 commented 1 year ago

I believe I have finally located the issue that I have THOUGHT was incompatibility between my switch and 5gbaset. but, after borrowing a cable tester from a local friend i found that my in wall cat 6a run had a single pair that was not functioning properly.

Heres the behavior i had

intermittent speed degradation, this is what really threw me off because sometimes i got the full speed.

slow dhcp aquisition

slow RA aquisition.

Some equipment would only make 100 mbit links

ultimate purchasing my mikrotik gear is what gave me enough info to finally find the issue as that gear absolutely refused to show more then 100mbit link when everything else was claiming to have full link speed. going to do more test to verify today, but hopefully this resolves the rest of my issues with my pub addresses.

muhamadazmy commented 1 year ago

@Parkers145 any updates on this? can we close it ?

rkhamis commented 1 year ago

@Parkers145 please reopen if you still have an issue