search

thunder2020 / arducopter

Automatically exported from code.google.com/p/arducopter
0 stars 0 forks source link

DataFlash.StartWrite(1); Hangs #20

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
Hi,

When i try to use the DataFlash example of the last DataFlash library, it hangs 
after printing this in Arduino Serial Monitor :

Dataflash Log Test 1.0
Manufacturer:0,0,0

Thanks for your work.

Original issue reported on code.google.com by bill...@gmail.com on 10 Aug 2010 at 7:51

GoogleCodeExporter commented 8 years ago 
It seems to be an hardware issue, Jordi will look at that when the IMU Shield 
arrives in San Diego.

You should close this issue.

Regards,
Greg.

Original comment by bill...@gmail.com on 12 Aug 2010 at 4:14

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
the dataflash is built into the IMU board so if you don't have an IMU you don't 
have a data flash!!

This problem can also happen if you haven't connected the six 1280 SPI pins on 
the APM to the IMU board (aka OilPan).

Please see the attached pic which shows which pins must be connected on the APM.

Original comment by rmackay...@gmail.com on 18 Sep 2010 at 1:24

Attachments:

GoogleCodeExporter commented 8 years ago

Original comment by rmackay...@gmail.com on 18 Sep 2010 at 1:52