Open Tweakerd opened 3 years ago
The modbus configuration options have changed; so with current (2021.12.6) HomeAssistant this will work on an Eastron SDM72D-M (the sign before "type" is the minus sign):
modbus:
sensors: !include sdm72_registers.yaml
Part of sdm72_registers.yaml:
name: Phase 1 line to neutral volts slave: 1 address: 0 input_type: input data_type: float32 precision: 2 unit_of_measurement: V scan_interval: 60 count: 2
name: Phase 2 line to neutral volts slave: 1 address: 2 input_type: input data_type: float32 precision: 2 unit_of_measurement: V scan_interval: 60 count: 2
etc.
Thanks for quick response.
The removal of the platform: yr in the yaml file is not the problem.. I already removed it, because otherwise you can't restart HA due to a error.
As I understoot from your manual, if everything is working well, there should be a new integration popping up in the tab integrations.. That is not happening..
FYI: I'm running HASSIO on a RASPBERRY 4+ 8GB The USB device is: ttyUSB0 /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AB0MSDSX-if00-port0 Subsysteem: tty Apparaatpad: /dev/ttyUSB0 ID: /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AB0MSDSX-if00-port0
I'm connected to a SDM720M-D.. Works great on Domoticz for quite a while..
Of course.. I've changed the register.yaml to comply to the SDM720 instead of the SDM630.. there are quite some different adresses.
hope this information is usefull
regards,