elijahparker
commented
5 years ago Thanks for the report! Can you also send a log report from the VIEW after attempting to change the ISO?
What was the current ISO? Does the app display the correct current ISO?
If you change the ISO on the camera, does the app update?
Thanks!
Elijah
On Sat, Aug 3, 2019 at 7:18 AM photonclock notifications@github.com wrote:
Using the TLView+ app on iPhone Connect to Nikon Z6 Z6 has auto-ISO disabled, ISO manually set to 100 In TLView app, go to Capture, enable Live View Change aperture: works Change shutter: works Change ISO: no response ISO also does not appear to be adjusting during a timelapse run (mode = Shutter + ISO), Aux2 input
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/timelapseplus/VIEW/issues/33?email_source=notifications&email_token=AAJXATQPW7O7MSFWKEIQ4RDQCVZRNA5CNFSM4IJC5KAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HDF734Q, or mute the thread https://github.com/notifications/unsubscribe-auth/AAJXATXU2C76FYGIFWJ66BTQCVZRNANCNFSM4IJC5KAA .
photonclock
Using the TLView+ app on iPhone Connect to Nikon Z6 (firmware v2.0) Z6 has auto-ISO disabled, ISO manually set to 100 In TLView app, go to Capture, enable Live View Change aperture: works Change shutter: works Change ISO: no response ISO also does not appear to be adjusting during a timelapse run (mode = Shutter + ISO), Aux2 input
If I change ISO on the camera via the "i" menu while the View app is in Capture mode with Live View on, the ISO updates in the View app immediately, so communication is definitely working from camera to View - but the View cannot seem to change/control the Z6 ISO.