timeout occured

[GoogleCodeExporter]

What steps will reproduce the problem?
1. reaver -i mon0 -b 20:2b:c1... -c 6 -E -S -l 60 -vv
2. tried it on many AP's around with different options

What is the expected output? What do you see instead?
[+] Waiting for beacon from 20:2B:C1:77:5B:55
[+] Switching mon0 to channel 6
[+] Associated with 20:2B:C1... (ESSID: BTHub3..)
[+] Trying pin 56439823
[!] WARNING: Receive timeout occurred
[+] Trying pin 56439823
[!] WARNING: Receive timeout occurred
[+] Trying pin 56439823
[!] WARNING: Receive timeout occurred
[+] Trying pin 56439823
[!] WARNING: Receive timeout occurred
[+] Trying pin 56439823...

always the same response, timeout and also it keeps trying the same pin but i 
guess that's due to the timeout

What version of the product are you using? On what operating system?
bt5 r1 vmware
ralink rt2800usb

Please provide any additional information below.
all of the ap's i have tried are very close and have top signal

thanks

Original issue reported on code.google.com by dub...@gmail.com on 5 Jan 2012 at 9:22

[GoogleCodeExporter]

Also getting,

/root/compat-wireless-2012-01-13/config.mk:254: "WARNING: CONFIG_CFG80211_WEXT 
will be deactivated or not working because kernel was compiled with 
CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. 
To activate it build your kernel e.g. with CONFIG_LIBIPW=m."
make -C /lib/modules/2.6.39.4/build M=/root/compat-wireless-2012-01-13 modules
make: *** /lib/modules/2.6.39.4/build: No such file or directory.  Stop.
make: *** [modules] Error 2

tryed ln -s /usr/src/linux /lib/modules/2.6.39.4/build

resulting in http://pastebin.com/hzrPzT3W

Original comment by mikedunn...@gmail.com on 23 Jan 2012 at 3:49

[GoogleCodeExporter]

I am at a loss now. Following some of the above suggestions, I went to 
http://www.linuxwireless.org/download/compat-wireless-2.6/compat-wireless-2012-0
1-26.tar.bz2 downloaded the file, extracted it in /usr/src and did a make and 
make install. I rebooted the virtual machine and tried reaver again with 
./reaver -b BSSID -i mon0 -vv but I am still getting the same errors below.

+] Trying pin 12345670
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[!] WARNING: Receive timeout occurred
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x02), re-trying last pin
[+] Trying pin 12345670
[+] Switching mon0 to channel 3
[+] Switching mon0 to channel 6
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[!] WARNING: Receive timeout occurred
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x02), re-trying last pin

The signal is good as I'm almost right beside it. Please help anyone.

Original comment by petros.f...@gmail.com on 27 Jan 2012 at 8:34

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Hi :o)

[Quote]
"I am at a loss now. Following some of the above suggestions, I went to 
http://www.linuxwireless.org/download/compat-wireless-2.6/compat-wireless-2012-0
1-26.tar.bz2 downloaded the file, extracted it in /usr/src and did a make and 
make install."
[\Quote]

As far as I know I think it is a little more complicated than that isn't it ?  
I think you have to remove the old drivers either before or after.

There is also some Kernel patching I believe.

It's not easy in BT to see exactly which driver version you are actually using. 
rt2800usb is pretty much all it tells you, you may have installed a later 
version but the name of the driver does not seem to be dated like windows 
drivers.

Someone better at Backtrack may well give us a simple explanation... hopefully !

:o)   

Original comment by keyfo...@veryrealemail.com on 27 Jan 2012 at 9:57

[GoogleCodeExporter]

ok, thanks.

Original comment by petros.f...@gmail.com on 28 Jan 2012 at 2:21

[GoogleCodeExporter]

The best is to follow aircrack-ng wiki for patching and loadind drivers :
http://aircrack-ng.org/doku.php?id=install_drivers&DokuWiki=8ea5e673ab995dbeca7d
ac61f729c2bf

after patching and compilling your wireless-compat you will want to unload the 
old module and reload with the new one. All is well explained in the link above

Original comment by sheepdes...@gmail.com on 28 Jan 2012 at 5:10

[GoogleCodeExporter]

Hope this helps:
grab an Alfa AWUS036H, 
that has the rtl8187
next, grab a good version
of BT5R2: http://www.allen-sec.com
you'll need to create username
pass to login, keeps the junk out :)
you'll go to my server, grab either 32 or 64 
bit, these versions are custom, tweaked and solid
no junk in them, all done by n1tr0g3n,
you can do a full install or dual boot,
i don't care for virtual (that's me tho)
put it this way, you won't go back to standard BT,
once you have your Alfa, (order it off ebay from Authorized US seller)
i like to open gerix to set the mac spoof, monitor spoof etc
then i uninstall reaver 1.4 and install 1.3
for me, i also run everything through VPN,
i get no problems etc.
don't know why, but 1.4 gave me "time outs" also

sincerely, LT

Original comment by sirbeav...@gmail.com on 19 Apr 2012 at 5:02

[GoogleCodeExporter]

are there any updates of this "aircrack team to get Reaver integrated into the 
aircrack suite"?

Original comment by neureith...@gmail.com on 19 Feb 2013 at 8:34