search

timschneider / CNCGraf7Post

CNCGraf7 / NC-EASY post processor for fusion 360
GNU General Public License v3.0
4 stars 5 forks source link

Homing Z 100 #1

Closed paul-ferragut closed 5 years ago

paul-ferragut commented 5 years ago

Thank you for providing this Post processor! for the gcode to work with my CNC "Haase AL 1290" I removed the part Homing Z 100 to 0

timschneider commented 5 years ago

@paul-ferragut this is actually a setting you can change out of fusion. So i would consider tihs as no issue.

paul-ferragut commented 5 years ago

Yes absolutely, not an issue, I was always getting an error in CNCGraf "The Height of axis Z equals: 140.00! Please check in the dialogue window "Positions" and "Machine parameters" the zero point und the monitoring settings of Z axis." This was because of Homing Z, now I set homing Z around 10