Create code for the FX2 to act as a USB-UART - Githubissues

timvideos / HDMI2USB-numato-opsis-hardware

The Numato Opsis board is the first fully open source HDMI2USB board.

Creative Commons Attribution Share Alike 4.0 International

105 stars 42 forks source link

Create code for the FX2 to act as a USB-UART #1

Closed mithro closed 9 years ago

mithro commented 9 years ago

From @mithro on July 17, 2015 7:30

The FX2 should be loadable with firmware which makes it appear like a CDC-ACM serial port and is connected to the FPGA.

The FX2 has its two hardware UARTs connected to the FPGA;

Two hardware UARTs
- Port 0
- RX - Cypress (Pin 41) -> FPGA (Pin P18 / IO_L71N_1) -- Incorrectly labeled CY_RXD1
- TX - FPGA (Pin T17 / IO_L72N_1) -> Cypress (Pin 40) -- Incorrectly labeled CY_TXD1
- Port 1
- RX - Cypress (Pin 43) -> FPGA (Pin P17 / IO_L71P_1) -- Incorrectly labeled CY_RXD0
- TX - FPGA (Pin R17 / IO_L72P_1) -> Cypress (Pin 42) -- Incorrectly labeled CY_TXD0

Copied from original issue: mithro/numato-opsis-sample-code#1

mithro commented 9 years ago

https://github.com/timvideos/HDMI2USB-numato-opsis-sample-code/issues/1