Program not loaded when powered from dumb power supply until reset button pressed

tinyfpga / TinyFPGA-BX

Other

273 stars 94 forks source link

Program not loaded when powered from dumb power supply until reset button pressed #20

Open yodaldevoid opened 5 years ago

yodaldevoid commented 5 years ago

I have found that when powering the TinyFPGA-BX from a "dumb" power supply the bootloader does not start and therefore the last loaded program is not loaded until the reset button is pressed.

tinyprog shows the board with a 1.0.0 bootloader, and says that the bootloader is at the newest version.

reubenstr commented 3 years ago

I had the same issue when powering a TinyFPGA Bx with 3.3v directly to the 3.3v pin. After removing 3.3v to the 3.3v pin and applying 3.3v to the VIN pin the TinyFPGA booted upon power up as expected.