Furthermore, there are no general instructions for how to plug things together, and what to connect, and what to expect, where to get the debug logs.
Things that are obvious after being introduced to it, and a short summary can help confirming what is expected.
I.e.:
[ ] there are two /dev/ttyUSB# interfaces, but only one of them (usually the second) is containing logs
[ ] there are two USB interfaces, and the shell will usually be visible on the FTDI "DEBUG" interface, unless it is configured over USB, in which case it will be in the USB3 "DATA" interface. The logs are usually configured to be over the FTDI "DEBUG" interface
[ ] non-standard baud rate in some revisions
[ ] The connector labels are in-between the connectors, ambiguous between whether they are for the left or right connector.
The quickstart section is out of date. This require users to go bug us to get started and is not pleasant. https://tinyclunx33.tinyvision.ai/md_carrier_devkit.html#autotoc_md1
Furthermore, there are no general instructions for how to plug things together, and what to connect, and what to expect, where to get the debug logs.
Things that are obvious after being introduced to it, and a short summary can help confirming what is expected.
I.e.:
/dev/ttyUSB#interfaces, but only one of them (usually the second) is containing logs