search

tmk / tmk_keyboard

Keyboard firmwares for Atmel AVR and Cortex-M
3.97k stars 1.7k forks source link

m0110- Elite-C powers off when plugged into keyboard #713

Open hsully03 opened 2 years ago

hsully03 commented 2 years ago

The Elite-C powers on and is detected by hid_listen properly when it is not connected to the m0110, but it powers off as soon as it is plugged into the keyboard. I have a straight 4p4c cable with wire 1 going into GND, wire 2 going into D0, wire 3 going into D1 and wire 4 going into VCC. I used the pinout on this wiki article to convert the pinouts on the geekhack page into the Elite-C's. What am I doing wrong?

tmk commented 2 years ago

Seems that you are doing correct for the microcontroller pin names. Make sure you are not getting connector pinout reverse topologically.