Cannot boot kernel (u-boot cannot find a suitable image)

[XFer012]

Hello, using the latest image (0.33) with Lichee RV Dock.

U-boot cannot find the kernel image.

Boot log:

[131]HELLO! BOOT0 is starting! [134]BOOT0 commit : 882671f [137]set pll start [138]periph0 has been enabled [141]set pll end [143]board init ok [145]DRAM only have internal ZQ!! [148]get_pmu_exist() = -1 [150]ddr_efuse_type: 0x0 [153][AUTO DEBUG] single rank and full DQ! [157]ddr_efuse_type: 0x0 [160][AUTO DEBUG] rank 0 row = 15 [163][AUTO DEBUG] rank 0 bank = 8 [167][AUTO DEBUG] rank 0 page size = 2 KB [170]DRAM BOOT DRIVE INFO: V0.24 [173]DRAM CLK = 792 MHz [176]DRAM Type = 3 (2:DDR2,3:DDR3) [179]DRAMC ZQ value: 0x7b7bfb [182]DRAM ODT value: 0x42. [184]ddr_efuse_type: 0x0 [187]DRAM SIZE =512 M [191]DRAM simple test OK. [193]dram size =512 [195]card no is 0 [196]sdcard 0 line count 4 [199][mmc]: mmc driver ver 2021-04-2 16:45 [208][mmc]: Wrong media type 0x0 [211][mmc]: Try SD card 0 [309][mmc]: HSSDR52/SDR25 4 bit [311][mmc]: 50000000 Hz [314][mmc]: 15268 MB [315][mmc]: SD/MMC 0 init OK!!! [351]Loading boot-pkg Succeed(index=1). [355]Entry_name = opensbi [358]Entry_name = dtb [360]Entry_name = u-boot [364]Adding DRAM info to DTB. [369]Jump to second Boot.

OpenSBI v1.1

---

/ \ / __	_					_ __	(___		_)							' \ / \ '_ \ ___ \	_ <				__			_)	__/			____)		_)			_ ____/	./ _	_		_	_____/	__/___
_

Platform Name : Sipeed Lichee RV Dock Platform Features : medeleg Platform HART Count : 1 Platform IPI Device : --- Platform Timer Device : --- @ 0Hz Platform Console Device : uart8250 Platform HSM Device : sun20i-d1-ppu Platform Reboot Device : sunxi-wdt-reset Platform Shutdown Device : --- Firmware Base : 0x40000000 Firmware Size : 240 KB Runtime SBI Version : 1.0

Domain0 Name : root Domain0 Boot HART : 0 Domain0 HARTs : 0* Domain0 Region00 : 0x0000000040000000-0x000000004003ffff () Domain0 Region01 : 0x0000000000000000-0xffffffffffffffff (R,W,X) Domain0 Next Address : 0x000000004a000000 Domain0 Next Arg1 : 0x0000000044000000 Domain0 Next Mode : S-mode Domain0 SysReset : yes

Boot HART ID : 0 Boot HART Domain : root Boot HART Priv Version : v1.11 Boot HART Base ISA : rv64imafdcvx Boot HART ISA Extensions : time Boot HART PMP Count : 8 Boot HART PMP Granularity : 2048 Boot HART PMP Address Bits: 38 Boot HART MHPM Count : 0 Boot HART MIDELEG : 0x0000000000000222 Boot HART MEDELEG : 0x000000000000b109

U-Boot 2022.07-rc3-gafc07cec-dirty (Jul 21 2022 - 05:36:22 +0000)

DRAM: 512 MiB sunxi_set_gate: (CLK#24) unhandled Core: 51 devices, 21 uclasses, devicetree: board WDT: Started watchdog@6011000 with servicing (16s timeout) MMC: mmc@4020000: 0, mmc@4021000: 1 Loading Environment from nowhere... OK In: serial@2500000 Out: serial@2500000 Err: serial@2500000 Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr 716176 bytes read in 128 ms (5.3 MiB/s)

Executing script at 41900000

No FIT subimage unit name SCRIPT FAILED: continuing... No EFI system partition BootOrder not defined EFI boot manager: Cannot load any image starting USB... Bus usb@4101000: USB EHCI 1.00 Bus usb@4101400: USB OHCI 1.0 Bus usb@4200000: USB EHCI 1.00 Bus usb@4200400: USB OHCI 1.0 scanning bus usb@4101000 for devices... 1 USB Device(s) found scanning bus usb@4101400 for devices... 1 USB Device(s) found scanning bus usb@4200000 for devices... 1 USB Device(s) found scanning bus usb@4200400 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device No ethernet found. missing environment variable: pxeuuid Retrieving file: pxelinux.cfg/00000000 No ethernet found. Retrieving file: pxelinux.cfg/0000000 No ethernet found. Retrieving file: pxelinux.cfg/000000 No ethernet found. Retrieving file: pxelinux.cfg/00000 No ethernet found. Retrieving file: pxelinux.cfg/0000 No ethernet found. Retrieving file: pxelinux.cfg/000 No ethernet found. Retrieving file: pxelinux.cfg/00 No ethernet found. Retrieving file: pxelinux.cfg/0 No ethernet found. Retrieving file: pxelinux.cfg/default-riscv-sunxi-sunxi No ethernet found. Retrieving file: pxelinux.cfg/default-riscv-sunxi No ethernet found. Retrieving file: pxelinux.cfg/default-riscv No ethernet found. Retrieving file: pxelinux.cfg/default No ethernet found. Config file not found No ethernet found. No ethernet found. =>

[XFer012]

OK if building via docker-compose, kernel tag d1-wip-v5.18-rc4

[tmolteno]

I think we need to revert to this kernel tag. Will do this in the next release. I have tried asking question of the developers but all are (unsurprisingly) busy. Apparently kernel mainline is nearly good enough now :)