Closed awigen closed 7 years ago
Thank you for this! Do you have a plan on how to print it?
I made it printable by making base grow by 45 deg. Also added some more set screws that I've missed having there. Merging.
Hi,
I printed it "upside down" compared to before, but the new design should be good as well.
https://owncloud.wigen.net/index.php/s/e9xgo50N8701FZm
Cheers,
Alex
On 04/04/17 00:42, tobbelobb wrote:
I made it printable by making base grow by 45 deg. Also added some more set screws that I've missed having there. Merging.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/tobbelobb/hangprinter/pull/6#issuecomment-291295211, or mute the thread https://github.com/notifications/unsubscribe-auth/AFR2JRqvM23jThpsvSwH7WjY7serC8nUks5rsXW5gaJpZM4MyBKn.
Cool! I thought the overhangs would be too much. I like your version better if it actually works.
I'm also interested if the corner will be strong enough to hang without the bottom_plate flexing.
Also hollow out the frame to allow this axle