search

tobetter / linux

Linux kernel source tree
Other
69 stars 30 forks source link

USB 3.0 not always working #11

Closed c0d3z3r0 closed 7 years ago

c0d3z3r0 commented 8 years ago

dmesg:

[ 0.263690] usbcore: registered new interface driver usbfs [ 0.263775] usbcore: registered new interface driver hub [ 0.263944] usbcore: registered new device driver usb [ 1.238987] usbcore: registered new interface driver usb-storage [ 1.598565] usbcore: registered new interface driver usbhid [ 1.603651] usbhid: USB HID core driver [ 5.968021] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.971402] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.021169] exynos-ohci 12120000.usb:: USB Host Controller [ 6.032793] exynos-ohci 12120000.usb:: new USB bus registered, assigned bus number 1 [ 6.040368] exynos-ohci 12120000.usb:: irq 130, io mem 0x12120000 [ 6.101296] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.106601] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.113830] usb usb1: Product: USB Host Controller [ 6.118656] usb usb1: Manufacturer: Linux 4.7.2+ ohci_hcd [ 6.123931] usb usb1: SerialNumber: 12120000.usb: [ 6.129286] hub 1-0:1.0: USB hub found [ 6.137242] exynos-ehci 12110000.usb:: EHCI Host Controller [ 6.148942] exynos-ehci 12110000.usb:: new USB bus registered, assigned bus number 2 [ 6.149048] exynos-ehci 12110000.usb:: irq 130, io mem 0x12110000 [ 6.167021] exynos-ehci 12110000.usb:: USB 2.0 started, EHCI 1.00 [ 6.172277] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.178462] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.178468] usb usb2: Product: EHCI Host Controller [ 6.178474] usb usb2: Manufacturer: Linux 4.7.2+ ehci_hcd [ 6.178480] usb usb2: SerialNumber: 12110000.usb: [ 6.179160] hub 2-0:1.0: USB hub found [ 6.181027] exynos-dwc3 usb3-0:: no suspend clk specified [ 6.183925] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 6.184317] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 6.185206] exynos-dwc3 usb3-1:: no suspend clk specified [ 6.186802] usb_phy_generic.2.auto supply vcc not found, using dummy regulator [ 6.187207] usb_phy_generic.3.auto supply vcc not found, using dummy regulator [ 6.211272] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 3 [ 6.211914] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.211921] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.211927] usb usb3: Product: xHCI Host Controller [ 6.211932] usb usb3: Manufacturer: Linux 4.7.2+ xhci-hcd [ 6.211936] usb usb3: SerialNumber: xhci-hcd.4.auto [ 6.212537] hub 3-0:1.0: USB hub found [ 6.213275] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 4 [ 6.213433] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.213748] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 6.213754] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.213759] usb usb4: Product: xHCI Host Controller [ 6.213763] usb usb4: Manufacturer: Linux 4.7.2+ xhci-hcd [ 6.213767] usb usb4: SerialNumber: xhci-hcd.4.auto [ 6.214563] hub 4-0:1.0: USB hub found [ 6.215385] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5 [ 6.215988] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.215994] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.216001] usb usb5: Product: xHCI Host Controller [ 6.216006] usb usb5: Manufacturer: Linux 4.7.2+ xhci-hcd [ 6.216010] usb usb5: SerialNumber: xhci-hcd.5.auto [ 6.216782] hub 5-0:1.0: USB hub found [ 6.217697] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6 [ 6.217848] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.218075] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 6.218081] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.218085] usb usb6: Product: xHCI Host Controller [ 6.218090] usb usb6: Manufacturer: Linux 4.7.2+ xhci-hcd [ 6.218095] usb usb6: SerialNumber: xhci-hcd.5.auto [ 6.218832] hub 6-0:1.0: USB hub found [ 6.536996] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 6.679531] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610 [ 6.684753] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.684756] usb 3-1: Product: USB2.0 Hub [ 6.684759] usb 3-1: Manufacturer: GenesysLogic [ 6.693652] hub 3-1:1.0: USB hub found [ 6.727024] usb 5-1: new high-speed USB device number 3 using xhci-hcd [ 6.847036] usb 1-1: new full-speed USB device number 2 using exynos-ohci [ 6.877902] usb 5-1: New USB device found, idVendor=0bda, idProduct=8153 [ 6.883117] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 6.890279] usb 5-1: Product: USB 10/100/1000 LAN [ 6.894900] usb 5-1: Manufacturer: Realtek [ 6.899003] usb 5-1: SerialNumber: 000001000000 [ 6.927181] usbcore: registered new interface driver r8152 [ 6.936319] usbcore: registered new interface driver cdc_ether [ 7.066066] usb 1-1: New USB device found, idVendor=041e, idProduct=30d3 [ 7.083736] usb 5-1: reset high-speed USB device number 3 using xhci-hcd [ 7.083746] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 7.083752] usb 1-1: SerialNumber: 140113000788 [ 7.117251] input: HID 041e:30d3 as /devices/platform/12120000.usb:/usb1/1-1/1-1:1.3/0003:041E:30D3.0001/input/input0 [ 7.177171] hid-generic 0003:041E:30D3.0001: input,hidraw0: USB HID v1.00 Device [HID 041e:30d3] on usb-12120000.usb:-1/input3 [ 7.346890] usbcore: registered new interface driver snd-usb-audio [ 7.977085] usb 3-1.1: new high-speed USB device number 3 using xhci-hcd [ 8.118821] usb 3-1.1: New USB device found, idVendor=1e68, idProduct=008a [ 8.124230] usb 3-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 8.131602] usb 3-1.1: Product: DS picco SSD [ 8.135760] usb 3-1.1: Manufacturer: TrekStor [ 8.140219] usb 3-1.1: SerialNumber: 20151111311B [ 8.163058] usbcore: registered new interface driver uas [ 14.177117] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd [ 14.199768] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616 [ 14.204984] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.212147] usb 4-1: Product: USB3.0 Hub [ 14.215988] usb 4-1: Manufacturer: GenesysLogic [ 14.230097] hub 4-1:1.0: USB hub found [ 260.934897] usb 3-1.1: USB disconnect, device number 3 [ 270.516023] usb 4-1: USB disconnect, device number 2 [ 270.629382] usb 3-1: reset high-speed USB device number 2 using xhci-hcd [ 271.146121] usb 4-1: new SuperSpeed USB device number 3 using xhci-hcd [ 271.168736] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616 [ 271.173999] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 271.181189] usb 4-1: Product: USB3.0 Hub [ 271.185017] usb 4-1: Manufacturer: GenesysLogic [ 271.206155] hub 4-1:1.0: USB hub found [ 271.486057] usb 4-1.1: new SuperSpeed USB device number 4 using xhci-hcd [ 271.507123] usb 4-1.1: New USB device found, idVendor=1e68, idProduct=008a [ 271.512556] usb 4-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 271.519914] usb 4-1.1: Product: DS picco SSD [ 271.524095] usb 4-1.1: Manufacturer: TrekStor [ 271.528459] usb 4-1.1: SerialNumber: 20151111311B [ 271.534158] usb 4-1.1: USB controller xhci-hcd.4.auto does not support streams, which are required by the UAS driver. [ 271.543756] usb 4-1.1: Please try an other USB controller if you wish to use UAS. [ 271.551182] usb-storage 4-1.1:1.0: USB Mass Storage device detected [ 271.557924] scsi host0: usb-storage 4-1.1:1.0 [ 311.669882] usb 4-1.1: USB disconnect, device number 4 [ 323.737746] usb 3-1-port1: connect-debounce failed [ 323.742604] usb 3-1: USB disconnect, device number 2 [ 323.856536] usb 4-1: USB disconnect, device number 3 [ 324.076455] usb 3-1: new high-speed USB device number 5 using xhci-hcd [ 324.218979] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610 [ 324.224241] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 324.231400] usb 3-1: Product: USB2.0 Hub [ 324.235299] usb 3-1: Manufacturer: GenesysLogic [ 324.261856] hub 3-1:1.0: USB hub found [ 325.546471] usb 3-1.1: new high-speed USB device number 6 using xhci-hcd [ 325.688272] usb 3-1.1: New USB device found, idVendor=1e68, idProduct=008a [ 325.693727] usb 3-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 325.701092] usb 3-1.1: Product: DS picco SSD [ 325.705239] usb 3-1.1: Manufacturer: TrekStor [ 325.709644] usb 3-1.1: SerialNumber: 20151111311B [ 326.446648] usb 4-1: new SuperSpeed USB device number 5 using xhci-hcd [ 326.469403] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616 [ 326.474684] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 326.481815] usb 4-1: Product: USB3.0 Hub [ 326.485668] usb 4-1: Manufacturer: GenesysLogic [ 326.502189] hub 4-1:1.0: USB hub found

c0d3z3r0 commented 8 years ago

On the 4.8 branch USB 3.0 does not work at all:

[ 114.162408] usb 1-1: USB disconnect, device number 2 [ 114.162408] usb 1-1: USB disconnect, device number 2 [ 117.000031] usb usb1-port1: connect-debounce failed [ 117.000031] usb usb1-port1: connect-debounce failed

jobenvil commented 8 years ago

@c0d3z3r0 not really, indeed it works, but maybe not with your USB3 Adapter. I realized this testing 4.8-rc5. With JMICRON567 it doesn't work anymore but with ASMEDIA (see my last post here) it works, but without UAS.

ardje commented 8 years ago

I actually have very good and very bad experiences with USB3. The bad: Using an epiphan AV.IO 4k, an USB3 UVC class video grabber and vlc I can repeatedly disconnect the internal USB3 hub, which needs a powercycle to recover even if the epiphan is disconnected. With 3.10 I can usually send a usbreset to the USB2 counterpart of the internal USB3 hub, and reset the USB3 hub like that, after which it re-appears. So there are is one obvious problem: the kernel is unable to send a proper reset to the USB3 hub upon boot. Come to think of it: maybe the problem is, that it sends it to the USB2 hub too, and hence the sense of the USB3 hub fails. Nah, that should have been a problem everytime. The good: (only) After a power cycle, the cloudshell feels rock sold, and is blazingly fast with a WD-RED 2.5" disk.

jobenvil commented 8 years ago

Maybe these threads could interest you

c0d3z3r0 commented 7 years ago

Closing this since I sold my Odroid. I'm fed up with ARM...