Closed andrem1987 closed 6 years ago
I found the solution. After the update the features feature:install openhab-transport-serial
and feature:install esh-io-transport-mqtt
had to be reinstalled.
Unfortunately only some errors were fixed by reinstalling these features.
Now the binding has problems connecting to the mqtt-broker. The openhab.log gives me the following errors:
2018-05-31 16:28:42.776 [ERROR] [rotocol.mqtt.MySensorsMqttConnection] - No connection to broker: mosquitto
2018-05-31 16:28:42.918 [ERROR] [rotocol.mqtt.MySensorsMqttConnection] - Failed connecting to bridge...next retry in 10 seconds (Retry No.:0)
The MQTT implementation in OH2 (ESH) changed. This was a hard nut to crack, so it took me a while.
Here are the steps you need to do:
1) Rename: org.eclipse.smarthome.mqtt.cfg to org.eclipse.smarthome.mqttbroker.cfg
2) Change the content to:
name=mosquitto
host=192.168.2.3
secure=false
port=1883
username=USERNAME
password=PASSWORD
retain=false
If you're using a secure connection (SSL): change secure to true and use the correct port.
This is solved with the latest commits.
Hey,
i just updated my OpenHAB installation to version 2.3. Since then the MySensors-Binging can't be loaded. The log shows the following errors: