Closed jdolecek closed 6 years ago
todbot
commented
8 years ago Hi, Does it crash with or without blink(1) plugged in? Does the older version still work? You can get older versions by scrolling down on this page: https://github.com/todbot/blink1/releases Perhaps the version you last used was this one: https://github.com/todbot/blink1/releases/tag/v1.95
jdolecek
commented
8 years ago It crashes with or without the device connected. I tried back to 1.9 and it would run the program, but not recognize the device. It said there was no driver.
On Mon, Apr 11, 2016 at 5:55 PM, Tod E. Kurt notifications@github.com wrote:
Hi, Does it crash with or without blink(1) plugged in? Does the older version still work? You can get older versions by scrolling down on this page: https://github.com/todbot/blink1/releases Perhaps the version you last used was this one: https://github.com/todbot/blink1/releases/tag/v1.95
— You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub https://github.com/todbot/blink1/issues/287#issuecomment-208602703
todbot
commented
8 years ago When you say "it says there's no driver", you mean Windows, correct? If so, and this is an original blink(1) (not a blink(1) mk2). Then try putting a USB hub in between the blink(1) and your computer. Early blink(1)s had issues with certain PC motherboards.
todbot
commented
6 years ago I think this is fixed in Blink1Control2 : https://github.com/todbot/Blink1Control2/releases
I installed the software with no errors, but it immediately crashes on startup. I don't even get the screen loaded before it crashes. I've tried uninstall/reinstall. Win7 x64 Intel i5 plenty of RAM, nothing else really remarkable. I've had older versions that worked in the past, but I haven't used the device in a long time.