search

todxx / teamredminer

AMD GPU Optimized Cryptocurrency Miner
960 stars 205 forks source link

5700XT low hash rate on 8.0 ethash: 4.310Mh #183

Open BeSseR89 opened 3 years ago

BeSseR89 commented 3 years ago

Hi I am running Windows 10 20H2 Adrenalin 20.12.1 teamreadminer v0.8.00

With teamredminer-v0.7.22-win the hash rate is 51mh/s any thoughts ?

thanks Bence

syl3ntz commented 3 years ago

B448 on Headed 5700xt and getting 8.890MH/s also

syl3ntz commented 3 years ago

Miner starts off with "GPU 0 DAG allocation trying 8176.0 - 512.0 = 7664.0 MiB." which is most likely not enough (512MB) for a headed Windows GPU

DrGuns4Hands commented 3 years ago

Similarly low Hashrate around 6 MH/s. This was my first attempt using team red miner. Also I kept getting a driver timeout warning from the AMD software even at stock settings. Switched back over to Phoenix Miner which I was using before and no issues there.

Windows 10 20H2 Adrenalin 20.12.1 teamreadminer v0.8.00

EDIT: Now that I think about it, It might have said 6GH/s which would be insane. Just checked the reported category on nanopool and it shows a gargantuan spike that would be impossible for a single GPU.

pdieppa commented 3 years ago

Similarly low Hashrate around 6 MH/s. This was my first attempt using team red miner. Also I kept getting a driver timeout warning from the AMD software even at stock settings. Switched back over to Phoenix Miner which I was using before and no issues there.

Windows 10 20H2 Adrenalin 20.12.1 teamreadminer v0.8.00

EDIT: Now that I think about it, It might have said 6GH/s which would be insane. Just checked the reported category on nanopool and it shows a gargantuan spike that would be impossible for a single GPU.

The extremely high hash rate usually happens when your GPU crashes. What are your the OC settings?

DrGuns4Hands commented 3 years ago

The extremely high hash rate usually happens when your GPU crashes. What are your the OC settings?

Stock

pdieppa commented 3 years ago

The extremely high hash rate usually happens when your GPU crashes. What are your the OC settings?

Stock

It would be nice if you could provide a bit more. Run the miner and open MSI Afterbuner or AMD Radeon software and provide the Core Voltage, Core Clock Mhz and Memory Clock Mhz . Also provide the power usage. This should help the group understand your environment.

DrGuns4Hands commented 3 years ago

It would be nice if you could provide a bit more. Run the miner and open MSI Afterbuner or AMD Radeon software and provide the Core Voltage, Core Clock Mhz and Memory Clock Mhz . Also provide the power usage. This should help the group understand your environment.

Don't have access to it at the moment, but the stock settings are: Core Voltage 1200mV, Core Clock 2019, Memory Clock 1750. Not sure what you mean provide the power usage(750W PSU). I tried running the miner with stock settings and it had my AMD drivers crashing before I could even start tuning it.

I switched back to Phoenix Miner running 1050mV, Core Clock 1600, Memory 1760.

As it is I'll probably just wait and try again with the next release. Got a lot of other stuff on my plate at the moment and I'd rather stick with the stable 51 I'm getting on Phoenix than spend too much time fighting for the extra couple MH/s at this time.

UselessGuru commented 3 years ago

Same problem here. B-Mode not working on RX5700 (no matter what OC I set) A-Mode is working fine.

russ2048 commented 3 years ago

B mode with two 5700XT one stuck at 31.1 mh/s and the other running fine at 55 mh/s Both run fine on A mode Using onboard video for display Windows 10 20H2 Adrenalin 20.11.2 teamreadminer v0.8.00

UselessGuru commented 3 years ago

This is still the case with 0.8.1

miner493r commented 3 years ago

I have just started using teamredminer v0.8.1 a few days ago with similar low hashrates. When mining ethereum the hashrate should be around 50Mh/s, but the actual performance does not exceed 3.6 Mh/s. I have a 750w psu and the power draw, when running the script below,is about 120w. I am running Manjaro on kernel 5.4.105. The driver is opencl-amd 20.50. The GPU is using compute mode. Any thoughts of what could be causing this? 

start_eth.h Variables
export GPU_MAX_ALLOC_PERCENT=100
export GPU_SINGLE_ALLOC_PERCENT=100
export GPU_MAX_HEAP_SIZE=100
export GPU_USE_SYNC_OBJECTS=1

Command Executed
./teamredminer -a ethash -o stratum+tcp://daggerhashimoto.usa-east.nicehash.com:3353 -u [MY BTC ADDRESS] --eth_config=B

Starting Output
Team Red Miner version 0.8.1
[2021-03-22 16:15:54] Auto-detected AMD OpenCL platform 1
[2021-03-22 16:15:54] Initializing GPU 0.
[2021-03-22 16:15:55] GPU 0 Starting tuning.
[2021-03-22 16:15:55] --------------------------------------------------------------------------
[2021-03-22 16:15:55] GPU 0 Miner detected 3 connected monitor(s). This means we will use less
[2021-03-22 16:15:55] aggressive settings to accomodate for gpu rendering while mining. These
[2021-03-22 16:15:55] settings could be either insufficient or overly conservative. In the
[2021-03-22 16:15:55] former case you'll experience sluggish graphics behavior, while in the
[2021-03-22 16:15:55] latter you can lose more hashrate than necessary. After observing the 
[2021-03-22 16:15:55] chosen config by the miner by pressing 's' when the miner is running and
[2021-03-22 16:15:55] has completed the auto-tuning process, you can then adjust this config
[2021-03-22 16:15:55] using the --eth_config command line parameter. For more or less intensity,
[2021-03-22 16:15:55] increase/decrease the numerical value in steps of 8 until your graphics
[2021-03-22 16:15:55] interaction is acceptable for your setup.
[2021-03-22 16:15:55] 
[2021-03-22 16:15:55] For more info, see the USAGE.txt file in the release package.
[2021-03-22 16:15:55] --------------------------------------------------------------------------
[2021-03-22 16:15:55] Successfully initialized GPU 0: Navi with 40 CU (PCIe 0c:00.0) 
[2021-03-22 16:15:55] GPU 0 DAG allocation trying 8176.0 - 768.0 = 7408.0 MiB.
[2021-03-22 16:15:55] Watchdog thread starting.

Actual Performance
----------------------------------------------------------------------------------------------------------------------
[2021-03-22 12:08:24] Mining ethash with 1 GPU workers
[2021-03-22 12:08:24] GPU PCIe         CUs CoreMHz SocMHz MemMHz TEdge TJct  TMem  FanPct  FanRpm  VDDC    ETH Cfg
[2021-03-22 12:08:24] 0   0c:00.0      40  2065    1266   875    64C   68C   62C   23.92%   839    1181 mV  B224
[2021-03-22 12:08:24] 
[2021-03-22 12:08:24] Stats Uptime: 0 days, 00:36:01
[2021-03-22 12:08:24] ----------------------------------------- GPU Status -------------------------------------------
[2021-03-22 12:08:24] GPU 0 [64C, fan 23%]       ethash: 3.492Mh/s, avg 3.401Mh/s, pool 2.883Mh/s a:29 r:0 hw:0
[2021-03-22 12:08:24] Total                      ethash: 3.492Mh/s, avg 3.401Mh/s, pool 2.883Mh/s a:29 r:0 hw:0
[2021-03-22 12:08:24] ----------------------------------------- Pool Status ------------------------------------------
[2021-03-22 12:08:24] daggerhashimoto.usa-east.nicehash.com ethash: 3.492Mh/s, avg 3.365Mh/s, pool 2.883Mh/s a:29 r:0
[2021-03-22 12:08:24] ------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------
[2021-03-22 12:31:50] Mining ethash with 1 GPU workers
[2021-03-22 12:31:50] GPU PCIe         CUs CoreMHz SocMHz MemMHz TEdge TJct  TMem  FanPct  FanRpm  VDDC    ETH Cfg
[2021-03-22 12:31:50] 0   0c:00.0      40  2065    1266   875    61C   66C   62C   23.92%   839    1181 mV  B384 (*)
[2021-03-22 12:31:50] (*) Gpu is still tuning.
[2021-03-22 12:31:50] 
[2021-03-22 12:31:50] Stats Uptime: 0 days, 00:01:00
[2021-03-22 12:31:50] ----------------------------------------- GPU Status -------------------------------------------
[2021-03-22 12:31:50] GPU 0 [61C, fan 23%]       ethash: 3.555Mh/s, avg 2.734Mh/s, pool 0.000 h/s a:0 r:0 hw:0
[2021-03-22 12:31:50] Total                      ethash: 3.555Mh/s, avg 2.734Mh/s, pool 0.000 h/s a:0 r:0 hw:0
[2021-03-22 12:31:50] ----------------------------------------- Pool Status ------------------------------------------
[2021-03-22 12:31:50] daggerhashimoto.usa-east.nicehash.com ethash: 3.555Mh/s, avg 2.607Mh/s, pool 0.000 h/s a:0 r:0
[2021-03-22 12:31:50] ------------------------------------------------------------------------------------------------
oukenteikan commented 3 years ago

I have exactly the same problem, 5700 XT with B-mode on Windows. Using more VRAM but obtaining a low hash rate, while A-mode works fine. Both my system and Radeon software are up to date.

mikoshibeta1 commented 3 years ago

I sugest you might want to lower your coreMhz to 1400ish and turning down socMHZ TO 1080/1100ish VDDC Around 800. For better results you would want to cranck memory clock to 1800mhz cause it has biggest Impact on hashrate. If you run into issues with Bmode make sure to not open your adrenalin window after you run Miner cause it conflicts with radeon drivers and prevents it to work properly in bmode resulting lower hashrate. Watch Son of a Tech videos about optimizing 5700xt for mining. Also check windows power plan and maximize it to best performance.