New R mode does not accept under 1000 mhz after rebooting or restarting

todxx / teamredminer

AMD GPU Optimized Cryptocurrency Miner

957 stars 204 forks source link

New R mode does not accept under 1000 mhz after rebooting or restarting #635

Open 34beuwolf opened 2 years ago

34beuwolf commented 2 years ago

Hi. On rx 6700xt with Teamredminer 10.1 also R mode activated, When i changed core clock to 900 mhz miner accept 900 mhz with current voltage settings and working with no issue but if i reboot or restart miner , miner deny my voltage setttings. When i set 1000 mhz core clock there was no issue while i restarting or rebooting. I tried on several rigs and cards also i tried with new and old drivers but they did not work.

pdieppa commented 2 years ago

I think the gains on the 6700XT are so minimal that is may not be worth it. What are your current OC settings?

CamJava007 commented 2 years ago

I personally have my 6700xt set to Core 1000mhz, Mem 1075mhz, VDDC 700mv... I get 47 Mh/s at 91W

pdieppa commented 2 years ago

I personally have my 6700xt set to Core 1000mhz, Mem 1075mhz, VDDC 700mv... I get 47 Mh/s at 91W

Oh, I got 5 6700XTs and I got them down to 69-71 watts @ 46.3Mh/s without using R mode.

I updated these settings yesterday and so far not a single rejected or invalid share. I was able to drop 100 watts from this rig

CamJava007 commented 2 years ago

Sweet...I'll definitely give those a try !