Open Feraty opened 7 months ago
Hi Feraty,
Thank you for the interest. At the moment i did not developt this further because i did not have the need for freq. input. Maybe in a later stage i can look into it. You can always copy the repo and start developing yourself :)
I have all the canbus data needed for sending it to the ecu
ah, will do :). could you send the data to my mail
thanks in advance!
sure i can, your name sounds dutch ? Where are you from.
What kind of ecu and car do you have ?
Met vriendelijke groeten, Tolunay Gul
From: Feraty @.> Sent: Monday, February 26, 2024 21:48 To: tolunaygul/IObox-emulator-haltech @.> Cc: tolunay gul @.>; Comment @.> Subject: Re: [tolunaygul/IObox-emulator-haltech] Suggestion Frequency on DPI pins? (Issue #4)
ah, will do :). could you send the data to my mail @.**@.>
thanks in advance!
— Reply to this email directly, view it on GitHubhttps://github.com/tolunaygul/IObox-emulator-haltech/issues/4#issuecomment-1965239560, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQG7BU7CGT7SX64OCW57LZLYVTYINAVCNFSM6AAAAABD23ONLKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRVGIZTSNJWGA. You are receiving this because you commented.Message ID: @.***>
I'm from Nieuwegein (city below Utrecht). i've got a Fiat punto MK1 with a (newer)Abarth 1.4 16v turbo engine (200bhp/300nm) running on a haltech elite 1500 and WB1.
and you?
groet, Ruben
Dacht al te herkennen aan de naam ! Ikzelf kom uit Tilburg en heb een golf 2 staan met 1.8T 20v motor. Er zat een 1500 in, maar die is verkocht en er komt binnenkort een R3 voor terug waarschijnlijk.
Misschien beter om via whatsapp of iets verder te praten? In nl kom je niet vaak haltech tegen, vanwaar de keuze?
Met vriendelijke groeten, Tolunay Gul
From: Feraty @.> Sent: Monday, February 26, 2024 21:56 To: tolunaygul/IObox-emulator-haltech @.> Cc: tolunay gul @.>; Comment @.> Subject: Re: [tolunaygul/IObox-emulator-haltech] Suggestion Frequency on DPI pins? (Issue #4)
I'm from Nieuwegein (city below Utrecht). i've got a Fiat punto MK1 with a (newer)Abarth 1.4 16v turbo engine (200bhp/300nm) running on a haltech elite 1500 and WB1.
and you?
groet, Ruben
— Reply to this email directly, view it on GitHubhttps://github.com/tolunaygul/IObox-emulator-haltech/issues/4#issuecomment-1965250881, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQG7BU7GDVAYF6CQEDL4SSTYVTZGJAVCNFSM6AAAAABD23ONLKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRVGI2TAOBYGE. You are receiving this because you commented.Message ID: @.***>
is misschien handiger ja!
I'm adding "CANbus IO Expander – Mini" to the rear of my (fwd)car, only thing that i'm missing is frequency measurement for a (rear)wheel speed sensor. using a MAX9924 to convert the AC VR signal.
by any chance possible?