Closed Marvicek closed 1 year ago
Accounting funguje: "host-name": "CoreELEC", "tx-rx-attr": "Mbps", "wan-tx": 0.01, "wan-rx": 2.14, Mas nastavene Mbps, takze mensi traffic nezobrazi. Skus zmenit na Kbps pokial potrebujes viac detailov.
Ano, funguje, ale jenom internetový traffic. Ne interní ... Když dám kopírovat 12 giga filmu z NASKY na stolní pc, tak mi to kopírování v grafech neukáže. I když to kopíruje par minut na 113 MB/s. Taffic televize ze satip tunerů a jednotlivýma klientama také vidět není. Nastavení mikrotiku špatně? že ho to nezobrazuje .. jen do internetu. Když nasku nstavuji přes webové rozhraní a instaluji třeba zasuvný modul tak se internetový traffic zobrazí oka... ale ne lokalní .
Nastavenie vyzera v poriadku. Pozri home assistant log ci tam nieje varovanie alebo chyba z accountingu.
Jde ten lokalni taffic z NASu na PC vubec pres MTik? Pochopil jsem to tak, ze jsou obe zarizeni pripojena do TPlink switche. Mikrotik nemuze merit to, o cem ani nevi.
Zdravím Interní traffic probíhá přes switch. Ale mikrotik dělá dhcp klienta, tak by měl mít přehled o přenesených datech? Nebo ne?
Pro vnitrni sit je MTik asi spis DHCP server, ne? DHCP slouzi jen pro prideleni sitove konfigurace (IP adresa, default gateway, DNS apod.). Kdyz se nekdo pripoji do site a chce adresu, pozada o ni broadcastem a DHCP server mu nejakou prideli (na urcitou dobu, treba 1 den). Potom uz nekomunikuji, dokud tato doba nevyprsi -- pak je potreba pozadat o prodlouzeni.
pokial data ako take nejdu cez mikrotik, nema o nich ako vediet.
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs.
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs.
This issue was closed because it has been stalled for 5 days with no activity.
Hello Team Today i try analyze my network traffic. I have problem with client traffic in my network. In grafs only working wan tx and rx. This mean only internet traffic.
My network schema: ISP optical source to MikroTik hEX S. From MikroTik on port one is traffic connected to the switch Tplink 48 ports. From switch is connected tp link deco mesh system for wifi. Also all wire client are connected to the switch. Here are also connected SAT ip tunners and DVBT2 ip tunners.
Problem description: On all graphs i see internet traffic - this is ok But missing internal traffic. For example: My nas and my work pc - here i try transfer data from nas to the pc - not in graf, also data from pc to nas are also not visible. I have in my network TVheadend for distribution of the signal. SAT-ip tuners, DVBT2 tunnes also generate traffic to the TVheadend mashine and also traffic between tvheadend and client. - this is also not visible.
Is mystake on setting of the plugin? https://webshare.cz/#/file/Lm0c6pAwNS/setting-png
Is mystake on mikrotik setting? https://webshare.cz/#/file/xvIMg9hdbJ/4-png https://webshare.cz/#/file/Mz0Uuks3Rm/1-png https://webshare.cz/#/file/uLDa3YVVJm/2-png https://webshare.cz/#/file/CVyY4A342W/3-png
Here is also log from plugin: https://webshare.cz/#/file/gafExngys7/config-entry-mikrotik-router-7067e31fe3fcc5a4b302dd5135931d1d-json-txt
Grafana: https://webshare.cz/#/file/muwHqmAd4B/wire-png https://webshare.cz/#/file/NyAsFtP9Ne/mikr-status-png https://webshare.cz/#/file/0Ask5QB5wb/wifi-png
Thanks for help and sorry for my bad english.
Martin