Unable to get FIX data from my receiver

[nuninu98TW]

Hi, I'm on my personal project and want to use my c099 f9p module as a rover. I tried running rtktcv using the conf file below, but it showed me the float data the most, and rarely fix data.

console-passwd     =admin
console-timetype   =tow        # (0:gpst,1:utc,2:jst,3:tow)
console-soltype    =dms        # (0:dms,1:deg,2:xyz,3:enu,4:pyl)
console-solflag    =1          # (0:off,1:std+2:age/ratio/ns)
inpstr1-type       =serial     # (0:off,1:serial,2:file,3:tcpsvr,4:tcpcli,7:ntripcli,8:ftp,9:http)
inpstr2-type       =ntripcli   # (0:off,1:serial,2:file,3:tcpsvr,4:tcpcli,7:ntripcli,8:ftp,9:http)
inpstr3-type       =off        # (0:off,1:serial,2:file,3:tcpsvr,4:tcpcli,7:ntripcli,8:ftp,9:http)
inpstr1-path       =ttyACM0:230400:8:n:1:off
inpstr2-path       =nmpnt:nmpnt@ntrip.ndgps.go.kr:2101/DAEZ_RTCM30
inpstr3-path       =
inpstr1-format     =ubx      #(0:rtcm2,1:rtcm3,2:oem4,3:oem3,4:ubx,5:ss2,6:hemis,7:skytraq,8:gw10,9:javad,10:nvs,11:binex,12:rt17,13:sbf,14:cmr,15:tersus,18:sp3)
inpstr2-format     =rtcm3        # (0:rtcm2,1:rtcm3,2:oem4,3:oem3,4:ubx,5:ss2,6:hemis,7:skytraq,8:gw10,9:javad,10:nvs,11:binex,12:rt17,13:sbf,14:cmr,15:tersus,18:sp3)
inpstr3-format     =ubx        # (0:rtcm2,1:rtcm3,2:oem4,3:oem3,4:ubx,5:ss2,6:hemis,7:skytraq,8:gw10,9:javad,10:nvs,11:binex,12:rt17,13:sbf,14:cmr,15:tersus,18:sp3)
inpstr2-nmeareq    =off        # (0:off,1:latlon,2:single)
inpstr2-nmealat    =0          # (deg)
inpstr2-nmealon    =0          # (deg)
inpstr2-nmeahgt    =0          # (m)
outstr1-type       =tcpsvr     # (0:off,1:serial,2:file,3:tcpsvr,4:tcpcli,6:ntripsvr,11:ntripc_c)
outstr2-type       =off        # (0:off,1:serial,2:file,3:tcpsvr,4:tcpcli,6:ntripsvr,11:ntripc_c)
outstr1-path       =localhost:61111
outstr2-path       =../log/%Y%m%d/pos_%Y%m%d%h%M.pos
outstr1-format     =xyz        # (0:llh,1:xyz,2:enu,3:nmea,4:stat)
outstr2-format     =llh        # (0:llh,1:xyz,2:enu,3:nmea,4:stat)
logstr1-type       =off        # (0:off,1:serial,2:file,3:tcpsvr,4:tcpcli,6:ntripsvr,11:ntripc_c)
logstr2-type       =off        # (0:off,1:serial,2:file,3:tcpsvr,4:tcpcli,6:ntripsvr,11:ntripc_c)
logstr3-type       =off        # (0:off,1:serial,2:file,3:tcpsvr,4:tcpcli,6:ntripsvr,11:ntripc_c)
logstr1-path       =../log/%Y%m%d/rov_%Y%m%d%h%M.ubx::T
logstr2-path       =../log/%Y%m%d/base_%Y%m%d%h%M.ubx::T
logstr3-path       =
misc-svrcycle      =10         # (ms)
misc-timeout       =10000      # (ms)
misc-reconnect     =10000      # (ms)
misc-nmeacycle     =5000       # (ms)
misc-buffsize      =32768      # (bytes)
misc-navmsgsel     =all        # (0:all,1:rover,2:base,3:corr)
misc-proxyaddr     =
misc-fswapmargin   =30         # (s)
misc-startcmd      =
misc-stopcmd       =
file-cmdfile1      =
file-cmdfile2      =
file-cmdfile3      =
pos1-posmode       =kinematic     # (0:single,1:dgps,2:kinematic,3:static,4:movingbase,5:fixed,6:ppp-kine,7:ppp-static,8:ppp-fixed)
pos1-frequency     =l1+l2      # (1:l1,2:l1+l2,3:l1+l2+l5,4:l1+l5)
pos1-soltype       =forward    # (0:forward,1:backward,2:combined)
pos1-elmask        =15         # (deg)
pos1-snrmask_r     =on         # (0:off,1:on)
pos1-snrmask_b     =on         # (0:off,1:on)
pos1-snrmask_L1    =35,35,35,35,35,35,35,35,35
pos1-snrmask_L2    =35,35,35,35,35,35,35,35,35
pos1-snrmask_L5    =0,0,0,0,0,0,0,0,0
pos1-dynamics      =on        # (0:off,1:on)
pos1-tidecorr      =off        # (0:off,1:on,2:otl)
pos1-ionoopt       =brdc       # (0:off,1:brdc,2:sbas,3:dual-freq,4:est-stec,5:ionex-tec,6:qzs-brdc,7:qzs-lex,8:stec)
pos1-tropopt       =sbas       # (0:off,1:saas,2:sbas,3:est-ztd,4:est-ztdgrad,5:ztd)
pos1-sateph        =brdc       # (0:brdc,1:precise,2:brdc+sbas,3:brdc+ssrapc,4:brdc+ssrcom)
pos1-posopt1       =on         # (0:off,1:on)
pos1-posopt2       =on         # (0:off,1:on)
pos1-posopt3       =on         # (0:off,1:on,2:precise)
pos1-posopt4       =on         # (0:off,1:on)
pos1-posopt5       =on         # (0:off,1:on)
pos1-posopt6       =off        # (0:off,1:on)
pos1-exclsats      =C02        # (prn ...)
pos1-navsys        =63         # (1:gps+2:sbas+4:glo+8:gal+16:qzs+32:comp)
pos2-armode        =instantaneous # (0:off,1:continuous,2:instantaneous,3:fix-and-hold)
pos2-gloarmode     =off        # (0:off,1:on,2:autocal)
pos2-bdsarmode     =on         # (0:off,1:on)
pos2-arthres       =3
pos2-arthres1      =0.9999
pos2-arthres2      =0.25
pos2-arthres3      =0.1
pos2-arthres4      =0.05
pos2-arlockcnt     =30
pos2-arelmask      =0          # (deg)
pos2-arminfix      =100
pos2-armaxiter     =1
pos2-elmaskhold    =0          # (deg)
pos2-aroutcnt      =30
pos2-maxage        =30         # (s)
pos2-syncsol       =off        # (0:off,1:on)
pos2-slipthres     =0.05       # (m)
pos2-rejionno      =30         # (m)
pos2-rejgdop       =30
pos2-niter         =1
pos2-baselen       =0          # (m)
pos2-basesig       =0          # (m)
out-solformat      =llh        # (0:llh,1:xyz,2:enu,3:nmea)
out-outhead        =on        # (0:off,1:on)
out-outopt         =off        # (0:off,1:on)
out-outvel         =off        # (0:off,1:on)
out-timesys        =gpst       # (0:gpst,1:utc,2:jst)
out-timeform       =tow        # (0:tow,1:hms)
out-timendec       =3
out-degform        =deg        # (0:deg,1:dms)
out-fieldsep       =
out-outsingle      =off         # (0:off,1:on)
out-maxsolstd      =0          # (m)
out-height         =geodetic   # (0:ellipsoidal,1:geodetic)
out-geoid          =internal   # (0:internal,1:egm96,2:egm08_2.5,3:egm08_1,4:gsi2000)
out-solstatic      =all        # (0:all,1:single)
out-nmeaintv1      =0          # (s)
out-nmeaintv2      =0          # (s)
out-outstat        =off        # (0:off,1:state,2:residual)
stats-eratio1      =100
stats-eratio2      =100
stats-errphase     =0.01       # (m)
stats-errphaseel   =0.01       # (m)
stats-errphasebl   =0          # (m/10km)
stats-errdoppler   =10         # (Hz)
stats-stdbias      =30         # (m)
stats-stdiono      =0.03       # (m)
stats-stdtrop      =0.3        # (m)
stats-prnaccelh    =10         # (m/s^2)
stats-prnaccelv    =10         # (m/s^2)
stats-prnbias      =0.0001     # (m)
stats-prniono      =0.001      # (m)
stats-prntrop      =0.0001     # (m)
stats-prnpos       =0          # (m)
stats-clkstab      =5e-12      # (s/s)
ant1-postype       =llh        # (0:llh,1:xyz,2:single,3:posfile,4:rinexhead,5:rtcm,6:raw)
ant1-pos1          =         # (deg|m)
ant1-pos2          =         # (deg|m)
ant1-pos3          =          # (m|m)
ant1-anttype       =
ant1-antdele       =0          # (m)
ant1-antdeln       =0          # (m)
ant1-antdelu       =0          # (m)
ant2-postype       =llh        # (0:llh,1:xyz,2:single,3:posfile,4:rinexhead,5:rtcm,6:raw)
ant2-pos1          =36.36266            # (deg|m)
ant2-pos2          =127.29138          # (deg|m)
ant2-pos3          =134.707           # (m|m)
ant2-anttype       =
ant2-antdele       =0          # (m)
ant2-antdeln       =0          # (m)
ant2-antdelu       =0          # (m)
ant2-maxaveep      =3600
ant2-initrst       =on         # (0:off,1:on)
misc-timeinterp    =off        # (0:off,1:on)
misc-sbasatsel     =0          # (0:all)
misc-rnxopt1       =
misc-rnxopt2       =
misc-pppopt        =
file-satantfile    =
file-rcvantfile    =
file-staposfile    =
file-geoidfile     =
file-ionofile      =
file-dcbfile       =
file-eopfile       =
file-blqfile       =
file-tempdir       =
file-geexefile     =
file-solstatfile   =
file-tracefile     =

I am using base station that provided from Korean government, and my rover uses RXM-RAWX and RXM-SFRBX for output message. I also tried command "st" and I could not find anything wrong. It rarely shows me the fix data, but it's value is same as the single's one. Would you please tell me what am I doing wrong?