search

tompi / cheapino

An affordable split 36 keys keyboard
536 stars 23 forks source link

Waiting for drive to deploy... #11

Closed normausome closed 10 months ago

normausome commented 10 months ago

Hey guys!

I am having an issue with it being stuck at "Waiting for drive to deploy" when I run "make cheapino:default:flash". not sure why this would be happening. I see the rp2040 being listed when I run "lsusb".

Thanks!

tompi commented 10 months ago

Hey!

Did you power on the rp2040 while holding down the boot button?

Or hold boot and press reset

On Fri, 10 Nov 2023 at 22:59, normausome @.***> wrote:

Hey guys!

I am having an issue with it being stuck at "Waiting for drive to deploy" when I run "make cheapino:default:flash". not sure why this would be happening. I see the rp2040 being listed when I run "lsusb".

Thanks!

— Reply to this email directly, view it on GitHub https://github.com/tompi/cheapino/issues/11, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABYSJIH347PJR6KDNRIXXTYD2PTBAVCNFSM6AAAAAA7GX5MCOVHI2DSMVQWIX3LMV43ASLTON2WKOZRHE4DQNBWGU2TANY . You are receiving this because you are subscribed to this thread.Message ID: @.***>

tompi commented 10 months ago

It should show up as a usb drive if you manage to put it in dfu mode

On Fri, 10 Nov 2023 at 23:14, Thomas Haukland @.***> wrote:

Hey!

Did you power on the rp2040 while holding down the boot button?

Or hold boot and press reset

On Fri, 10 Nov 2023 at 22:59, normausome @.***> wrote:

Hey guys!

I am having an issue with it being stuck at "Waiting for drive to deploy" when I run "make cheapino:default:flash". not sure why this would be happening. I see the rp2040 being listed when I run "lsusb".

Thanks!

— Reply to this email directly, view it on GitHub https://github.com/tompi/cheapino/issues/11, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABYSJIH347PJR6KDNRIXXTYD2PTBAVCNFSM6AAAAAA7GX5MCOVHI2DSMVQWIX3LMV43ASLTON2WKOZRHE4DQNBWGU2TANY . You are receiving this because you are subscribed to this thread.Message ID: @.***>

normausome commented 10 months ago

Hey! so just got it working. flashed it on my mac instead of ubuntu. so i ran "make cheapino:default:flash" and it wrote to the MCU, but now it doesn't type. i see the LED indicator on though!

SCR-20231110-pmkt

^^ attaching screenshot showing a successful flash!

normausome commented 10 months ago

would i have to flash it with the RJ45 plugged in? could also be my soldering that is messed up

tompi commented 10 months ago

No, shouldnt have to do that…

So no keys Are working?

Did you test the miryoku uf2 file?

If neither Are working, maybe post some pics of the board, might be some hw trouble?

On Sat, 11 Nov 2023 at 03:54, normausome @.***> wrote:

would i have to flash it with the RJ45 plugged in?

— Reply to this email directly, view it on GitHub https://github.com/tompi/cheapino/issues/11#issuecomment-1806646217, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABYSJIZ72DLSCDX7N2ZLQDYD3SGNAVCNFSM6AAAAAA7GX5MCOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBWGY2DMMRRG4 . You are receiving this because you commented.Message ID: @.***>

normausome commented 10 months ago

yes, no keys are working. i need to get a multimeter to test the connection to the keys....

tompi commented 10 months ago

Send some good resolution pictures of the board. Might be able to spot problem by visual inspection

On Sat, 11 Nov 2023 at 15:03, normausome @.***> wrote:

yes, no keys are working. i need to get a multimeter to test the connection to the keys....

— Reply to this email directly, view it on GitHub https://github.com/tompi/cheapino/issues/11#issuecomment-1806825430, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABYSJNANBMFMZWELM7ANNTYD6ASRAVCNFSM6AAAAAA7GX5MCOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBWHAZDKNBTGA . You are receiving this because you commented.Message ID: @.***>

normausome commented 10 months ago

got it! so left side works, but right side doesn't - just had to resolder some of the diodes correctly. sorry this is my first time!

time to figure out what is wrong with the right side.

tompi commented 10 months ago

Try another rj45 cable and if it doesnt help, post close ups

On Sat, 11 Nov 2023 at 16:44, normausome @.***> wrote:

got it! so left side works, but right side doesn't - just had to resolder some of the diodes correctly. sorry this is my first time!

time to figure out what is wrong with the right side.

— Reply to this email directly, view it on GitHub https://github.com/tompi/cheapino/issues/11#issuecomment-1806848325, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABYSJMEIEDK2JKXNVAXO4LYD6MORAVCNFSM6AAAAAA7GX5MCOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBWHA2DQMZSGU . You are receiving this because you commented.Message ID: @.***>

normausome commented 10 months ago

ok so what i did was desolder switches and try it out on a new board! thanks for the help!!