search

tomquist / esphome-b2500

11 stars 0 forks source link

fehlende MQTT Items bei Configuration Version 2 #27

Open Gebegern opened 1 week ago

Gebegern commented 1 week ago

Vorab: Klasse Arbeit!! was mir aufgefallen ist: wird der yaml Code mit der Configuration V2 erzeugt, kann ich im MQTT Explorer nur 3 Items im battery Folder sehen. wir der yaml Code mit der Configuration V1 erzeugt erscheinen 5 Items. In der V2 Version fehlen leider die Einträge "remaining_percent" und "remaining_capacity". siehe Screenshot

Steps to reproduce

Expected behavior

Actual behavior

Additional context

Screenshots MQTT Battery V1

Device information

Configuration

{
  "template_version": "v1",
  "name": "akku-b2500",
  "friendly_name": "Akku B2500",
  "poll_interval_seconds": 5,
  "log_level": "INFO",
  "mqtt": {
    "topic": "akku-b2500",
    "broker": "192.168.178.61",
    "port": 1883,
    "username": "mqtt-user",
    "password": "***",
    "discovery": false
  },
  "wifi": {
    "ssid": "Gluecksburg",
    "password": "***"
  },
  "board": "az-delivery-devkit-v4",
  "variant": "auto",
  "flash_size": "4MB",
  "idf_platform_version": "",
  "enable_auto_restart": true,
  "auto_restart": {
    "restart_after_error_count": 8
  },
  "enable_cellquery": false,
  "enable_timer_query": true,
  "enable_cmd30": false,
  "enable_esp_temperature": false,
  "esp_temperature": {
    "variant": "internal"
  },
  "enable_powermeter": false,
  "enable_experimental_commands": false,
  "enable_hexdump": false,
  "enable_set_wifi": false,
  "set_wifi": {
    "ssid": "MyWifi",
    "password": "***"
  },
  "enable_set_mqtt": false,
  "powermeter": {
    "tx_pin": "GPIO6",
    "rx_pin": "GPIO7",
    "baud_rate": 9600,
    "stop_bits": 1
  },
  "enable_enforce_dod": false,
  "enable_powerzero": false,
  "powerzero": {
    "grid_power_topic": "tibber-esp/sensor/power/state",
    "limit_cmd_topic": "openDTU/XXXXXXXXXXXX/cmd/limit_persistent_relative",
    "limit_state_topic": "openDTU/XXXXXXXXXXXX/state/limit_relative"
  },
  "enable_manual_ip": false,
  "manual_ip": {
    "ip": "192.168.1.100",
    "gateway": "192.168.1.1",
    "subnet": "255.255.255.0",
    "dns": "192.168.1.1"
  },
  "enable_web_server": true,
  "web_server": {
    "port": 80,
    "js_include": "./v2/www.js"
  },
  "enable_ota": true,
  "ota": {
    "password": "***",
    "enable_unprotected_writes": false
  },
  "enable_fallback_hotspot": true,
  "fallback_hotspot": {
    "ssid": "Akku-B2500 Fallback Hotspot",
    "enable_captive_portal": true
  },
  "enable_dio_flash_mode": false,
  "storages": [
    {
      "name": "Akku-B2500-1",
      "version": 2,
      "mac_address": "***"
    },
    {
      "name": "Akku-B2500-2",
      "version": 2,
      "mac_address": "***"
    }
  ]
}
ugath commented 1 week ago

Einfach etwas abwarten! Die Werte kommen irgendwann (wahrscheinlich wenn sich im Speicher was ändert). grafik