To improve the map quality in Georgia, we propose to make data improvements by sharing challenges, and when appropriate, fixing data errors, and adding or editing certain kinds of geometry.
How to participate
Anyone is welcome to contribute to this project by participating in our MapRoulette challenges. Here is the extended documentation for using MR. Note that sometimes additional instructions are provided within the challenges.
Challenges
Quality check challenges
Click to expand.
- [Invalid Lane Tag](https://maproulette.org/browse/challenges/23622)
The tag lanes=* on ways with tag highway=* indicates the amount of lanes on the road at hand. The value for the lanes tag should be only one of the following numbers: 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 9, 10. Any other value is incorrect and should be fixed.
- [Not connected highway](https://maproulette.org/browse/challenges/23614)
Ways with tag highway=* must be connected to the rest of the road network to ensure its continuity, e.g. for route planning. When such a way is not connected to another way with tag highway=*, an error is logged.
- [Tag area=yes on object without feature type](https://maproulette.org/browse/challenges/23615)
The area=yes tag is required for some closed ways when used to define a polygon. For closed ways with other tags, there is an assumption that the way defines an area. In some circumstances, a closed way may define both a closed polyline and an area. When tag area=yes is used, it is expected that one of the necessary accompanying tags is also found.
- [Impossible angle in a highway](https://maproulette.org/browse/challenges/23618)
In general, roads intended for vehicles should be built to maintain proper angles which ensure maneuvers and fluent traffic. Extreme, too sharp angles applied to a way may indicate errors in the road geometry.
- [Invalid Turn Restriction](https://maproulette.org/browse/challenges/23620)
This check identifies invalid turn restrictions. Invalid turn restrictions occur in a variety of ways, from invalid members to edge geometry issues to not being routable to wrong topology. Relations, ways and nodes in relations as well as turn restrictions are checked. A relation needs to have exactly one way with role 'from' and exactly one way with role 'to'. These ways should be linked together by at least one way with role 'via' OR with exactly one node with role 'via' (no more and no less).
- [Invalid Mini-Roundabout](https://maproulette.org/browse/challenges/23623)
Mini-roundabouts are a special kind of roundabout with the same rules as other roundabouts, but present as painted circles rather than physical circles. There might also be a low, fully traversable dome or island that vehicles can drive across. Road traffic flows in one direction around a point in the middle, and the traffic in the roundabout has right-of-way. A mini-roundabout is recorded using the tag highway=mini_roundabout.
- [Polygon has self-intersection](https://maproulette.org/browse/challenges/23613)
The necessary edits will be made to fix cases where the tag on a way indicates that the object is a polygon feature, but the way does not meet the definition of a closed way because it is self-intersecting, or ways in a relation with the same role form a self-intersecting polygon
- [This multipolygon is a simple polygon](https://maproulette.org/browse/challenges/23617)
Simple areas are mapped in OSM by creating a closed way and tagging it as an area object rather than a line. Relations of the type multipolygon are used to represent complex areas with holes inside or consisting of multiple disjoint areas. A multipolygon relation can have any number of ways in the role outer (the outline) and any number of ways in the role inner (the holes), and these must form valid rings to build a multipolygon. When a relation of the type multipolygon consists of only one member, which is a simple area, an error is logged.
- [Polygon is not closed](https://maproulette.org/browse/challenges/23612)
Features intended to be a polygon should be correctly tagged. When the tag indicates that the object should be a polygon, but the geometry is built out of a NON-closed way, an error is logged.
Geographical scope
Data improvements will be made across the whole country.
We will follow the Organised Editing Guidelines for this project. TomTom will not make any edits until two weeks after the project announcement. Here is our Organised Editing page, including a list of our editors.
How to find TomTom's edits
All edits made by our team have the hashtag #tt or #tomtom.
Sources for editing
Maxar
Esri
Bing
How to reach out
If you have remarks about a specific edit of ours, please drop a comment in the changeset, and we will do our best to respond thoughtfully. Or, you can also:
ghost
commented
1 year ago
Project description
Goal
To improve the map quality in Georgia, we propose to make data improvements by sharing challenges, and when appropriate, fixing data errors, and adding or editing certain kinds of geometry.
How to participate
Anyone is welcome to contribute to this project by participating in our MapRoulette challenges. Here is the extended documentation for using MR. Note that sometimes additional instructions are provided within the challenges.
Challenges
Quality check challenges
Click to expand.
- [Invalid Lane Tag](https://maproulette.org/browse/challenges/23622) The tag lanes=* on ways with tag highway=* indicates the amount of lanes on the road at hand. The value for the lanes tag should be only one of the following numbers: 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 9, 10. Any other value is incorrect and should be fixed. - [Not connected highway](https://maproulette.org/browse/challenges/23614) Ways with tag highway=* must be connected to the rest of the road network to ensure its continuity, e.g. for route planning. When such a way is not connected to another way with tag highway=*, an error is logged. - [Tag area=yes on object without feature type](https://maproulette.org/browse/challenges/23615) The area=yes tag is required for some closed ways when used to define a polygon. For closed ways with other tags, there is an assumption that the way defines an area. In some circumstances, a closed way may define both a closed polyline and an area. When tag area=yes is used, it is expected that one of the necessary accompanying tags is also found. - [Impossible angle in a highway](https://maproulette.org/browse/challenges/23618) In general, roads intended for vehicles should be built to maintain proper angles which ensure maneuvers and fluent traffic. Extreme, too sharp angles applied to a way may indicate errors in the road geometry. - [Invalid Turn Restriction](https://maproulette.org/browse/challenges/23620) This check identifies invalid turn restrictions. Invalid turn restrictions occur in a variety of ways, from invalid members to edge geometry issues to not being routable to wrong topology. Relations, ways and nodes in relations as well as turn restrictions are checked. A relation needs to have exactly one way with role 'from' and exactly one way with role 'to'. These ways should be linked together by at least one way with role 'via' OR with exactly one node with role 'via' (no more and no less). - [Invalid Mini-Roundabout](https://maproulette.org/browse/challenges/23623) Mini-roundabouts are a special kind of roundabout with the same rules as other roundabouts, but present as painted circles rather than physical circles. There might also be a low, fully traversable dome or island that vehicles can drive across. Road traffic flows in one direction around a point in the middle, and the traffic in the roundabout has right-of-way. A mini-roundabout is recorded using the tag highway=mini_roundabout. - [Polygon has self-intersection](https://maproulette.org/browse/challenges/23613) The necessary edits will be made to fix cases where the tag on a way indicates that the object is a polygon feature, but the way does not meet the definition of a closed way because it is self-intersecting, or ways in a relation with the same role form a self-intersecting polygon - [This multipolygon is a simple polygon](https://maproulette.org/browse/challenges/23617) Simple areas are mapped in OSM by creating a closed way and tagging it as an area object rather than a line. Relations of the type multipolygon are used to represent complex areas with holes inside or consisting of multiple disjoint areas. A multipolygon relation can have any number of ways in the role outer (the outline) and any number of ways in the role inner (the holes), and these must form valid rings to build a multipolygon. When a relation of the type multipolygon consists of only one member, which is a simple area, an error is logged. - [Polygon is not closed](https://maproulette.org/browse/challenges/23612) Features intended to be a polygon should be correctly tagged. When the tag indicates that the object should be a polygon, but the geometry is built out of a NON-closed way, an error is logged.Geographical scope
Data improvements will be made across the whole country.
Announcements
This project was announced in the talk-ge mailing list and the Georgia/Abkhazia/South Ossetia user forum.
TomTom organised editing
We will follow the Organised Editing Guidelines for this project. TomTom will not make any edits until two weeks after the project announcement. Here is our Organised Editing page, including a list of our editors.
How to find TomTom's edits
All edits made by our team have the hashtag #tt or #tomtom.
Sources for editing
How to reach out
If you have remarks about a specific edit of ours, please drop a comment in the changeset, and we will do our best to respond thoughtfully. Or, you can also: