search

tomvandeneede / p2pp

Palette2/3 Post Processing tool for Prusa Slicer
143 stars 39 forks source link

IP or Host not found #152

Closed rnunez24 closed 1 year ago

rnunez24 commented 1 year ago

Using a Palette 3 PRO (accesory mode) klipper cr10 and trying to slice with prusaslicer 2.5.

  1. Trying to export the sliced code and upload via wifi to P3P, host or ip is not found.

p2pp version 8.0.29 Palette version v22.08.11.0

I used advanceipscanner to search the local IP and also the hostname YBA7-P3P.local

  1. Accesory mode .gcode file generate is needed. P2pp only generate .mcfx
tomvandeneede commented 1 year ago

can you ping the palette with this name.

rnunez24 commented 1 year ago

PING IS OK.

Haciendo ping a 192.168.0.42 con 32 bytes de datos: Respuesta desde 192.168.0.42: bytes=32 tiempo=3ms TTL=64 Respuesta desde 192.168.0.42: bytes=32 tiempo=2ms TTL=64 Respuesta desde 192.168.0.42: bytes=32 tiempo=2ms TTL=64 Respuesta desde 192.168.0.42: bytes=32 tiempo=5ms TTL=64 Respuesta desde 192.168.0.42: bytes=32 tiempo=2ms TTL=64 Respuesta desde 192.168.0.42: bytes=32 tiempo=2ms TTL=64 Respuesta desde 192.168.0.42: bytes=32 tiempo=2ms TTL=64 Respuesta desde 192.168.0.42: bytes=32 tiempo=3ms TTL=64 Respuesta desde 192.168.0.42: bytes=32 tiempo=2ms TTL=64

rnunez24 commented 1 year ago

1

P2PP Version: 8.00.49 Python Version: 3.9.1 Platform: win32

Reading File C:\Users\ruben\AppData\Local\Temp.6312.gcode.pp Analyzing Prusa Slicer Configuration All purge lenghths 70/70 OR 140. Purge lengths may not have been set correctly. Linear Ping interval of 350.00mm SPLICE OFFSET: 30.00mm Convert to absolute extrusion parameters Extra filament at end of print 150.00mm Config: Palette3 Accessory Mode Selected GCode Analysis ... Pass 1 Tower detected from (169.282, 157.85600000000002) to (238.218, 181.19199999999998) Automatic Splice length increase activated Gcode Analysis ... Pass 2 Processing time 0.71s Generating GCODE file: (temp location, PS will move) C:\Users\ruben\AppData\Local\Temp.6312.gcode.pp Generating Palette 3 output files Generating PALETTE MAFX file: C:\Users\ruben\Downloads\201901MosaicKeychain1_d0.4_58m_0.20mm_210C_PLA_CR10S.mafx

Print Summary

Number of splices: 5 Number of pings: 8 Total print length 3613.62mm

Inputs/Materials used:

Input 1 2636.69mm - PLA [######] Silver SMART_MATERIALS_PLA_CREALITY Input 2 976.93mm - PLA [######] Black SMART_MATERIALS_PLA_CREALITY

Splice Information:

Splice Offset = 30.00mm Autoloading Offset = 0.00mm 0001 Input: 1 Location: 0.00mm length 133.05mm 0002 Input: 2 Location: 133.05mm length 150.65mm 0003 Input: 1 Location: 283.70mm length 2040.95mm 0004 Input: 2 Location: 2324.65mm length 826.28mm 0005 Input: 1 Location: 3150.93mm length 492.69mm

Ping Information:

Ping 0001 at 423.54mm Ping 0002 at 787.81mm Ping 0003 at 1185.23mm Ping 0004 at 1582.64mm Ping 0005 at 1982.36mm Ping 0006 at 2332.80mm Ping 0007 at 2775.90mm Ping 0008 at 3128.43mm

=========================================================================================== Go to https://github.com/tomvandeneede/p2pp/wiki for more information on P2PP Configuration

Sending file 201901MosaicKeychain1_d0.4_58m_0.20mm_210C_PLA_CR10S.mcfx to P3 (192.168.0.42) Uploading 201901MosaicKeychain1_d0.4_58m_0.20mm_210C_PLA_CR10S.mcfx |██████████████████████████████████████████████████| 31/31Kb [100%] Upload aborted by user

tomvandeneede commented 1 year ago

You have to enable this feature in p3 as well did you do that?

On 24 Jan 2023, at 19:51, rnunez24 @.***> wrote:

https://user-images.githubusercontent.com/48137270/214382299-88432226-0e7a-4023-9cf0-afcba22abeff.JPG P2PP Version: 8.00.49 Python Version: 3.9.1 Platform: win32

Reading File C:\Users\ruben\AppData\Local\Temp.6312.gcode.pp Analyzing Prusa Slicer Configuration All purge lenghths 70/70 OR 140. Purge lengths may not have been set correctly. Linear Ping interval of 350.00mm SPLICE OFFSET: 30.00mm Convert to absolute extrusion parameters Extra filament at end of print 150.00mm Config: Palette3 Accessory Mode Selected GCode Analysis ... Pass 1 Tower detected from (169.282, 157.85600000000002) to (238.218, 181.19199999999998) Automatic Splice length increase activated Gcode Analysis ... Pass 2 Processing time 0.71s Generating GCODE file: (temp location, PS will move) C:\Users\ruben\AppData\Local\Temp.6312.gcode.pp Generating Palette 3 output files Generating PALETTE MAFX file: C:\Users\ruben\Downloads\201901MosaicKeychain1_d0.4_58m_0.20mm_210C_PLA_CR10S.mafx

Print Summary

Number of splices: 5 Number of pings: 8 Total print length 3613.62mm

Inputs/Materials used:

Input 1 2636.69mm - PLA [######] Silver SMART_MATERIALS_PLA_CREALITY Input 2 976.93mm - PLA [######] Black SMART_MATERIALS_PLA_CREALITY

Splice Information:

Splice Offset = 30.00mm Autoloading Offset = 0.00mm 0001 Input: 1 Location: 0.00mm length 133.05mm 0002 Input: 2 Location: 133.05mm length 150.65mm 0003 Input: 1 Location: 283.70mm length 2040.95mm 0004 Input: 2 Location: 2324.65mm length 826.28mm 0005 Input: 1 Location: 3150.93mm length 492.69mm

Ping Information:

Ping 0001 at 423.54mm Ping 0002 at 787.81mm Ping 0003 at 1185.23mm Ping 0004 at 1582.64mm Ping 0005 at 1982.36mm Ping 0006 at 2332.80mm Ping 0007 at 2775.90mm Ping 0008 at 3128.43mm

=========================================================================================== Go to https://github.com/tomvandeneede/p2pp/wiki for more information on P2PP Configuration

Sending file 201901MosaicKeychain1_d0.4_58m_0.20mm_210C_PLA_CR10S.mcfx to P3 (192.168.0.42) Uploading 201901MosaicKeychain1_d0.4_58m_0.20mm_210C_PLA_CR10S.mcfx |██████████████████████████████████████████████████| 31/31Kb [100%] Upload aborted by user

— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/152#issuecomment-1402432532, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJNBPFEMAWKIGCNVWPLWUAQDDANCNFSM6AAAAAAUE2Z4TI. You are receiving this because you commented.

rnunez24 commented 1 year ago

You have to enable this feature in p3 as well did you do that? … On 24 Jan 2023, at 19:51, rnunez24 @.***> wrote: https://user-images.githubusercontent.com/48137270/214382299-88432226-0e7a-4023-9cf0-afcba22abeff.JPG P2PP Version: 8.00.49 Python Version: 3.9.1 Platform: win32 Reading File C:\Users\ruben\AppData\Local\Temp.6312.gcode.pp Analyzing Prusa Slicer Configuration All purge lenghths 70/70 OR 140. Purge lengths may not have been set correctly. Linear Ping interval of 350.00mm SPLICE OFFSET: 30.00mm Convert to absolute extrusion parameters Extra filament at end of print 150.00mm Config: Palette3 Accessory Mode Selected GCode Analysis ... Pass 1 Tower detected from (169.282, 157.85600000000002) to (238.218, 181.19199999999998) Automatic Splice length increase activated Gcode Analysis ... Pass 2 Processing time 0.71s Generating GCODE file: (temp location, PS will move) C:\Users\ruben\AppData\Local\Temp.6312.gcode.pp Generating Palette 3 output files Generating PALETTE MAFX file: C:\Users\ruben\Downloads\201901MosaicKeychain1_d0.4_58m_0.20mm_210C_PLA_CR10S.mafx Print Summary Number of splices: 5 Number of pings: 8 Total print length 3613.62mm Inputs/Materials used: Input 1 2636.69mm - PLA [######] Silver SMART_MATERIALS_PLA_CREALITY Input 2 976.93mm - PLA [######] Black SMART_MATERIALS_PLA_CREALITY Splice Information: Splice Offset = 30.00mm Autoloading Offset = 0.00mm 0001 Input: 1 Location: 0.00mm length 133.05mm 0002 Input: 2 Location: 133.05mm length 150.65mm 0003 Input: 1 Location: 283.70mm length 2040.95mm 0004 Input: 2 Location: 2324.65mm length 826.28mm 0005 Input: 1 Location: 3150.93mm length 492.69mm Ping Information: Ping 0001 at 423.54mm Ping 0002 at 787.81mm Ping 0003 at 1185.23mm Ping 0004 at 1582.64mm Ping 0005 at 1982.36mm Ping 0006 at 2332.80mm Ping 0007 at 2775.90mm Ping 0008 at 3128.43mm =========================================================================================== Go to https://github.com/tomvandeneede/p2pp/wiki for more information on P2PP Configuration Sending file 201901MosaicKeychain1_d0.4_58m_0.20mm_210C_PLA_CR10S.mcfx to P3 (192.168.0.42) Uploading 201901MosaicKeychain1_d0.4_58m_0.20mm_210C_PLA_CR10S.mcfx |██████████████████████████████████████████████████| 31/31Kb [100%] Upload aborted by user — Reply to this email directly, view it on GitHub <#152 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJNBPFEMAWKIGCNVWPLWUAQDDANCNFSM6AAAAAAUE2Z4TI. You are receiving this because you commented

You have to enable this feature in p3 as well did you do that? … On 24 Jan 2023, at 19:51, rnunez24 @.***> wrote: https://user-images.githubusercontent.com/48137270/214382299-88432226-0e7a-4023-9cf0-afcba22abeff.JPG P2PP Version: 8.00.49 Python Version: 3.9.1 Platform: win32 Reading File C:\Users\ruben\AppData\Local\Temp.6312.gcode.pp Analyzing Prusa Slicer Configuration All purge lenghths 70/70 OR 140. Purge lengths may not have been set correctly. Linear Ping interval of 350.00mm SPLICE OFFSET: 30.00mm Convert to absolute extrusion parameters Extra filament at end of print 150.00mm Config: Palette3 Accessory Mode Selected GCode Analysis ... Pass 1 Tower detected from (169.282, 157.85600000000002) to (238.218, 181.19199999999998) Automatic Splice length increase activated Gcode Analysis ... Pass 2 Processing time 0.71s Generating GCODE file: (temp location, PS will move) C:\Users\ruben\AppData\Local\Temp.6312.gcode.pp Generating Palette 3 output files Generating PALETTE MAFX file: C:\Users\ruben\Downloads\201901MosaicKeychain1_d0.4_58m_0.20mm_210C_PLA_CR10S.mafx Print Summary Number of splices: 5 Number of pings: 8 Total print length 3613.62mm Inputs/Materials used: Input 1 2636.69mm - PLA [######] Silver SMART_MATERIALS_PLA_CREALITY Input 2 976.93mm - PLA [######] Black SMART_MATERIALS_PLA_CREALITY Splice Information: Splice Offset = 30.00mm Autoloading Offset = 0.00mm 0001 Input: 1 Location: 0.00mm length 133.05mm 0002 Input: 2 Location: 133.05mm length 150.65mm 0003 Input: 1 Location: 283.70mm length 2040.95mm 0004 Input: 2 Location: 2324.65mm length 826.28mm 0005 Input: 1 Location: 3150.93mm length 492.69mm Ping Information: Ping 0001 at 423.54mm Ping 0002 at 787.81mm Ping 0003 at 1185.23mm Ping 0004 at 1582.64mm Ping 0005 at 1982.36mm Ping 0006 at 2332.80mm Ping 0007 at 2775.90mm Ping 0008 at 3128.43mm =========================================================================================== Go to https://github.com/tomvandeneede/p2pp/wiki for more information on P2PP Configuration Sending file 201901MosaicKeychain1_d0.4_58m_0.20mm_210C_PLA_CR10S.mcfx to P3 (192.168.0.42) Uploading 201901MosaicKeychain1_d0.4_58m_0.20mm_210C_PLA_CR10S.mcfx |██████████████████████████████████████████████████| 31/31Kb [100%] Upload aborted by user — Reply to this email directly, view it on GitHub <#152 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJNBPFEMAWKIGCNVWPLWUAQDDANCNFSM6AAAAAAUE2Z4TI. You are receiving this because you commented.

Sorry Tom, what feature ?

rnunez24 commented 1 year ago

Sorry Tom, What feature is needed to enable?

tomvandeneede commented 1 year ago

https://github.com/tomvandeneede/p2pp/wiki/Uploading-files-to-P3 Uploading files to P3 github.com

On 24 Jan 2023, at 20:15, rnunez24 @.***> wrote:

Sorry Tom, What feature is needed to enable?

— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/152#issuecomment-1402462136, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJNGZYEOIPCBMFB2MVDWUAS6FANCNFSM6AAAAAAUE2Z4TI. You are receiving this because you commented.

rnunez24 commented 1 year ago

ouhggggg.....local file transfer was OFF :(

now is ok! mcfx in p3p. Thx!!

And what about the .gcode? Where is the .gcode file to upload to klipper?

tomvandeneede commented 1 year ago

That should be where you exported it

On 24 Jan 2023, at 20:33, rnunez24 @.***> wrote:

ouhggggg.....local file transfer was OFF :(

now is ok! mcfx in p3p. Thx!!

And what about the .gcode? Where is the .gcode file to upload to klipper?

— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/152#issuecomment-1402484153, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJIH6IQXU4NBH3PRXRDWUAU7VANCNFSM6AAAAAAUE2Z4TI. You are receiving this because you commented.

rnunez24 commented 1 year ago

Configuration reference says:

Output filename format

P2 will use an extension of .mcf.gcode

P3 will use extension of .mcfx

With this P3 configuracion, any gcode is generated to send to the printer in accessory mode. I solved it adding.gcode after .mcfx

eg.

{input_filenamebase}{layerheight}mm{filamenttype[0]}{printermodel}{print_time}.mcfx.gcode

I don't know if this is considered as an issue?