search

tomvandeneede / p2pp

Palette2/3 Post Processing tool for Prusa Slicer
143 stars 39 forks source link

P2PP sending moves out of range, even with new print file. #154

Open Dandydorf opened 1 year ago

Dandydorf commented 1 year ago

Does this sound like a prusaslicer issue, or something to do with the printer itself? I have also had a myriad of random issues such as

The palette put out a goddamn unlimited amount of filament on the print start (still trying to figure this out) and on the same token, the palette unrelatedly undershoots the filament load amounts by more than 5%.

The one print i did get going, ended up failing right before the first splice and couldn't get past an 'unhandled exception' which is apparently uncommon. Should an update of PS or p2 fix ANY of this? It feels so fucking hopeless loading and unloading 3 feet of filament at a time to waste it.

tomvandeneede commented 1 year ago

what version of ps and p2pp are you using. can you send me a screenshot of the error as well as the unprocessed gcode so I can simulate the issueOp 3 mrt. 2023 om 06:35 heeft Dandydorf @.***> het volgende geschreven: Does this sound like a prusaslicer issue, or something to do with the printer itself? I have also had a myriad of random issues such as The palette put out a goddamn unlimited amount of filament on the print start (still trying to figure this out) and on the same token, the palette unrelatedly undershoots the filament load amounts by more than 5%. The one print i did get going, ended up failing right before the first splice and couldn't get past an 'unhandled exception' which is apparently uncommon. Should an update of PS or p2 fix ANY of this? It feels so fucking hopeless loading and unloading 3 feet of filament at a time to waste it.

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.***>

Dandydorf commented 1 year ago

I have gcode but i believe i don't have any unprocessed. I have seen that there is a new version of P2pp out and it may fix a few of these issues

PS VERSION: 2.5 P2PP VERSION: ? GCODE:

tomvandeneede commented 1 year ago

Please try the latest version first then.

Regards

On 3 Mar 2023, at 16:21, Dandydorf @.***> wrote:

I have gcode but i believe i don't have any unprocessed. I have seen that there is a new version of P2pp out and it may fix a few of these issues

— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/154#issuecomment-1453691242, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJIK442HPOZCMJFAKHDW2IEBBANCNFSM6AAAAAAVOFZQFM. You are receiving this because you commented.

Dandydorf commented 1 year ago

Just tried resending the 3d file, will try upgrading the version next