Error in P2PP 9.00.000

[Darkside2016]

We're sorry but an unexpected error occurred while processing your file Please sumbit an issue report on https://github.com/tomvandeneede/p2pp

Error: '

Traceback Info: File "p2pp.py", line 115, in File "C:\Users\tomvandeneede\Documents\p2pp_buildupdate\p2pp\p2pp\mcf.py", line 1043, in p2pp_process_file File "C:\Users\tomvandeneede\Documents\p2pp_buildupdate\p2pp\p2pp\mcf.py", line 838, in parse_gcode_second_pass

[tomvandeneede]

Can you please send me the gcode file for this print

On 5 Mar 2023, at 21:49, Darkside2016 @.***> wrote:

We're sorry but an unexpected error occurred while processing your file Please sumbit an issue report on https://github.com/tomvandeneede/p2pp

Error: '

Traceback Info: File "p2pp.py", line 115, in File "C:\Users\tomvandeneede\Documents\p2pp_buildupdate\p2pp\p2pp\mcf.py", line 1043, in p2pp_process_file File "C:\Users\tomvandeneede\Documents\p2pp_buildupdate\p2pp\p2pp\mcf.py", line 838, in parse_gcode_second_pass

— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/155, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJKJPE4VJYNF246HGRTW2T34ZANCNFSM6AAAAAAVQMBJPQ. You are receiving this because you are subscribed to this thread.

[Darkside2016]

BEAR 3MF 02_2d4h15m_0,20mm_205C_PLA_CR10S.zip Hi, attached is the file that Prusa created.

This error that I have indicated only occurs since version 9.x. I do not have this error in version 8.x of P2PP.

P2PP also cannot complete the process because of the error.

[tomvandeneede]

Can you please also include the unprocessed code

On 6 Mar 2023, at 10:48, Darkside2016 @.***> wrote:

BEAR 3MF 02_2d4h15m_0,20mm_205C_PLA_CR10S.zip https://github.com/tomvandeneede/p2pp/files/10896609/BEAR.3MF.02_2d4h15m_0.20mm_205C_PLA_CR10S.zip Hi, attached is the file that Prusa created.

This error that I have indicated only occurs since version 9.x. I do not have this error in version 8.x of P2PP.

P2PP also cannot complete the process because of the error.

— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/155#issuecomment-1455808784, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJJTM3YDIL7KJBUKTC3W2WXIDANCNFSM6AAAAAAVQMBJPQ. You are receiving this because you commented.

[Darkside2016]

BEAR 3MF 02 Color.zip

This is the finished file with the colours to be used.

[tomvandeneede]

really need the gcode file, 3mf is of no help as it depends on versions etc

On 6 Mar 2023, at 11:08, Darkside2016 @.***> wrote:

BEAR 3MF 02 Color.zip https://github.com/tomvandeneede/p2pp/files/10896786/BEAR.3MF.02.Color.zip This is the finished file with the colours to be used.

— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/155#issuecomment-1455839204, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJJPYUIO7Y4OLQYEJQ3W2WZRPANCNFSM6AAAAAAVQMBJPQ. You are receiving this because you commented.

[Darkside2016]

P2PP cannot finish the file because of the error. The first file I sent is what Prusa saves first and then P2PP opens. After a little while the error appears and P2PP hangs at 78% and does not continue.

Von: Tom Van den Eede @.> Gesendet: Montag, 6. März 2023 11:11 An: tomvandeneede/p2pp @.> Cc: Darkside2016 @.>; Author @.> Betreff: Re: [tomvandeneede/p2pp] Error in P2PP 9.00.000 (Issue #155)

really need the gcode file, 3mf is of no help as it depends on versions etc

On 6 Mar 2023, at 11:08, Darkside2016 @.<mailto:@.>> wrote:

BEAR 3MF 02 Color.zip https://github.com/tomvandeneede/p2pp/files/10896786/BEAR.3MF.02.Color.zip This is the finished file with the colours to be used.

- Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/155#issuecomment-1455839204, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJJPYUIO7Y4OLQYEJQ3W2WZRPANCNFSM6AAAAAAVQMBJPQ. You are receiving this because you commented.

- Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Ftomvandeneede%2Fp2pp%2Fissues%2F155%23issuecomment-1455844189&data=05%7C01%7C%7C975ae0f8ae554ef1d85108db1e2b2025%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638136942788279193%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=%2Fxzs0NJM2rpHSxs586YDZ6bkiH%2B%2FkRlR%2BwyBkZa%2FJlg%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAEOMHZU2BVVFSRVRC6PNDADW2WZ4JANCNFSM6AAAAAAVQMBJPQ&data=05%7C01%7C%7C975ae0f8ae554ef1d85108db1e2b2025%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638136942788279193%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=oOn29K8v08w8d2AUVoAeoVKTglA9VwDVLqxgOhD3SN8%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>

[tomvandeneede]

first file you sent was already processed by P2PP

On 6 Mar 2023, at 11:17, Darkside2016 @.***> wrote:

P2PP cannot finish the file because of the error. The first file I sent is what Prusa saves first and then P2PP opens. After a little while the error appears and P2PP hangs at 78% and does not continue.

Von: Tom Van den Eede @.> Gesendet: Montag, 6. März 2023 11:11 An: tomvandeneede/p2pp @.> Cc: Darkside2016 @.>; Author @.> Betreff: Re: [tomvandeneede/p2pp] Error in P2PP 9.00.000 (Issue #155)

really need the gcode file, 3mf is of no help as it depends on versions etc

On 6 Mar 2023, at 11:08, Darkside2016 @.<mailto:@.>> wrote:

BEAR 3MF 02 Color.zip https://github.com/tomvandeneede/p2pp/files/10896786/BEAR.3MF.02.Color.zip This is the finished file with the colours to be used.

- Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/155#issuecomment-1455839204, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJJPYUIO7Y4OLQYEJQ3W2WZRPANCNFSM6AAAAAAVQMBJPQ. You are receiving this because you commented.

- Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Ftomvandeneede%2Fp2pp%2Fissues%2F155%23issuecomment-1455844189&data=05%7C01%7C%7C975ae0f8ae554ef1d85108db1e2b2025%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638136942788279193%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=%2Fxzs0NJM2rpHSxs586YDZ6bkiH%2B%2FkRlR%2BwyBkZa%2FJlg%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAEOMHZU2BVVFSRVRC6PNDADW2WZ4JANCNFSM6AAAAAAVQMBJPQ&data=05%7C01%7C%7C975ae0f8ae554ef1d85108db1e2b2025%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638136942788279193%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=oOn29K8v08w8d2AUVoAeoVKTglA9VwDVLqxgOhD3SN8%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>> — Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/155#issuecomment-1455854542, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJPTZ2DFX5MZKGLCFYTW2W2THANCNFSM6AAAAAAVQMBJPQ. You are receiving this because you commented.

[Darkside2016]

BEAR 3MF 02_0.16mm_PLA_CR10V2_2d6h42m.zip

I have now taken out everything that concerns P2PP.

However, I would also be happy to send you my custom Gcode.

;P2PP PALETTE3_PRO ;P2PP P3 PROCESSPREHEAT

M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate M204 P500.00 R500.00 T500.00 ;Setup Print/Retract/Travel acceleration M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk M220 S100 ;Reset Feedrate M221 S100 ;Reset FlowrateG90 ; use absolute coordinates

M83 ; extruder relative mode M104 ; set temporary nozzle temp to prevent oozing during homing M140 S{first_layer_bed_temperature[0]} ; set final bed temp G4 S30 ; allow partial nozzle warmup G28 ; home all axis

M420 S1 ;Load automatic mesh G29 L0

M104 S{first_layer_temperature[0]} ; set final nozzle temp M190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize M109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize

G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up

;Put printing message on LCD screen M117 Printing...

;P2PP PRINTERPROFILE=77c19c195bdaccd9098d24740f1c5167

;P2PP SPLICEOFFSET=30 ;P2PP MINSTARTSPLICE=130 ;P2PP MINSPLICE=90

;P2PP EXTRAENDFILAMENT=150

;P2PP LINEARPINGLENGTH=350

;P2PP MATERIAL_DEFAULT_2_0_1 ;P2PP MATERIAL_PLA_PLA_2_0_1 ;P2PP MATERIAL_PLAPLA2-1_0_0 ;P2PP MATERIAL_PLA2_PLA_0_0_0

;P2PP ABSOLUTEEXTRUDER

;P2PP TEMPERATURECONTROL

;P2PP SIDEWIPELOC=X319 ;P2PP SIDEWIPEMINY=45 ;P2PP SIDEWIPEMAXY=45 ;P2PP WIPEFEEDRATE=200 ;P2PP SIDEWIPECORRECTION=1.0 ;P2PP SIDEWIPEZHOP=3.0

;P2PP CHECKVERSION

;P2PP CONSOLEWAIT

;P2PP AUTOADDPURGE

;P2PP P3_PROCESSPREHEAT

;P2PP P3_UPLOADFILE ;P2PP P3_HOSTNAME=FKCP-P3P

;P2PP P3_SHOWPRINTERPAGE

[tomvandeneede]

compiling 9.0.1 as fix for testing

On 6 Mar 2023, at 11:34, Darkside2016 @.***> wrote:

BEAR 3MF 02_0.16mm_PLA_CR10V2_2d6h42m.zip https://github.com/tomvandeneede/p2pp/files/10897095/BEAR.3MF.02_0.16mm_PLA_CR10V2_2d6h42m.zip I have now taken out everything that concerns P2PP.

However, I would also be happy to send you my custom Gcode.

;P2PP PALETTE3_PRO ;P2PP P3 PROCESSPREHEAT

M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate M204 P500.00 R500.00 T500.00 ;Setup Print/Retract/Travel acceleration M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk M220 S100 ;Reset Feedrate M221 S100 ;Reset FlowrateG90 ; use absolute coordinates

M83 ; extruder relative mode M104 ; set temporary nozzle temp to prevent oozing during homing M140 S{first_layer_bed_temperature[0]} ; set final bed temp G4 S30 ; allow partial nozzle warmup G28 ; home all axis

M420 S1 ;Load automatic mesh G29 L0

M104 S{first_layer_temperature[0]} ; set final nozzle temp M190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize M109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize

G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up

;Put printing message on LCD screen M117 Printing...

;P2PP PRINTERPROFILE=77c19c195bdaccd9098d24740f1c5167

;P2PP SPLICEOFFSET=30 ;P2PP MINSTARTSPLICE=130 ;P2PP MINSPLICE=90

;P2PP EXTRAENDFILAMENT=150

;P2PP LINEARPINGLENGTH=350

;P2PP MATERIAL_DEFAULT_2_0_1 ;P2PP MATERIAL_PLA_PLA_2_0_1 ;P2PP MATERIAL_PLAPLA2-1_0_0 ;P2PP MATERIAL_PLA2_PLA_0_0_0

;P2PP ABSOLUTEEXTRUDER

;P2PP TEMPERATURECONTROL

;P2PP SIDEWIPELOC=X319 ;P2PP SIDEWIPEMINY=45 ;P2PP SIDEWIPEMAXY=45 ;P2PP WIPEFEEDRATE=200 ;P2PP SIDEWIPECORRECTION=1.0 ;P2PP SIDEWIPEZHOP=3.0

;P2PP CHECKVERSION

;P2PP CONSOLEWAIT

;P2PP AUTOADDPURGE

;P2PP P3_PROCESSPREHEAT

;P2PP P3_UPLOADFILE ;P2PP P3_HOSTNAME=FKCP-P3P

;P2PP P3_SHOWPRINTERPAGE

— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/155#issuecomment-1455880791, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJJCDMEPGD5K65FOWTDW2W4RTANCNFSM6AAAAAAVQMBJPQ. You are receiving this because you commented.

[bavery79]

Would just like to add to this, since I'm still seeing this same error message with 9.01.04. I suspect it has something to do with a change on the PrusaSlicer side of things, since I'm only seeing the error in the 2.6 release version of PrusaSlicer. PrusaSlicer 2.6.0-rc2 does not trigger this error.

Also, that error message is directly preceded by a "permission denied" error trying to save the mafx file.

---

We're sorry but an unexpected error occurred while processing your file Please sumbit an issue report on https://github.com/tomvandeneede/p2pp

Error: [Errno 13] Permission denied: 'BRYAN - Hammerhead Shark_update.mcf.mafx'

Traceback Info: File "p2pp.py", line 115, in File "C:\Users\tomvandeneede\Documents\p2pp_buildupdate\p2pp\p2pp\mcf.py", line 1137, in p2pp_process_file File "C:\Users\tomvandeneede\AppData\Local\Programs\Python\Python39\lib\zipfile.py", line 1239, in init

[tomvandeneede]

could you try resending the unprocessed fime as I was not able to download is due to access restrictions on the google driveOp 1 aug. 2023 om 00:33 heeft bavery79 @.***> het volgende geschreven: Would just like to add to this, since I'm still seeing this same error message with 9.01.04. I suspect it has something to do with a change on the PrusaSlicer side of things, since I'm only seeing the error in the 2.6 release version of PrusaSlicer. PrusaSlicer 2.6.0-rc2 does not trigger this error.

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>

[bavery79]

Hey, sorry missed this earlier. Shortly after submitting the original GitHub ticket I edited it to replace the original drive link with a file small enough to just attach via GitHub. Were you able to see this? If you're just working through the email notifications from GitHub maybe you never even saw the revised edit.

On Mon, Jul 31, 2023, 9:05 PM Tom Van den Eede @.***> wrote:

could you try resending the unprocessed fime as I was not able to download is due to access restrictions on the google driveOp 1 aug. 2023 om 00:33 heeft bavery79 @.***> het volgende geschreven: Would just like to add to this, since I'm still seeing this same error message with 9.01.04. I suspect it has something to do with a change on the PrusaSlicer side of things, since I'm only seeing the error in the 2.6 release version of PrusaSlicer. PrusaSlicer 2.6.0-rc2 does not trigger this error.

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/155#issuecomment-1659531823, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMOLE5XWWIENMVWQGKY76HLXTB6ATANCNFSM6AAAAAAVQMBJPQ . You are receiving this because you commented.Message ID: @.***>