search

tomvandeneede / p2pp

Palette2/3 Post Processing tool for Prusa Slicer
143 stars 39 forks source link

purge tower first layer height 0,7mm #157

Closed JamesBond0815 closed 5 months ago

JamesBond0815 commented 1 year ago

When printing with P2PP Purgetowerdelta, the first layer is printed at 0.7mm in air. PrusaSLicer 2.6.0-alpha5 / P2PP 9.00.01 / Caribou MK3S 220 / Palette 3Pro

201901MosaicKeychain1_0.2mm_GelbPLAREDLINE_Caribou_MK3S_220_42m.mcfx.zip 8992.zip Caribou 220 Gelb.zip

tomvandeneede commented 1 year ago

which version of p2pp are you using?Op 25 mrt. 2023 om 16:53 heeft JamesBond0815 @.***> het volgende geschreven: When printing with P2PP Purgetowerdelta, the first layer is printed at 0.7mm in air. PrusaSLicer 2.6.0-alpha5 / P2PP 9.00.01 / Caribou MK3S 220 / Palette 3Pro 201901MosaicKeychain1_0.2mm_GelbPLAREDLINE_Caribou_MK3S_220_42m.mcfx.zip [8992.zip](https://github.com/to

mvandeneede/p2pp/files/11069302/8992.zip) Caribou 220 Gelb.zip

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.***>

tomvandeneede commented 1 year ago

Can you send me the unprocessed gcode please so I can try to figure out what goes wrong.

On 25 Mar 2023, at 16:53, JamesBond0815 @.***> wrote:

When printing with P2PP Purgetowerdelta, the first layer is printed at 0.7mm in air. PrusaSLicer 2.6.0-alpha5 / P2PP 9.00.01 / Caribou MK3S 220 / Palette 3Pro

201901MosaicKeychain1_0.2mm_GelbPLAREDLINE_Caribou_MK3S_220_42m.mcfx.zip https://github.com/tomvandeneede/p2pp/files/11069301/201901MosaicKeychain1_0.2mm_GelbPLAREDLINE_Caribou_MK3S_220_42m.mcfx.zip 8992.zip Caribou 220 Gelb.zip https://github.com/tomvandeneede/p2pp/files/11069316/Caribou.220.Gelb.zip — Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/157, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJNDDBDITC6WRQ6MW4DW54IGRANCNFSM6AAAAAAWHTIMYI. You are receiving this because you are subscribed to this thread.

JamesBond0815 commented 1 year ago

8992.zip P2PP Version: 9.00.01 PrusaSlicer: 2.6.0 Apha 5 Caribou MKS3S 220

JamesBond0815 commented 1 year ago

P2PP Version: 9.00.01 PrusaSlicer: 2.6.0 Apha 5 Caribou MKS3S 220

Von: Tom Van den Eede @.> Gesendet: Sonntag, 26. März 2023 09:58 An: tomvandeneede/p2pp @.> Cc: JamesBond0815 @.>; Author @.> Betreff: Re: [tomvandeneede/p2pp] purge tower first layer height 0,7mm (Issue #157)

Can you send me the unprocessed gcode please so I can try to figure out what goes wrong.

On 25 Mar 2023, at 16:53, JamesBond0815 @.***> wrote:

When printing with P2PP Purgetowerdelta, the first layer is printed at 0.7mm in air. PrusaSLicer 2.6.0-alpha5 / P2PP 9.00.01 / Caribou MK3S 220 / Palette 3Pro

201901MosaicKeychain1_0.2mm_GelbPLAREDLINE_Caribou_MK3S_220_42m.mcfx.zip https://github.com/tomvandeneede/p2pp/files/11069301/201901MosaicKeychain1_0.2mm_GelbPLAREDLINE_Caribou_MK3S_220_42m.mcfx.zip 8992.zip Caribou 220 Gelb.zip https://github.com/tomvandeneede/p2pp/files/11069316/Caribou.220.Gelb.zip — Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/157, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJNDDBDITC6WRQ6MW4DW54IGRANCNFSM6AAAAAAWHTIMYI. You are receiving this because you are subscribed to this thread.

— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/157#issuecomment-1484024112 , or unsubscribe https://github.com/notifications/unsubscribe-auth/A6PY5CXN5MFFAIOJ7QLODC3W57ZJ5ANCNFSM6AAAAAAWHTIMYI . You are receiving this because you authored the thread.Message ID: @.***>

tomvandeneede commented 1 year ago

can you please check 9.0.2

tomvandeneede commented 5 months ago

closed after no feedback received ... assuming issue solved