Open gbrmatt opened 1 year ago
can you please leave all extruder ids to the default settings in klipper. Klipper named extruder supper has given me headaches before 🫤Op 25 apr. 2023 om 19:51 heeft gbrmatt @.***> het volgende geschreven: I get this error and the print stops, but the printer stays "active" and hot. The value 'extruder1' is not valid for EXTRUDER test mos.gcode.txt I have a feeling this is a klipper related error as it used to work fine and I've not changed anything p2pp related but I'm no expert so I thought I'd get your opinion. its just printing the simple mosaic test key chain and this happens just before the layer change, not the colour change, that goes fine.
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.***>
thanks for the reply, where is the extruder ID found? i cant see it in any config file.
do you have
;P2PP KLIPPER_TOOLCHANGE
in your startup code?
On 26 Apr 2023, at 10:13, gbrmatt @.***> wrote:
thanks for the reply, where is the extruder ID found? i cant see it in any config file.
— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/160#issuecomment-1522976591, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJMO4W4X5LFUAQFVOC3XDDKJZANCNFSM6AAAAAAXLKYJ7Q. You are receiving this because you commented.
Yes, I do.
On Wed, 26 Apr 2023, 12:09 Tom Van den Eede, @.***> wrote:
do you have
;P2PP KLIPPER_TOOLCHANGE
in your startup code?
On 26 Apr 2023, at 10:13, gbrmatt @.***> wrote:
thanks for the reply, where is the extruder ID found? i cant see it in any config file.
— Reply to this email directly, view it on GitHub < https://github.com/tomvandeneede/p2pp/issues/160#issuecomment-1522976591>, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AK6CHJMO4W4X5LFUAQFVOC3XDDKJZANCNFSM6AAAAAAXLKYJ7Q . You are receiving this because you commented.
— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/160#issuecomment-1523237194, or unsubscribe https://github.com/notifications/unsubscribe-auth/A6BCJDO63D3TGPP7BUW4JNTXDD645ANCNFSM6AAAAAAXLKYJ7Q . You are receiving this because you authored the thread.Message ID: @.***>
does not look like this is an issue with P2PP
On 26 Apr 2023, at 13:33, gbrmatt @.***> wrote:
Yes, I do.
On Wed, 26 Apr 2023, 12:09 Tom Van den Eede, @.***> wrote:
do you have
;P2PP KLIPPER_TOOLCHANGE
in your startup code?
On 26 Apr 2023, at 10:13, gbrmatt @.***> wrote:
thanks for the reply, where is the extruder ID found? i cant see it in any config file.
— Reply to this email directly, view it on GitHub < https://github.com/tomvandeneede/p2pp/issues/160#issuecomment-1522976591>, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AK6CHJMO4W4X5LFUAQFVOC3XDDKJZANCNFSM6AAAAAAXLKYJ7Q . You are receiving this because you commented.
— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/160#issuecomment-1523237194, or unsubscribe https://github.com/notifications/unsubscribe-auth/A6BCJDO63D3TGPP7BUW4JNTXDD645ANCNFSM6AAAAAAXLKYJ7Q . You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/160#issuecomment-1523265210, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJKTJMMUJIQX5VXVDBTXDEBYLANCNFSM6AAAAAAXLKYJ7Q. You are receiving this because you commented.
I get this error and the print stops, but the printer stays "active" and hot.
The value 'extruder1' is not valid for EXTRUDER
test mos.gcode.txt
I have a feeling this is a klipper related error as it used to work fine and I've not changed anything p2pp related but I'm no expert so I thought I'd get your opinion.
its just printing the simple mosaic test key chain and this happens just before the layer change, not the colour change, that goes fine.