search

tomvandeneede / p2pp

Palette2/3 Post Processing tool for Prusa Slicer
143 stars 40 forks source link

Enhancement Request: add to Splice Info #168

Open dondec123 opened 1 year ago

dondec123 commented 1 year ago

Hi Tom, I'm in touch with the Mosaic Support, and it would be very helpful if P2PP would print the current Z Height and Layer number next to each entry in the Splice Information Table (if that's available in the software).

Thanks for your consideration.

Don
tomvandeneede commented 1 year ago

Hey don,

That’s going to be tricky… splices and code don’t really align physically.
I can tell the z-height at which a splice happens in the print but this will be the total buffer length + tube length BEFORE it actually prints that filament

So not really sure what you are after

On 29 Jun 2023, at 22:21, dondec123 @.***> wrote:

Hi Tom, I'm in touch with the Mosaic Support, and it would be very helpful if P2PP would print the current Z Height and Layer number next to each entry in the Splice Information Table (if that's available in the software).

Thanks for your consideration.

Don — Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/168, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJJTGUCCSJD46ZF6SBLXNXPTJANCNFSM6AAAAAAZY7HXY4. You are receiving this because you are subscribed to this thread.

dondec123 commented 1 year ago

I see. Haha... wow, nothing's easy here. I get it. Ok, just trying to make it less mystifying for debugging purposes. Thx for the fast think on this :)