search

tomvandeneede / p2pp

Palette2/3 Post Processing tool for Prusa Slicer
143 stars 40 forks source link

P2PP Support for PrusaSlicer on Linux #177

Open N3rdB01-1 opened 10 months ago

N3rdB01-1 commented 10 months ago

I notice that there is not a support direct for linux. Is there one in the works? I tried to build from source but seems to not like something about my setup.

tomvandeneede commented 10 months ago

Should work I guess…. I use one of the standard packaging techniques, it is a matter of creating the config and compile. I know other people are running on linux from the source tree, but you need to make sure you get all the prerequisites right.

What error are you getting?

On 9 Dec 2023, at 22:08, N3rdB01 @.***> wrote:

I notice that there is not a support direct for linux. Is there one in the works? I tried to build from source but seems to not like something about my setup.

— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/177, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJN6OEQRQT3DVKDUYLTYITHLRAVCNFSM6AAAAABAOBLCB6VHI2DSMVQWIX3LMV43ASLTON2WKOZSGAZTIMBVGI2TAMA. You are receiving this because you are subscribed to this thread.

N3rdB01-1 commented 9 months ago

There were several missing dependencies. It still doesn't seem like something is correct. I don't know of I am supposed to see an option in prusaslicer or not. I can't find the multi material usage button ( that is related to prusaslicer I am aware) nor do I see an option to post process the file with p2pp.

Get Outlook for Androidhttps://aka.ms/AAb9ysg

From: Tom Van den Eede @.> Sent: Saturday, December 9, 2023 4:11:58 PM To: tomvandeneede/p2pp @.> Cc: N3rdB01 @.>; Author @.> Subject: Re: [tomvandeneede/p2pp] P2PP Support for PrusaSlicer on Linux (Issue #177)

Should work I guess…. I use one of the standard packaging techniques, it is a matter of creating the config and compile. I know other people are running on linux from the source tree, but you need to make sure you get all the prerequisites right.

What error are you getting?

On 9 Dec 2023, at 22:08, N3rdB01 @.***> wrote:

I notice that there is not a support direct for linux. Is there one in the works? I tried to build from source but seems to not like something about my setup.

— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/177, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJN6OEQRQT3DVKDUYLTYITHLRAVCNFSM6AAAAABAOBLCB6VHI2DSMVQWIX3LMV43ASLTON2WKOZSGAZTIMBVGI2TAMA. You are receiving this because you are subscribed to this thread.

— Reply to this email directly, view it on GitHubhttps://github.com/tomvandeneede/p2pp/issues/177#issuecomment-1848684540, or unsubscribehttps://github.com/notifications/unsubscribe-auth/APK4PK7XDXMFIY7DMXYUNO3YITHZ5AVCNFSM6AAAAABAOBLCB6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNBYGY4DINJUGA. You are receiving this because you authored the thread.Message ID: @.***>

matiasdj87 commented 8 months ago

Use with WINE in terminal.. wine p2pp.exe GCODEfile.gcode