Open Fatihhamircu opened 7 months ago
When using variable layers, turn off the FULLPURGEREDUCTION. They are incompatible since the FULLPURGEREDUCTION layers are calculated on a fixed layer height… they will likely not be in sync with the print and potentially cause collisions.
On 18 Dec 2023, at 13:36, Fatihhamircu @.***> wrote:
Dear all,
I also printed different products on the palette 3 pro and it works. And now, I downloaded and installed p2pp to use the features of Prusa slicer.
I have two different colored objects in Scene. These are molar tooth and nerve inside of it. After the slice, I take the warning below.
Variable layers may cause issues with FULLPURGE / TOWER DELTA This warning could be caused by support that will print on variable layer offsets What had I better do?
Thanks in advance
Best Regards
NOTE: My Setting:
G21 ; metric values G90 ; absolute positioning M82 ; set extruder to absolute mode ;P2PP PALETTE3_PRO ;P2PP PALETTE3_PRO ;P2PP PRINTERPROFILE=12345678901234567890123456789012
;P2PP SPLICEOFFSET=40
;P2PP MINSTARTSPLICE=130 ;P2PP MINSPLICE=90
;P2PP EXTRAENDFILAMENT=150 ;P2PP LINEARPINGLENGTH=350
;P2PP MATERIAL_DEFAULT_0_0_0 ;P2PP MATERIAL_PLA_PLA_2_1_2
;P2PP ABSOLUTEEXTRUDER
;P2PP FULLPURGEREDUCTION ;P2PP WIPEFEEDRATE=3000 ;P2PP AUTOADDPURGE What I got from compiler:
P2PP Version: 9.01.05 Python Version: 3.9.1 Platform: win32
Reading File C:\Users\USER\AppData\Local\Temp.12740.gcode.pp Analyzing Prusa Slicer Configuration All purge lenghths 70/70 OR 140. Purge lengths may not have been set correctly. SPLICE OFFSET: 40.00mm Extra filament at end of print 150.00mm Linear Ping interval of 350.00mm Convert to absolute extrusion parameters Full purge reduction configured GCode Analysis ... Pass 1 Tower detected from (7.537999999999999, 43.852) to (57.294000000000004, 72.888) Variable layers may cause issues with FULLPURGE / TOWER DELTA This warning could be caused by support that will print on variable layer offsets FULLPURGEREDUCTION activated Automatic Splice length increase activated Gcode Analysis ... Pass 2 Processing time 4.45s Generating MCFX file: C:\Users\USER\AppData\Local\Temp.12740.gcode.pp Generating Palette 3 output files — Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/180, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJNOOFF5URCBRGBQPXTYKA2DVAVCNFSM6AAAAABAZOQPKKVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA2DMNJXGU3DCMY. You are receiving this because you are subscribed to this thread.
When using variable layers, turn off the FULLPURGEREDUCTION. They are incompatible since the FULLPURGEREDUCTION layers are calculated on a fixed layer height… they will likely not be in sync with the print and potentially cause collisions.
how to close variable layers?
Dear all,
I also printed different products on the palette 3 pro and it works. And now, I downloaded and installed p2pp to use the features of Prusa slicer.
I have two different colored objects in Scene. These are molar tooth and nerve inside of it. After the slice, I take the warning below.
What had I better do?
Thanks in advance
Best Regards
NOTE: My Setting:
What I got from compiler: