Printing two objects

[Fatihhamircu]

I have molar tooth and nerves of it. I have extracted them from Cone Beam Tomography and other softwares.

I have scaled up these objects. I have intented to print out tooth as transparent and nerve as red with pla. I have used lightening infill with %15 to hold the nerve in the air(seems to be in the air).

What I got from printer is;

My question is: Why the molar tooth and infill is colored even if I selected the extruder 1 which is transparent PLA for molar tooth?

Note; I have palette pro 3 and anycubic 4max pro 2 as hardware and p2pp and prusaslicer as software.

[tomvandeneede]

This is weird

Could you send me the unprocessed gcode Which version of Prusa Slicer are you using?

regards Tom

On 25 Dec 2023, at 18:10, Fatihhamircu @.***> wrote:

I have molar tooth and nerves of it. I have extracted them from Cone Beam Tomography and other softwares. Ekran.goruntusu.2023-11-22.144311.png (view on web) https://github.com/tomvandeneede/p2pp/assets/99354905/269bd8cd-a4a2-4f90-9e45-3e7390589535 Ekran.goruntusu.2023-11-22.144332.png (view on web) https://github.com/tomvandeneede/p2pp/assets/99354905/485140a3-64df-422a-be77-efd9c9d0404f I have scaled up these objects. I have intented to print out tooth as transparent and nerve as red with pla. I have used lightening infill with %15 to hold the nerve in the air(seems to be in the air).

My Gcode is; `G21 ; metric values G90 ; absolute positioning M82 ; set extruder to absolute mode ;P2PP PALETTE3_PRO ;P2PP PALETTE3_PRO ;P2PP PRINTERPROFILE=12345678901234567890123456789012

;P2PP SPLICEOFFSET=40

;P2PP MINSTARTSPLICE=130 ;P2PP MINSPLICE=90

;P2PP EXTRAENDFILAMENT=150 ;P2PP LINEARPINGLENGTH=350

;P2PP MATERIAL_DEFAULT_1_2_1 ;P2PP MATERIAL_PLA_PLA_2_1_2

;P2PP ABSOLUTEEXTRUDER

;P2PP SIDEWIPELOC=X254 ;P2PP SIDEWIPEMINY=45 ;P2PP SIDEWIPEMAXY=195 ;P2PP SIDEWIPECORRECTION=1.0

;set !P2PP SIDEWIPELOC=X254 ;set !P2PP SIDEWIPEMINY=45 ;set SIDEWIPEMAXY to the same value as SIDEWIPEMINY ;set !P2PP SIDEWIPEMAXY=45 ;set WIPEFEEDRATE is required to override default value!! ;set !P2PP WIPEFEEDRATE=200

;P2PP PURGETOWERDELTA=0

;P2PP FULLPURGEREDUCTION ;P2PP WIPEFEEDRATE=3000 ;P2PP AUTOADDPURGE

M140 S[first_layer_bed_temperature] ; set bed temp G28 X0 Y0 ; home X and Y G28 Z0 ; home Z G1 Z30 F{machine_max_feedrate_z[0]60} ; move Z a bit down to not blow on the bed edge while heating G1 X10 F3900 ; let some space on x to prevent the filament cooling exhaust from beeing blocked by the servo motor M190 S[first_layer_bed_temperature] ; wait for bed temp M104 S[first_layer_temperature] ; set extruder temp M106 S80 ; turn on fan to prevent air nozzle melt while heating up M109 S[first_layer_temperature] ; wait for extruder temp M107 ; start with the fan off G28 X0 ; goto X home again G92 E0 ; zero the extruded length G1 Z0.2 F360 ; move plattform upwards ; extrude material next to the plattform (comment or remove following lines to disable) G1 F180 E20 ; extrude some material next to the plattform G92 E0 ; zero the extruded length G1 E-[retract_length] F{retract_speed[0]60} ; do a filament retract G92 E0 ; zero the extruded length again G1 X5 F3900 ; move sideways to get rid of that string G1 E[retract_length] F{retract_speed[0]60} ; do a filament deretract with retract parameters G92 E0 ; zero the extruded length again ; draw intro line (comment or remove following lines to disable) G1 X30 E5 F700 ; draw intro line G92 E0 ; zero the extruded length G1 E-[retract_length] F{retract_speed[0]60} ; do a filament retract G1 X40 Z2.0 ; move away from the introline G92 E0 ; zero the extruded length again G1 E[retract_length] F{retract_speed[0]*60} ; do a filament deretract with retract parameters ; end of intro line code M117 Printing... G5`

When I have run the prusa slicer with p2pp, I got the below preview of 3d print: 85f07d6f-ekran-goruntusu-2023-12-22-201710-600x500.png (view on web) https://github.com/tomvandeneede/p2pp/assets/99354905/bff43f42-bb58-4753-82c1-267afc653dab What I got from printer is; 3b27f45c-5c29-43a0-9983-af41a6aedf61-600x500.jpg (view on web) https://github.com/tomvandeneede/p2pp/assets/99354905/59a7a129-3c49-4d6b-8eeb-f0ba61249911 58a0f608-e7ef-4299-839d-ebfbc432e5b6-600x500.jpg (view on web) https://github.com/tomvandeneede/p2pp/assets/99354905/2202fa21-32d2-4508-b7c2-a183f318bb4c My question is: Why the molar tooth and infill is colored even if I selected the extruder 1 which is transparent PLA for molar tooth?

Note; I have palette pro 3 and anycubic 4max pro 2 as hardware and p2pp and prusaslicer as software.

— Reply to this email directly, view it on GitHub https://github.com/tomvandeneede/p2pp/issues/182, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK6CHJNVEPLSD4HDI677C5DYLGXRVAVCNFSM6AAAAABBCP2LACVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA2TKNZYHA2DMNQ. You are receiving this because you are subscribed to this thread.

[tomvandeneede]

Would you mind attaching the full unprocessed code?

On 25 Dec 2023, at 18:34, Fatihhamircu @.***> wrote:

UPDATE: My bundle is: `# generated by PrusaSlicer 2.7.1+win64 on 2023-12-25 at 17:27:15 UTC

[print:0.20mm Quality @4max https://github.com/4max Pro 2.0 - printSetting - mosaic palette] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = concentric bottom_solid_layers = 4 bottom_solid_min_thickness = 0 bridge_acceleration = 300 bridge_angle = 0 bridge_flow_ratio = 0.65 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 5 compatible_printers = compatible_printers_condition = printer_model=="4MAXPRO20" and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 900 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.2 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 0 external_perimeter_extrusion_width = 0 external_perimeter_speed = 25 external_perimeters_first = 0 extra_perimeters = 0 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.45 fill_angle = 45 fill_density = 15% fill_pattern = lightning first_layer_acceleration = 300 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.65 first_layer_height = 0.2 first_layer_speed = 20 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 1 gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = firmware gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 600 infill_anchor = 400% infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_overlap = 23% infill_speed = 45 inherits = 0.20mm Quality @4max https://github.com/4max Pro 2.0 interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.2 max_print_speed = 50 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}.mcfx overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 500 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_generator = arachne perimeter_speed = 45 perimeters = 3 post_process = "C:\p2pp\p2pp.exe" print_settings_id = raft_contact_distance = 0.1 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 0 skirt_distance = 5 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 20 solid_infill_acceleration = 0 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 solid_infill_speed = 45 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 1 support_material_angle = 0 support_material_auto = 1 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.1 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.4 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 2 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.2 support_material_interface_speed = 30 support_material_pattern = rectilinear-grid support_material_spacing = 2.5 support_material_speed = 45 support_material_style = organic support_material_synchronize_layers = 1 support_material_threshold = 45 support_material_with_sheath = 1 support_material_xy_spacing = 60% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 1 thin_walls = 0 top_fill_pattern = concentric top_infill_extrusion_width = 0.4 top_solid_infill_acceleration = 0 top_solid_infill_speed = 30 top_solid_layers = 5 top_solid_min_thickness = 0 travel_acceleration = 0 travel_speed = 60 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 1 wipe_tower_bridging = 15 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 40 wipe_tower_x = 6.00197 wipe_tower_y = 6.65407 xy_size_compensation = 0

[print:0.20mm Quality @4max https://github.com/4max Pro 2.0 - Copy] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic bottom_solid_layers = 4 bottom_solid_min_thickness = 0 bridge_acceleration = 300 bridge_angle = 0 bridge_flow_ratio = 0.65 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 0 compatible_printers = compatible_printers_condition = printer_model=="4MAXPRO20" and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 900 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.2 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 0 external_perimeter_extrusion_width = 0 external_perimeter_speed = 25 external_perimeters_first = 0 extra_perimeters = 0 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.45 fill_angle = 45 fill_density = 20% fill_pattern = gyroid first_layer_acceleration = 300 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.65 first_layer_height = 0.3 first_layer_speed = 20 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 1 gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 600 infill_anchor = 400% infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_overlap = 23% infill_speed = 45 inherits = 0.20mm Quality @4max https://github.com/4max Pro 2.0 interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.2 max_print_speed = 50 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}{layer_height}mm{filamenttype[0]}{print_time}.gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 500 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_generator = arachne perimeter_speed = 45 perimeters = 3 post_process = "C:\Program! Files\p2pp\p2pp.exe" print_settings_id = raft_contact_distance = 0.1 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 5 skirt_height = 1 skirts = 2 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 20 solid_infill_acceleration = 0 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 solid_infill_speed = 45 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 1 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.4 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 2 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.2 support_material_interface_speed = 30 support_material_pattern = rectilinear-grid support_material_spacing = 2.5 support_material_speed = 45 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 1 support_material_xy_spacing = 60% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 1 thin_walls = 0 top_fill_pattern = monotonic top_infill_extrusion_width = 0.4 top_solid_infill_acceleration = 0 top_solid_infill_speed = 30 top_solid_layers = 5 top_solid_min_thickness = 0 travel_acceleration = 0 travel_speed = 60 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0

[print:Draft @4max https://github.com/4max Pro 2.0] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = alignedrectilinear bottom_solid_layers = 3 bottom_solid_min_thickness = 1.2 bridge_acceleration = 300 bridge_angle = 0 bridge_flow_ratio = 0.9 bridge_speed = 25 brim_separation = 0 brim_type = outer_only brim_width = 4 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 0 draft_shield = disabled elefant_foot_compensation = 0.25 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 0 external_perimeter_extrusion_width = 0 external_perimeter_speed = 100% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.55 fill_angle = 45 fill_density = 20% fill_pattern = gyroid first_layer_acceleration = 300 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.65 first_layer_height = 0.3 first_layer_speed = 15 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 1 gap_fill_speed = 45 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 600 infill_anchor = 400% infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.6 infill_first = 0 infill_overlap = 23% infill_speed = 45 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.3 max_print_speed = 60 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = config v7 from hartrusion.com only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 500 perimeter_extruder = 1 perimeter_extrusion_width = 0.65 perimeter_generator = arachne perimeter_speed = 45 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.1 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 7 skirt_height = 1 skirts = 2 slice_closing_radius = 0.05 slicing_mode = regular small_perimeter_speed = 88.8% solid_infill_acceleration = 0 solid_infill_below_area = 5 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.8 solid_infill_speed = 88.8% spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 1 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.45 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 2 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.2 support_material_interface_speed = 100% support_material_pattern = rectilinear-grid support_material_spacing = 2.5 support_material_speed = 55 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 0 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 1 thin_walls = 1 top_fill_pattern = alignedrectilinear top_infill_extrusion_width = 0 top_solid_infill_acceleration = 0 top_solid_infill_speed = 87.5% top_solid_layers = 3 top_solid_min_thickness = 1.2 travel_acceleration = 0 travel_speed = 75 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0

[print:Factory ABS @4max https://github.com/4max Pro 2.0] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = alignedrectilinear bottom_solid_layers = 6 bottom_solid_min_thickness = 1.2 bridge_acceleration = 500 bridge_angle = 0 bridge_flow_ratio = 0.62 bridge_speed = 50 brim_separation = 0 brim_type = outer_only brim_width = 5 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 0 draft_shield = disabled elefant_foot_compensation = 0.25 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 0 external_perimeter_extrusion_width = 0.4 external_perimeter_speed = 30 external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.4 fill_angle = 45 fill_density = 20% fill_pattern = grid first_layer_acceleration = 1000 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.52 first_layer_height = 0.3 first_layer_speed = 20 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 1 gap_fill_speed = 15 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 1000 infill_anchor = 400% infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.4 infill_first = 0 infill_overlap = 23% infill_speed = 50 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.2 max_print_speed = 50 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = config v7 from hartrusion.com\nfactory settings as suggested from manufacturer in cura profile only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 334 perimeter_extruder = 1 perimeter_extrusion_width = 0.4 perimeter_generator = arachne perimeter_speed = 50 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.1 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 7 skirt_height = 1 skirts = 0 slice_closing_radius = 0.05 slicing_mode = regular small_perimeter_speed = 50 solid_infill_acceleration = 0 solid_infill_below_area = 5 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.4 solid_infill_speed = 50 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 45 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.45 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 2 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.2 support_material_interface_speed = 30 support_material_pattern = rectilinear-grid support_material_spacing = 2.667 support_material_speed = 50 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 60 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 1 thin_walls = 1 top_fill_pattern = alignedrectilinear top_infill_extrusion_width = 0.4 top_solid_infill_acceleration = 0 top_solid_infill_speed = 29 top_solid_layers = 6 top_solid_min_thickness = 1.2 travel_acceleration = 0 travel_speed = 60 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0

[print:Factory PLA,TPU @4max https://github.com/4max Pro 2.0] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = alignedrectilinear bottom_solid_layers = 6 bottom_solid_min_thickness = 1.2 bridge_acceleration = 500 bridge_angle = 0 bridge_flow_ratio = 0.62 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 5 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 0 draft_shield = disabled elefant_foot_compensation = 0.25 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 0 external_perimeter_extrusion_width = 0.4 external_perimeter_speed = 30 external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.4 fill_angle = 45 fill_density = 20% fill_pattern = grid first_layer_acceleration = 1000 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.52 first_layer_height = 0.3 first_layer_speed = 20 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 1 gap_fill_speed = 15 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 1000 infill_anchor = 400% infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.4 infill_first = 0 infill_overlap = 23% infill_speed = 45 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.2 max_print_speed = 50 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = config v7 from hartrusion.com\nfactory settings as suggested from manufacturer in cura profile only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 334 perimeter_extruder = 1 perimeter_extrusion_width = 0.4 perimeter_generator = arachne perimeter_speed = 50 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.1 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 7 skirt_height = 1 skirts = 0 slice_closing_radius = 0.05 slicing_mode = regular small_perimeter_speed = 45 solid_infill_acceleration = 0 solid_infill_below_area = 5 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.4 solid_infill_speed = 45 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 45 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.45 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 2 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.2 support_material_interface_speed = 30 support_material_pattern = rectilinear-grid support_material_spacing = 2.667 support_material_speed = 45 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 60 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 1 thin_walls = 1 top_fill_pattern = alignedrectilinear top_infill_extrusion_width = 0.4 top_solid_infill_acceleration = 0 top_solid_infill_speed = 26 top_solid_layers = 6 top_solid_min_thickness = 1.2 travel_acceleration = 0 travel_speed = 60 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0

[print:Quality @4max https://github.com/4max Pro 2.0] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = alignedrectilinear bottom_solid_layers = 3 bottom_solid_min_thickness = 1.2 bridge_acceleration = 300 bridge_angle = 0 bridge_flow_ratio = 0.62 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 4 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.25 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 0 external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 70% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.4 fill_angle = 45 fill_density = 20% fill_pattern = gyroid first_layer_acceleration = 300 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.65 first_layer_height = 0.26 first_layer_speed = 20 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 1 gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 600 infill_anchor = 400% infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.6 infill_first = 0 infill_overlap = 23% infill_speed = 45 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.2 max_print_speed = 50 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = config v7 from hartrusion.com only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 500 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_generator = arachne perimeter_speed = 50 perimeters = 4 post_process = print_settings_id = raft_contact_distance = 0.1 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 7 skirt_height = 1 skirts = 2 slice_closing_radius = 0.05 slicing_mode = regular small_perimeter_speed = 40% solid_infill_acceleration = 0 solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 solid_infill_speed = 88.8% spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 1 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.45 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 2 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.2 support_material_interface_speed = 30 support_material_pattern = rectilinear-grid support_material_spacing = 2.5 support_material_speed = 45 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 1 thin_walls = 1 top_fill_pattern = alignedrectilinear top_infill_extrusion_width = 0 top_solid_infill_acceleration = 0 top_solid_infill_speed = 65% top_solid_layers = 3 top_solid_min_thickness = 1.2 travel_acceleration = 0 travel_speed = 75 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0

[filament:Anycubic PLA CPL020 White @4max https://github.com/4max Pro 2.0] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 4 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \nG91 ; relative positioning\nG1 E-3 F300 ; retract the filament to release pressure\n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 30 filament_colour = #FFFFFF filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 25 filament_density = 1.156 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 4.5 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "config v7 from hartrusion.com\n195-220 deg C wirtten on spool thingy" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = 2 filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = 0.2 filament_retract_restart_extra_toolchange = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 500 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 60 first_layer_temperature = 210 full_fan_speed_layer = 8 idle_temperature = nil inherits = max_fan_speed = 80 min_fan_speed = 45 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 15 start_filament_gcode = "; Filament gcode\n" temperature = 197

[filament:Anycubic PLA D0163 Grey @4max https://github.com/4max Pro 2.0] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 4 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \nG91 ; relative positioning\nG1 E-3 F300 ; retract the filament to release pressure\n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 30 filament_colour = #808080 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 25 filament_density = 1.156 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "config v7 from hartrusion.com\n190-230 deg C written on box, 200-230 deg C wirtten on spool thingy" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = 2.7 filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = 0.2 filament_retract_restart_extra_toolchange = nil filament_retract_speed = 45 filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 1000 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 60 first_layer_temperature = 215 full_fan_speed_layer = 10 idle_temperature = nil inherits = max_fan_speed = 60 min_fan_speed = 35 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 15 start_filament_gcode = "; Filament gcode\n" temperature = 207

[filament:Factory ABS @4max https://github.com/4max Pro 2.0] bed_temperature = 100 bridge_fan_speed = 0 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 3 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \nG91 ; relative positioning\nG1 E-3 F300 ; retract the filament to release pressure\n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #800000 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 0 filament_density = 0 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "config v7 from hartrusion.com" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 0 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = ABS filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 100 first_layer_temperature = 245 full_fan_speed_layer = 0 idle_temperature = nil inherits = max_fan_speed = 0 min_fan_speed = 0 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 5 start_filament_gcode = "; Filament gcode\n" temperature = 245

[filament:Factory PLA @4max https://github.com/4max Pro 2.0] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 2 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \nG91 ; relative positioning\nG1 E-3 F300 ; retract the filament to release pressure\n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 10 filament_colour = #CCC5BD filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 0 filament_density = 0 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "config v7 from hartrusion.com\nSuggested temps in printer manual: 205 deg C with bed temp 60 deg C " filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = 0 filament_retract_length = 2.5 filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = 30 filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 0 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 60 first_layer_temperature = 205 full_fan_speed_layer = 10 idle_temperature = nil inherits = max_fan_speed = 100 min_fan_speed = 10 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 5 start_filament_gcode = "; Filament gcode\n" temperature = 205

[filament:Factory TPU @4max https://github.com/4max Pro 2.0] bed_temperature = 60 bridge_fan_speed = 0 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 3 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \nG91 ; relative positioning\nG1 E-3 F300 ; retract the filament to release pressure\n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #211AB5 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 0 filament_density = 1.19 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "config v7 from hartrusion.com\nmax4 manual: print head 215, bed 60" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = 0 filament_retract_length = 2.5 filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = 30 filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 0 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 60 first_layer_temperature = 215 full_fan_speed_layer = 0 idle_temperature = nil inherits = max_fan_speed = 0 min_fan_speed = 0 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 5 start_filament_gcode = "; Filament gcode\n" temperature = 215

[filament:FilaFlex 82A @4max https://github.com/4max Pro 2.0] bed_temperature = 30 bridge_fan_speed = 80 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 5 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \n; G91 ; relative positioning\n; G1 E-5 F300 ; retract the filament to release pressure\n;END gcode for filament\n" extrusion_multiplier = 1.113 fan_always_on = 1 fan_below_layer_time = 45 filament_colour = #2B3033 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 69.8 filament_density = 1.12 filament_deretract_speed = 45 filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 1.26 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "config v7 from hartrusion.com\nto avoid oozing, use the avoid crossing perimeters option" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = 1 filament_retract_before_wipe = nil filament_retract_layer_change = 1 filament_retract_length = 8.5 filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = 0.5 filament_retract_restart_extra_toolchange = nil filament_retract_speed = 60 filament_settings_id = "FilaFlex 82A @4max https://github.com/4max Pro 2.0" filament_soluble = 0 filament_spool_weight = 500 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = TPU filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 40 first_layer_temperature = 235 full_fan_speed_layer = 10 idle_temperature = nil inherits = max_fan_speed = 45 min_fan_speed = 25 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 10 start_filament_gcode = "; Filament gcode\n" temperature = 234

[filament:FilaFlex Pro 60A @4max https://github.com/4max Pro 2.0] bed_temperature = 30 bridge_fan_speed = 80 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 2 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \n; G91 ; relative positioning\n; G1 E-5 F300 ; retract the filament to release pressure\n;END gcode for filament\n" extrusion_multiplier = 1.13 fan_always_on = 1 fan_below_layer_time = 45 filament_colour = #31443F filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 99.8 filament_density = 1.12 filament_deretract_speed = 25 filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 1.1 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "config v7 from hartrusion.com\nto avoid oozing, use the avoid crossing perimeters option" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = 1 filament_retract_before_wipe = nil filament_retract_layer_change = 1 filament_retract_length = 8.5 filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = 0.3 filament_retract_restart_extra_toolchange = nil filament_retract_speed = 30 filament_settings_id = "Filaflex 82A @4max https://github.com/4max Pro 2.0" filament_soluble = 0 filament_spool_weight = 500 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = TPU filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 40 first_layer_temperature = 222 full_fan_speed_layer = 4 idle_temperature = nil inherits = max_fan_speed = 50 min_fan_speed = 35 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 10 start_filament_gcode = "; Filament gcode\n" temperature = 218

[filament:Generic PLA @4max https://github.com/4max Pro 2.0 - PLASetting - mosaic palette] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = compatible_printers_condition = printer_model=="4MAXPRO20" compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 4 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode " extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #0080FF filament_cooling_final_speed = 0 filament_cooling_initial_speed = 0 filament_cooling_moves = 0 filament_cost = 0 filament_density = 1.24 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 0 filament_loading_speed_start = 0 filament_max_volumetric_speed = 15 filament_minimal_purge_on_wipe_tower = 0 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "" filament_ramming_parameters = "130 120| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 193 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 0 filament_unloading_speed_start = 0 filament_vendor = Generic filament_wipe = nil first_layer_bed_temperature = 60 first_layer_temperature = 230 full_fan_speed_layer = 8 idle_temperature = 70 inherits = Generic PLA @4max https://github.com/4max Pro 2.0 max_fan_speed = 55 min_fan_speed = 33 min_print_speed = 15 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 8 start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.(MK4IS|XLIS)./}\nM572 S{if nozzle_diameter[0]==0.4}0.038{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp" temperature = 210

[filament:Mvs ABS @4max https://github.com/4max Pro 2.0] bed_temperature = 100 bridge_fan_speed = 0 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 3 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \nG91 ; relative positioning\nG1 E-3 F300 ; retract the filament to release pressure\n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #C6E100 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 24 filament_density = 1.04 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "config v7 from hartrusion.com\nfilament bought from super-filament.de on ebay, probably brand is MVS\nrecommended nozzle: 190 to 230 deg C, bed 80 to 100 deg C" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 1000 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = ABS filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 100 first_layer_temperature = 245 full_fan_speed_layer = 0 idle_temperature = nil inherits = max_fan_speed = 0 min_fan_speed = 0 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 25 start_filament_gcode = "; Filament gcode\n" temperature = 240

[filament:PolyFlex TPU95 @4max https://github.com/4max Pro 2.0] bed_temperature = 45 bridge_fan_speed = 80 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 5 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \nG91 ; relative positioning\nG1 E-5 F300 ; retract the filament to release pressure\n;END gcode for filament\n" extrusion_multiplier = 1.04 fan_always_on = 1 fan_below_layer_time = 45 filament_colour = #FD7D2F filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 67.7 filament_density = 1.22 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 1.65 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "config v7 from hartrusion.com" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = 1 filament_retract_before_wipe = nil filament_retract_layer_change = 1 filament_retract_length = 4 filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = 0.1 filament_retract_restart_extra_toolchange = nil filament_retract_speed = 60 filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 750 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = TPU filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 55 first_layer_temperature = 215 full_fan_speed_layer = 10 idle_temperature = nil inherits = max_fan_speed = 50 min_fan_speed = 25 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 10 start_filament_gcode = "; Filament gcode\n" temperature = 217

[filament:PolyMide CoPA @4max https://github.com/4max Pro 2.0] bed_temperature = 40 bridge_fan_speed = 30 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 3 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \nG91 ; relative positioning\nG1 E-3 F300 ; retract the filament to release pressure\n;M104 S0 ; turn off extruder heating\n;G28 X0 Y0 ; goto x and y home\n;M140 S70 ; set bed temp to 70 degrees to anneal the print for 2 hours inside the printer\n;M117 annealing\n;G4 S54000 ; wait 2 hrs\n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 60 filament_colour = #D6D894 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 92.67 filament_density = 1.12 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 2.4 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "config v7 from hartrusion.com\nto avoid edge curling, increase layer height" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 750 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = NYLON filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 50 first_layer_temperature = 255 full_fan_speed_layer = 6 idle_temperature = nil inherits = max_fan_speed = 25 min_fan_speed = 20 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 40 start_filament_gcode = "; Filament gcode\n" temperature = 253

[filament:filatech HIPS @4max https://github.com/4max Pro 2.0] bed_temperature = 110 bridge_fan_speed = 50 compatible_printers = "Anycubic 4Max Pro 2.0" compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 2 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \nG91 ; relative positioning\nG1 E-3 F300 ; retract the filament to release pressure\n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 45 filament_colour = #EEEEE8 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 25 filament_density = 1.156 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "config v7 from hartrusion.com" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retra

[Fatihhamircu]

So sorry, 3mf file is in the attachment. Hardware:

1. Prusa Slicer 2.7.1
2. Windows 11
3. Anycubic 4max pro2
4. Mosaic Palette Pro 3
5. p2pp latest version

[Uploading molarToothAndNerve.zip…]()

[tomvandeneede]

OK will realle neerd the unprocessed file. Best way of generating that is by temporarely adding the following line to your config and ;P2PP SAVEUNPROCESSED afterwards you will find an unprocessed file in the temp folder. This file is the one I can do some tests on.

Regards

[Fatihhamircu]

[Uploading .10716.zip…]()

I have asked as question whether it is bug or not in the prusa slicer github. https://github.com/prusa3d/PrusaSlicer/issues/11993

Some says that it seems not related to prusa slicer. Is it a bug?

Thanks in advance

Best regards

[tomvandeneede]

I have not been able to download any of your files. they both show as uploading. and you please try resending the unprocessed file so I can take a look?

[Fatihhamircu]

I have not been able to download any of your files. they both show as uploading. and you please try resending the unprocessed file so I can take a look?

.10716.zip

[Fatihhamircu]

I have not been able to download any of your files. they both show as uploading. and you please try resending the unprocessed file so I can take a look?

I have uploeded the file you want. Is it a bug?

[Fatihhamircu]

To be honest, I have asked the same question to the Mosaic palette manufacturer. However, from their responds, I felt they did not developed the software for two object inside each other. Are your post processor software so?

Best regards

[Fatihhamircu]

Have you looked it up the associated files?