(BUG) 4-Speed Fan

[damienemmerson]

Verify the following before opening an trouble issue

Go over all the following points, and put an x in all the boxes that apply. If you're unsure about any of these, don't hesitate to ask. We're here to help!

• [X] That OAuth is Enabled for the SmartApp under the IDE.
• [X] The SmartApp and Device Handler are using the latest code available.
• [X] That Both the SmartApps and Device Handlers have been Published for You in the IDE.

---

About Your Setup

• How many devices are detected?: 23
• Mobile App Version(Not required):
• SmartApp Version: 2.3.3
• Device Handler Version: n/a
• Homebridge Version: 1.3.0
• NodeJS Version: 12.15.0

Expected Behavior

1. When fan is set to high, device command setFanSpeed should have a value of 4.
2. When fan speed is set to low / med /med-high / high, the tile in the home app should report 25% / 50% / 75% / 100% respectively.

Current Behavior

1. setFanSpeed command is sent with a value of 3.
2. in all cases the correct percentage is shown momentarily before changing to 0%. This is similar to issue #326 but for the 4-speed fan.

Steps to Reproduce (for bugs)

Provide a link to a live example, or an unambiguous set of steps to reproduce this bug. Include code to reproduce, if relevant

1. Add Device Handler to Smartthings IDE

metadata {
    definition(name: "Fan Controller v3.0", namespace: "Damien Emmerson", author: "Damien Emmerson", vid: "generic-fan", ocfDeviceType: "oic.d.fan") {
    capability "switch"
        capability "Actuator"
        capability "Fan Speed"

        command "setStatus"
    }

    simulator {
    }

    preferences {
            input "defaultOnSpeed", "number", title: "Default On Speed", description: "Set the default On speed", defaultValue: 4, range: "1..4", required: false, displayDuringSetup: false
    }
}

def parse(String description) {
    log.debug(description)
}

def setFanSpeed(speed) {
    sendEvent(name: "fanSpeed", value: speed, displayed: true)
    if (speed == 0) {
        sendEvent(name: "switch", value: "off", displayed: true)
    } else {
        sendEvent(name: "switch", value: "on", displayed: true)
    }
}

def on() {
    setFanSpeed(defaultOnSpeed ?: state.defaultOnSpeed ?: 4)
}

def off() {
    setFanSpeed(0)
}

def setStatus(type, status) {
    sendEvent(name: type, value: status)
}

2. Create a simulated fan device using the device handler above.
3. Add the simulated fan device to the 4-speed fan category in the homebridge smartapp
4. [Issue 1] Turn the fan on to high in the Home app. The fan turns on to med-high. See log output below.

Log output: NOTICE: Sending Device Command: on | Name: (Simulated Fan) | DeviceID: (9c001bc6-6f3b-4ffd-bfb1-93f9a0c0d709) | SendToLocalHub: (false) NOTICE: Sending Device Command: setFanSpeed | Value: {"value1":3} | Name: (Simulated Fan) | DeviceID: (9c001bc6-6f3b-4ffd-bfb1-93f9a0c0d709) | SendToLocalHub: (false)

5. [Issue 2] Set the fan so any speed in the home app. The fan will change speed but fan speed slider in the Home App will change to 0%.

Context

The issue means you can never turn a fan on to high. It also means that the reported speed in the Home app is different to that in Smartthings.