After updating magisk phone won't boot

[kyaros]

Device: moto e5 play (pettyl) Android version:8.1 Magisk version name: v25 Magisk version code:24102 after updating to v24/25 of magisk, phone won't boot just stays on boot logo i had to flash v23 to get it working again

magisk_patched.zip magisk_install_log_2022-02-09T20_14_04.log boot.zip

[yujincheng08]

Need bugreport

[kyaros]

boot logcat and dmesg?

[yujincheng08]

actually, we need the last_kmsg. maybe /proc/last_kmsg or /sys/fs/pstore/console-ramoops

[kyaros]

i think is this

[yujincheng08]

what?

[kyaros]

``` [ 0.000000,0] Booting Linux on physical CPU 0x100 [ 0.000000,0] Initializing cgroup subsys cpu [ 0.000000,0] Initializing cgroup subsys cpuacct [ 0.000000,0] Linux version 3.18.71-perf-g2a2747c-00001-gdba142a (hudsoncm@ilclbld27) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Tue Jul 10 05:03:07 CDT 2018 [ 0.000000,0] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c0383d [ 0.000000,0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000,0] Machine model: pettyl [ 0.000000,0] Reserved memory: reserved region for node 'other_ext_region@0': base 0x85300000, size 21 MiB [ 0.000000,0] Reserved memory: reserved region for node 'modem_region@0': base 0x86800000, size 80 MiB [ 0.000000,0] Reserved memory: reserved region for node 'adsp_fw_region@0': base 0x8b800000, size 17 MiB [ 0.000000,0] Reserved memory: reserved region for node 'wcnss_fw_region@0': base 0x8c900000, size 7 MiB [ 0.000000,0] Reserved memory: reserved region for node 'splash_region@83000000': base 0x90000000, size 20 MiB [ 0.000000,0] Reserved memory: reserved region for node 'ramoops_mem_region': base 0xae000000, size 0 MiB [ 0.000000,0] Reserved memory: reserved region for node 'tzlog_bck_region': base 0xae400000, size 0 MiB [ 0.000000,0] Reserved memory: reserved region for node 'wdog_cpuctx_region': base 0xae800000, size 0 MiB [ 0.000000,0] Removed memory: created DMA memory pool at 0x85300000, size 21 MiB [ 0.000000,0] Reserved memory: initialized node other_ext_region@0, compatible id removed-dma-pool [ 0.000000,0] Removed memory: created DMA memory pool at 0x86800000, size 80 MiB [ 0.000000,0] Reserved memory: initialized node modem_region@0, compatible id removed-dma-pool [ 0.000000,0] Removed memory: created DMA memory pool at 0x8b800000, size 17 MiB [ 0.000000,0] Reserved memory: initialized node adsp_fw_region@0, compatible id removed-dma-pool [ 0.000000,0] Removed memory: created DMA memory pool at 0x8c900000, size 7 MiB [ 0.000000,0] Reserved memory: initialized node wcnss_fw_region@0, compatible id removed-dma-pool [ 0.000000,0] Reserved memory: allocated memory for 'venus_region@0' node: base 0x8f800000, size 8 MiB [ 0.000000,0] Reserved memory: created CMA memory pool at 0x8f800000, size 8 MiB [ 0.000000,0] Reserved memory: initialized node venus_region@0, compatible id shared-dma-pool [ 0.000000,0] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0xbf000000, size 16 MiB [ 0.000000,0] Reserved memory: created CMA memory pool at 0xbf000000, size 16 MiB [ 0.000000,0] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool [ 0.000000,0] Reserved memory: allocated memory for 'adsp_region@0' node: base 0xbec00000, size 4 MiB [ 0.000000,0] Reserved memory: created CMA memory pool at 0xbec00000, size 4 MiB [ 0.000000,0] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool [ 0.000000,0] cma: Reserved 16 MiB at 0xbdc00000 [ 0.000000,0] Memory policy: Data cache writealloc [ 0.000000,0] psci: probing for conduit method from DT. [ 0.000000,0] psci: PSCIv1.0 detected in firmware. [ 0.000000,0] psci: Using standard PSCI v0.2 function IDs [ 0.000000,0] PERCPU: max_distance=0xb000 too large for vmalloc space 0x0 [ 0.000000,0] PERCPU: Embedded 11 pages/cpu @e5728000 s14976 r8192 d21888 u45056 [ 0.000000,0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 228785 [ 0.000000,0] Kernel command line: sched_enable_hmp=1 console=null androidboot.hardware=qcom user_debug=30 msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlycon=msm_hsl_uart,0x78B0000 vmalloc=400M buildvariant=user androidboot.selinux=permissive androidboot.emmc=true androidboot.serialno=ZY3267K3FB androidboot.baseband=msm androidboot.mode=normal androidboot.device=pettyl androidboot.hwrev=0x8300 androidboot.radio=LATAM androidboot.powerup_reason=0x00000080 androidboot.bootreason=power_key_press msm_poweroff.download_mode=0 androidboot.fsg-id= androidboot.wifimacaddr=24:46:C8:EB:3E:56,24:46:C8:EB:3E:57 androidboot.btmacaddr=24:46:C8:EB:3E:55 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_mot_hlt_534_qhd_video_v0 androidboot.bootloader=0xBEC2 androidboot.carrier=retar androidboot.poweroff_alarm=0 androidboot.hardware.sku=XT1920-18 androidboot.secure_hardware=1 androidboot.bl_state=2 androidboot.cid=0x32 androidboot.uid=8C19C6380000000000000000[ 0.000000,0] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000,0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000,0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000,0] allocated 2097152 bytes of page_cgroup [ 0.000000,0] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000,0] Memory: 813652K/920004K available (13312K kernel code, 1165K rwdata, 5652K rodata, 502K init, 3944K bss, 61296K reserved, 45056K cma-reserved, 388548K highmem) [ 0.000000,0] Virtual kernel memory layout: [ 0.000000,0] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000,0] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000,0] vmalloc : 0xe6000000 - 0xff000000 ( 400 MB) [ 0.000000,0] lowmem : 0xcd000000 - 0xe6000000 ( 400 MB) [ 0.000000,0] vmalloc : 0xc5300000 - 0xcd000000 ( 125 MB) [ 0.000000,0] lowmem : 0xc0000000 - 0xc5300000 ( 83 MB) [ 0.000000,0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000,0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000,0] .text : 0xc0008000 - 0xc0e00000 (14304 kB) [ 0.000000,0] .init : 0xc1400000 - 0xc147da80 ( 503 kB) [ 0.000000,0] .data : 0xc1500000 - 0xc1623424 (1166 kB) [ 0.000000,0] .bss : 0xc16234e8 - 0xc19fd8a8 (3945 kB) [ 0.000000,0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000,0] HMP scheduling enabled. [ 0.000000,0] Preemptible hierarchical RCU implementation. [ 0.000000,0] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000,0] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000,0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000,0] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000,0] [ 0.000000,0] ********************************************************** [ 0.000000,0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000,0] ** ** [ 0.000000,0] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000,0] ** ** [ 0.000000,0] ** This means that this is a DEBUG kernel and it is ** [ 0.000000,0] ** unsafe for produciton use. ** [ 0.000000,0] ** ** [ 0.000000,0] ** If you see this message and you are not debugging ** [ 0.000000,0] ** the kernel, report this immediately to your vendor! ** [ 0.000000,0] ** ** [ 0.000000,0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000,0] ********************************************************** [ 0.000000,0] NR_IRQS:16 nr_irqs:16 16 [ 0.000000,0] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent [ 0.000000,0] MPM 1 irq mapping errored -517 [ 0.000000,0] Offload RCU callbacks from all CPUs [ 0.000000,0] Offload RCU callbacks from CPUs: 0-3. [ 0.000000,0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000005,0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns [ 0.000018,0] Switching to timer-based delay loop, resolution 52ns [ 0.000032,0] Switched to clocksource arch_sys_counter [ 0.000649,0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000) [ 0.000664,0] pid_max: default: 32768 minimum: 301 [ 0.000734,0] Security Framework initialized [ 0.000747,0] SELinux: Initializing. [ 0.000821,0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000831,0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001474,0] Initializing cgroup subsys memory [ 0.001495,0] Initializing cgroup subsys freezer [ 0.001533,0] CPU: Testing write buffer coherency: ok [ 0.001759,0] /cpus/cpu-map/cluster0: empty cluster [ 0.001930,0] Setting up static identity map for 0x80d29b80 - 0x80d29bd8 [ 0.002921,0] NOHZ: local_softirq_pending 02 [ 0.010420,0] MSM Memory Dump base table set up [ 0.010448,0] MSM Memory Dump apps data table set up [ 0.010500,0] Configuring XPU violations to be fatal errors [ 0.017258,1] CPU1: Booted secondary processor [ 0.022075,2] CPU2: Booted secondary processor [ 0.026934,3] CPU3: Booted secondary processor [ 0.027089,0] Brought up 4 CPUs [ 0.027115,0] SMP: Total of 4 processors activated (153.00 BogoMIPS). [ 0.027123,0] CPU: All CPU(s) started in SVC mode. [ 0.036346,2] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.038868,2] pinctrl core: initialized pinctrl subsystem [ 0.039262,2] regulator-dummy: no parameters [ 0.110289,2] NET: Registered protocol family 16 [ 0.115799,2] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.116577,2] scm_call failed: func id 0x2000101, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 0.126790,2] cpuidle: using governor ladder [ 0.140115,2] cpuidle: using governor menu [ 0.153457,2] cpuidle: using governor qcom [ 0.185549,2] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000 [ 0.195979,2] msm_watchdog b017000.qcom,wdt: wdog absent resource not present [ 0.196364,2] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized [ 0.202533,2] irq: no irq domain found for /soc/pinctrl@1000000 ! [ 0.202782,2] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0 [ 0.203581,2] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0 [ 0.204026,2] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0 [ 0.204465,2] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0 [ 0.204705,2] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0 [ 0.205453,2] ACC: mem_acc_efuse_init: efuse_addr = 0x000a4000 (len=0x1000) [ 0.205636,2] ACC: mem_acc_parse_override_fuse_version_map: qcom,override-fuse-version-map tuple match not found [ 0.205775,2] mem_acc_corner: 0 <--> 0 mV at 0 mV [ 0.210576,2] irq: no irq domain found for /soc/pinctrl@1000000 ! [ 0.211085,2] persistent_ram: persistent_ram: paddr: ae000000, vaddr: c5480000, buf size = 0x1fff4 [ 0.211105,2] persistent_ram: persistent_ram: paddr: ae020000, vaddr: c5500000, buf size = 0x3fff4 [ 0.211122,2] persistent_ram: persistent_ram: paddr: ae060000, vaddr: c5462000, buf size = 0x7f4 [ 0.211926,2] console [pstore-1] enabled [ 0.211936,2] pstore: Registered ramoops as persistent store backend [ 0.211948,2] ramoops: attached 0x80000@0xae000000, ecc: 0/0 [ 0.213456,2] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.213469,2] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.215621,2] __of_mpm_init(): MPM driver mapping exists [ 0.217344,2] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches [ 0.217358,2] msm_rpm_dev_probe: APSS-RPM communication over SMD [ 0.218372,2] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 [ 0.223901,2] smd_channel_probe_now: allocation table not initialized [ 0.224076,2] smd_channel_probe_now: allocation table not initialized [ 0.224237,2] smd_channel_probe_now: allocation table not initialized [ 0.229929,2] pm8917_s5: 1050 <--> 1350 mV at 1225 mV normal idle [ 0.230144,2] spm_regulator_probe: name=pm8917_s5, range=LV, voltage=1225000 uV, mode=AUTO, step rate=1200 uV/us [ 0.230854,2] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000) [ 0.230899,2] cpr_read_fuse_revision: apc_corner: fuse revision = 2 [ 0.230917,2] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x38a0b82138c6198c, speed_bits = 0 [ 0.230936,2] cpr_parse_pvs_version_fuse: apc_corner: [row: 37]: 0x38a0b82138c6198c, pvs_version = 0 [ 0.231027,2] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[1]: 1115000 -> 1145000 uV [ 0.231045,2] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1165000 -> 1170000 uV [ 0.231062,2] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[3]: 1290000 -> 1300000 uV [ 0.231078,2] cpr_pvs_init: apc_corner: pvs voltage: [1145000 1170000 1300000] uV [ 0.231091,2] cpr_pvs_init: apc_corner: ceiling voltage: [1155000 1225000 1350000] uV [ 0.231104,2] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1090000] uV [ 0.231310,2] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 4 [ 0.231342,2] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default. [ 0.231375,2] cpr_init_cpr_efuse: apc_corner: [row:67] = 0x248e4243e8993066 [ 0.231401,2] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 912 [ 0.231414,2] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 1000 [ 0.231427,2] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1217 [ 0.231459,2] cpr_adjust_target_quots: apc_corner: Corner[1]: adjusted target quot = 962 [ 0.231475,2] cpr_adjust_target_quots: apc_corner: Corner[2]: adjusted target quot = 1040 [ 0.231491,2] cpr_adjust_target_quots: apc_corner: Corner[3]: adjusted target quot = 1267 [ 0.231587,2] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.582 [ 0.231600,2] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.739 [ 0.231617,2] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 962 [ 0.231629,2] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 1040 [ 0.231639,2] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 1154 [ 0.231650,2] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 1267 [ 0.231661,2] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 1267 [ 0.231839,2] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us) [ 0.232235,2] apc_corner: 0 <--> 0 mV [ 0.237912,2] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe [ 0.237930,2] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues. [ 0.237948,2] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues [ 0.237962,2] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 [ 0.239165,2] sps:sps is ready. [ 0.241930,2] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0! [ 0.241947,2] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0 [ 0.245181,0] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches [ 0.245198,0] msm_rpm_dev_probe: APSS-RPM communication over SMD [ 0.245958,1] pm8917_s1: 1000 <--> 1225 mV at 1000 mV normal idle [ 0.246792,1] pm8917_s2_level: 0 <--> 0 mV at 0 mV normal idle [ 0.247337,1] pm8917_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle [ 0.247860,1] pm8917_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle [ 0.248584,1] pm8917_s3: 1300 mV normal idle [ 0.249266,1] pm8917_s4: 2050 mV normal idle [ 0.249931,1] pm8917_l2: 1200 mV normal idle [ 0.250660,1] pm8917_l3_level_ao: 0 <--> 0 mV at 0 mV normal idle [ 0.251163,1] pm8917_l3_level_so: 0 <--> 0 mV at 0 mV normal idle [ 0.251835,1] pm8917_l5: 1800 mV normal idle [ 0.252751,1] pm8917_l6: 1800 mV normal idle [ 0.253477,1] pm8917_l7: 1800 mV normal idle [ 0.253977,1] pm8917_l7_ao: 1800 mV normal idle [ 0.254689,1] pm8917_l8: 2850 <--> 2900 mV at 2900 mV normal idle [ 0.255378,1] pm8917_l9: 3000 <--> 3300 mV at 3000 mV normal idle [ 0.256580,1] pm8917_l10: 2800 <--> 3000 mV at 2800 mV normal idle [ 0.257331,1] pm8917_l11: 2950 mV normal idle [ 0.258039,1] pm8917_l12: 1800 <--> 2950 mV at 1800 mV normal idle [ 0.258758,1] pm8917_l13: 3075 mV normal idle [ 0.259468,1] pm8917_l14: 1800 <--> 3300 mV at 1800 mV normal idle [ 0.260214,1] pm8917_l15: 1800 <--> 3300 mV at 1800 mV normal idle [ 0.260941,1] pm8917_l16: 1800 mV normal idle [ 0.261902,1] pm8917_l17: 2800 <--> 2900 mV at 2800 mV normal idle [ 0.262634,1] pm8917_l19: 1225 <--> 1350 mV at 1225 mV normal idle [ 0.263395,1] pm8917_l22: 2850 mV normal idle [ 0.264063,1] pm8917_l23: 1200 mV normal idle [ 0.264737,1] pm8917_l18: 2700 mV normal idle [ 0.265182,1] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 [ 0.265998,1] msm_thermal:sensor_mgr_init_threshold threshold id already initialized [ 0.266433,1] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init. [ 0.267636,3] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0! [ 0.267654,3] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0 [ 0.268958,3] qcom,gcc-8952 1800000.qcom,gcc: GPU speed bin: 0 [ 0.286961,3] qcom,gcc-8952 1800000.qcom,gcc: Registered GCC clocks [ 0.287959,3] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0! [ 0.287979,3] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0 [ 0.289054,2] populate_opp_table: clock-cpu-8939: OPP tables populated (cpu 0 and 3) [ 0.289068,3] print_opp_table: clock_cpu: a53_c1: OPP voltage for 960000000: 1145000 [ 0.289081,3] print_opp_table: clock_cpu: a53_c1: OPP voltage for 1401000000: 1300000 [ 0.351714,2] qcom,qpnp-pin qpnp-pin-9: qpnp_pin_probe: no device nodes specified in topology [ 0.351742,2] qcom,qpnp-pin: probe of qpnp-pin-9 failed with error -22 [ 0.351794,2] qcom,qpnp-pin qpnp-pin-15: qpnp_pin_probe: no device nodes specified in topology [ 0.351813,2] qcom,qpnp-pin: probe of qpnp-pin-15 failed with error -22 [ 0.352372,2] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping [ 0.354899,2] KPI: Bootloader start count = 60299 [ 0.354915,2] KPI: Bootloader end count = 865112 [ 0.354926,2] KPI: Bootloader display count = 2285904646 [ 0.354935,2] KPI: Bootloader load kernel count = 2692 [ 0.354945,2] KPI: Kernel MPM timestamp = 899936 [ 0.354954,2] KPI: Kernel MPM Clock frequency = 32768 [ 0.354980,2] socinfo_print: v0.10, id=303, ver=1.0, raw_id=86, raw_ver=0, hw_plat=8, hw_plat_ver=65536 [ 0.354980,2] accessory_chip=0, hw_plat_subtype=0, pmic_model=65561, pmic_die_revision=65536 foundry_id=1 serial_number=952506764 [ 0.356120,2] vdda_touch: no parameters [ 0.356865,2] vdd_sar_vreg: no parameters [ 0.358185,2] SCSI subsystem initialized [ 0.359027,2] usbcore: registered new interface driver usbfs [ 0.359105,2] usbcore: registered new interface driver hub [ 0.359264,2] usbcore: registered new device driver usb [ 0.360399,2] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2 [ 0.360732,3] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.360747,2] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) [ 0.362244,2] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2 [ 0.362541,2] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.362556,2] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) [ 0.363965,2] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2 [ 0.364256,2] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.364271,2] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) [ 0.365161,2] media: Linux media interface: v0.10 [ 0.365236,2] Linux video capture interface: v2.00 [ 0.365329,2] EDAC MC: Ver: 3.0.0 [ 0.386883,2] cpufreq: driver msm up and running [ 0.387564,2] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0 [ 0.387820,2] ION heap system created [ 0.387948,2] ION heap mm created at 0xbdc00000 with size 1000000 [ 0.387962,2] ION heap qsecom created at 0xbf000000 with size 1000000 [ 0.388427,2] msm_bus_fabric_init_driver [ 0.401581,2] qcom,qpnp-power-on qpnp-power-on-4: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot [ 0.401606,2] qcom,qpnp-power-on qpnp-power-on-4: PMIC@SID0: Unknown power-off reason [ 0.401792,2] input: qpnp_pon as /devices/virtual/input/input0 [ 0.402170,2] pon_spare_reg: no parameters [ 0.402256,2] qcom,qpnp-power-on qpnp-power-on-13: No PON config. specified [ 0.402307,2] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot [ 0.402325,2] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown) [ 0.402505,2] PMIC@SID0: PM8937 v1.0 options: 2, 2, 0, 0 [ 0.402599,2] PMIC@SID2: PMI8940 v2.0 options: 0, 0, 0, 0 [ 0.404128,2] gdsc_venus: no parameters [ 0.404472,2] gdsc_mdss: no parameters [ 0.404777,2] gdsc_jpeg: no parameters [ 0.405379,2] gdsc_vfe: no parameters [ 0.405964,2] gdsc_vfe1: no parameters [ 0.406287,2] gdsc_cpp: no parameters [ 0.406607,2] gdsc_oxili_gx: no parameters [ 0.406866,2] gdsc_venus_core0: fast normal [ 0.407622,2] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL [ 0.407634,2] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled [ 0.407655,2] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22 [ 0.407669,2] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22 [ 0.408310,2] dsi_pll_clock_register_lpm: Registered DSI PLL:0 clocks successfully [ 0.409403,2] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at c5760000, with 1 ctx banks [ 0.410132,2] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at c5780000, with 21 ctx banks [ 0.417589,2] msm_iommu_ctx 1f08000.qcom,iommu-ctx: context gfx3d_user using bank 0 [ 0.417770,2] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context q6 using bank 0 [ 0.417926,2] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1 [ 0.418086,2] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2 [ 0.418253,2] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3 [ 0.418420,2] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4 [ 0.418595,2] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5 [ 0.418758,2] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6 [ 0.418959,2] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8 [ 0.419160,2] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context mss_nav using bank 9 [ 0.419353,2] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10 [ 0.419548,2] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11 [ 0.419748,2] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15 [ 0.419946,2] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16 [ 0.420178,2] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17 [ 0.420378,2] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18 [ 0.420578,2] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19 [ 0.420777,2] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20 [ 0.420981,2] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21 [ 0.421181,2] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22 [ 0.421383,2] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context mss_mcdma using bank 24 [ 0.421576,2] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23 [ 0.424716,2] Advanced Linux Sound Architecture Driver Initialized. [ 0.425765,2] Bluetooth: e5211ec8 [ 0.425797,2] NET: Registered protocol family 31 [ 0.425805,2] Bluetooth: e5211ec8 [ 0.425814,2] Bluetooth: e5211ec0Bluetooth: e5211ea8 [ 0.425854,2] Bluetooth: e5211eb8[ 0.426175,2] cfg80211: Calling CRDA to update world regulatory domain [ 0.426195,2] cfg80211: World regulatory domain updated: [ 0.426201,2] cfg80211: DFS Master region: unset [ 0.426206,2] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 0.426216,2] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 0.426224,2] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 0.426231,2] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 0.426238,2] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 0.426246,2] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 0.426253,2] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 0.426260,2] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 0.426268,2] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 0.426687,1] ibb_reg: 4600 <--> 6000 mV at 5500 mV [ 0.427009,1] lab_reg: 4600 <--> 6000 mV at 5500 mV [ 0.429648,3] Switched to clocksource arch_sys_counter [ 0.462557,3] NET: Registered protocol family 2 [ 0.462982,3] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.463014,3] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.463059,3] TCP: Hash tables configured (established 4096 bind 4096) [ 0.463093,3] TCP: reno registered [ 0.463102,3] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.463118,3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.463231,3] NET: Registered protocol family 1 [ 0.464548,3] gcc-mdss-8952 soc:qcom,gcc-mdss@1800000: Registered GCC MDSS clocks. [ 0.465715,3] Trying to unpack rootfs image as initramfs... [ 0.640913,2] Freeing initrd memory: 4496K [ 0.644108,2] hw perfevents: enabled with ARMv8 Cortex-A53 PMU driver, 7 counters available [ 0.647680,2] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.647743,2] audit: initializing netlink subsys (disabled) [ 0.647785,2] audit: type=2000 audit(0.646:1): initialized [ 0.648196,2] vmscan: error setting kswapd cpu affinity mask [ 0.652572,2] VFS: Disk quotas dquot_6.5.2 [ 0.652686,2] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.653767,2] exFAT: Version 1.2.9 [ 0.654454,2] Registering sdcardfs 0.1 [ 0.654603,2] fuse init (API version 7.23) [ 0.656946,1] bounce: pool size: 64 pages [ 0.657061,1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.657073,1] io scheduler noop registered [ 0.657083,1] io scheduler deadline registered [ 0.657181,1] io scheduler cfq registered (default) [ 0.661165,1] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found [ 0.661180,1] mdss_mdp_probe+0x18c/0x1088->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed [ 0.661814,1] mdss_mdp_irq_clk_register: unable to get clk: lut_clk [ 0.662499,1] No change in context(0==0), skip [ 0.662953,1] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0 [ 0.662979,1] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1 [ 0.662987,1] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2 [ 0.663009,1] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3 [ 0.663029,1] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0 [ 0.663044,1] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read [ 0.663172,1] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read [ 0.663583,3] xlog_status: enable:0, panic:1, dump:2 [ 0.664295,3] mdss_mdp_probe: mdss version = 0x100f0000, bootloader display is on, num 1, intf_sel=0x00000100 [ 0.667059,3] mdss_smmu_util_parse_dt_clock: clocks are not defined [ 0.667095,3] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful! [ 0.667123,3] mdss_smmu_util_parse_dt_clock: clocks are not defined [ 0.667135,3] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful! [ 0.668321,3] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.668339,3] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.668355,3] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.669112,3] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0 [ 0.669798,3] mdss_panel_parse_panel_config_dt: BL: panel=mipi_mot_video_hlt_qhd_534, manufacture_id(0xDA)= 0x1D controller_ver(0xDB)= 0xD3 controller_drv_ver(0XDC)= 0xC4, full=0x0000000000C4D31D [ 0.669810,3] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_mot_hlt_534_qhd_video_v0 panel_name:qcom,mdss_dsi_mot_hlt_534_qhd_video_v0 [ 0.669853,3] mdss_dsi_panel_init: Panel Name = mipi_mot_video_hlt_qhd_534 [ 0.670122,3] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_mot_hlt_534_qhd_video_v0" (e52117a0) [ 0.670149,3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command [ 0.670162,3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command [ 0.670168,3] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node: [ 0.670316,3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command [ 0.670328,3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command [ 0.670369,3] mdss_dsi_parse_panel_features: ulps feature disabled [ 0.670378,2] mdss_dsi_parse_panel_features: ulps during suspend feature enabled [ 0.670387,3] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0 [ 0.670503,3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on [ 0.670515,3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off [ 0.670576,3] mdss_panel_parse_param_prop: HBM feature enabled with 2 dt cmds [ 0.670582,3] mdss_panel_parse_param_prop: HBM type = 1 [ 0.670637,3] mdss_panel_parse_param_prop: CABC feature enabled with 3 dt cmds [ 0.670649,3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on [ 0.670661,3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off [ 0.670684,3] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.670699,3] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.670884,3] mdss_dsi_parse_gpio_params:4125, TE gpio not specified [ 0.670892,3] mdss_dsi_parse_gpio_params: bklt_en gpio not specified [ 0.670927,3] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=c570cb80 phy_regulator_size=30 [ 0.670935,3] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c55f6000 ctrl_size=300 phy_base=c5702400 phy_size=280 [ 0.671240,3] dsi_panel_device_register: Continuous splash enabled [ 0.671491,3] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0 [ 0.692780,3] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x1 [ 0.693184,3] mdss_dsi_status_init: DSI status check interval:8000 [ 0.693781,3] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel [ 0.694685,3] mdss_fb_probe: fb0: split_mode:0 left:0 right:0 [ 0.695233,3] mdss_fb_register: FrameBuffer[0] 480x960 registered successfully! [ 0.695720,3] mdss_fb_probe: fb1: split_mode:0 left:0 right:0 [ 0.695836,3] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully! [ 0.695965,3] mdss_mdp_splash_parse_dt: splash mem child node is not present [ 0.695998,3] anx7805 anx7805_init: anx7805_init [ 0.696054,1] anx7805 anx7805_init_async: anx7805_init_async [ 0.699556,3] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR [ 0.699588,3] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR [ 0.704547,1] In memshare_probe, Memshare probe success [ 0.706796,1] msm_rpm_log_probe: OK [ 0.710813,1] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped. [ 0.713063,1] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id. [ 0.713683,1] mmi_unit_info (SMEM) for modem: version = 0x03, device = 'pettyl', radio = 0x0, radio_str = 'LATAM', system_rev = 0x8300, system_serial = 0x8c19c63800000000, machine = 'Qualcomm Technologies, Inc. MSM ', barcode = 'ZY3267K3FB', baseband = '', carrier = 'retar', pu_reason = 0x00000080 [ 0.713719,1] ACPU Bin is not available. [ 0.713776,1] mmi_storage_info :eMMC: 16GB SAMSUNG FE62MB FV=0000000000000003 [ 0.714505,1] msm_serial_hs module loaded [ 0.733350,1] brd: module loaded [ 0.735442,1] loop: module loaded [ 0.735776,1] zram: Added device: zram0 [ 0.736258,1] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000 [ 0.736287,3] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE [ 0.736297,1] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem [ 0.736306,1] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0 [ 0.737149,1] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1 [ 0.739223,1] alsa-to-h2w soc:alsa_to_h2w: alsa_to_h2w_probe success [ 0.740222,1] i2c-core: driver [tabla-i2c-core] using legacy suspend method [ 0.740229,1] i2c-core: driver [tabla-i2c-core] using legacy resume method [ 0.740323,1] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method [ 0.740329,1] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method [ 0.740429,1] i2c-core: driver [tasha-i2c-core] using legacy suspend method [ 0.740435,1] i2c-core: driver [tasha-i2c-core] using legacy resume method [ 0.740749,1] Loading pn544 driver [ 0.741000,1] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 [ 0.741901,1] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000 [ 0.741914,1] qce 720000.qcedev: CE device = 0x0 [ 0.741914,1] IO base, CE = 0xc5a80000 [ 0.741914,1] Consumer (IN) PIPE 2, Producer (OUT) PIPE 3 [ 0.741914,1] IO base BAM = 0x00000000 [ 0.741914,1] BAM IRQ 141 [ 0.741914,1] Engines Availability = 0x2010853 [ 0.742114,1] sps:BAM 0x00704000 is registered. [ 0.742313,1] sps:BAM 0x00704000 (va:0xc5bc0000) enabled: ver:0x27, number of pipes:8 [ 0.742555,1] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 141 [ 0.745155,1] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 [ 0.746009,1] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000 [ 0.746021,1] qcrypto 720000.qcrypto: CE device = 0x0 [ 0.746021,1] IO base, CE = 0xc5f40000 [ 0.746021,1] Consumer (IN) PIPE 4, Producer (OUT) PIPE 5 [ 0.746021,1] IO base BAM = 0x00000000 [ 0.746021,1] BAM IRQ 141 [ 0.746021,1] Engines Availability = 0x2010853 [ 0.746365,1] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 141 [ 0.748091,1] qcrypto 720000.qcrypto: qcrypto-ecb-aes [ 0.748182,1] qcrypto 720000.qcrypto: qcrypto-cbc-aes [ 0.748270,1] qcrypto 720000.qcrypto: qcrypto-ctr-aes [ 0.748366,1] qcrypto 720000.qcrypto: qcrypto-ecb-des [ 0.748452,1] qcrypto 720000.qcrypto: qcrypto-cbc-des [ 0.748540,1] qcrypto 720000.qcrypto: qcrypto-ecb-3des [ 0.748626,1] qcrypto 720000.qcrypto: qcrypto-cbc-3des [ 0.748712,1] qcrypto 720000.qcrypto: qcrypto-xts-aes [ 0.748799,1] qcrypto 720000.qcrypto: qcrypto-sha1 [ 0.748889,1] qcrypto 720000.qcrypto: qcrypto-sha256 [ 0.748977,1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes [ 0.749064,1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des [ 0.749152,1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des [ 0.749240,1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes [ 0.749331,1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des [ 0.749419,1] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des [ 0.749506,1] qcrypto 720000.qcrypto: qcrypto-hmac-sha1 [ 0.749597,1] qcrypto 720000.qcrypto: qcrypto-hmac-sha256 [ 0.749684,1] qcrypto 720000.qcrypto: qcrypto-aes-ccm [ 0.749775,1] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm [ 0.751011,1] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed [ 0.751217,1] ICE IRQ = 143 [ 0.752258,1] SCSI Media Changer driver v0.25 [ 0.753929,1] tun: Universal TUN/TAP device driver, 1.6 [ 0.753937,1] tun: (C) 1999-2004 Max Krasnyansky [ 0.754009,1] PPP generic driver version 2.4.2 [ 0.754099,1] PPP BSD Compression module registered [ 0.754108,1] PPP Deflate Compression module registered [ 0.754126,1] PPP MPPE Compression module registered [ 0.754138,1] NET: Registered protocol family 24 [ 0.754759,1] wcnss_wlan probed in built-in mode [ 0.757551,1] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.757620,1] usbcore: registered new interface driver pegasus [ 0.757673,1] usbcore: registered new interface driver asix [ 0.757713,1] usbcore: registered new interface driver ax88179_178a [ 0.757752,1] usbcore: registered new interface driver cdc_ether [ 0.757791,1] usbcore: registered new interface driver net1080 [ 0.757831,1] usbcore: registered new interface driver cdc_subset [ 0.757869,1] usbcore: registered new interface driver zaurus [ 0.757910,1] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 0.758098,1] usbcore: registered new interface driver cdc_ncm [ 0.759488,0] scm_call failed: func id 0x2000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 0.759497,0] hyp_assign_table: Failed to assign memory protection, ret = -5 [ 0.759506,0] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160xbe000000 size=1572864 err=-5 [ 0.759575,1] msm_sharedmem: sharedmem_register_qmi: qmi init successful [ 0.759615,0] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' [ 0.760468,0] msm_otg 78db000.usb: msm_otg probe [ 0.764519,0] msm_otg 78db000.usb: OTG regs = c5774000 [ 0.770181,0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.770195,0] ehci-msm: Qualcomm On-Chip EHCI Host Controller [ 0.770719,0] Unable to get vbus_otg [ 0.770730,0] msm_hsusb_host msm_hsusb_host: unable to register with transceiver [ 0.770846,0] usbcore: registered new interface driver cdc_acm [ 0.770852,0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.770908,0] usbcore: registered new interface driver usb-storage [ 0.770948,0] usbcore: registered new interface driver ums-alauda [ 0.770983,0] usbcore: registered new interface driver ums-cypress [ 0.771018,0] usbcore: registered new interface driver ums-datafab [ 0.771053,0] usbcore: registered new interface driver ums-freecom [ 0.771088,0] usbcore: registered new interface driver ums-isd200 [ 0.771123,0] usbcore: registered new interface driver ums-jumpshot [ 0.771158,0] usbcore: registered new interface driver ums-karma [ 0.771196,0] usbcore: registered new interface driver ums-onetouch [ 0.771232,0] usbcore: registered new interface driver ums-sddr09 [ 0.771267,0] usbcore: registered new interface driver ums-sddr55 [ 0.771303,0] usbcore: registered new interface driver ums-usbat [ 0.771390,0] usbcore: registered new interface driver usbserial [ 0.771433,0] usbcore: registered new interface driver usb_ehset_test [ 0.772098,1] gbridge_init: gbridge_init successs. [ 0.772936,1] mousedev: PS/2 mouse device common for all mice [ 0.773137,1] usbcore: registered new interface driver xpad [ 0.773499,1] ft5x06_ts 3-0038: processing modifier config_modifier-charger[0] [ 0.773506,1] using charger detection [ 0.773611,1] ft5x06_ts 3-0038: processing modifier config_modifier-fps[1] [ 0.773618,1] sing fingerprint sensor detection [ 0.773625,1] using touch clip area in fps-active [ 0.773800,1] input: ft5x06_ts as /devices/soc/78b7000.i2c/i2c-3/3-0038/input/input1 [ 1.000280,1] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0xe (ok) [ 1.000490,1] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x38 MSTR_STS:0x011363c8 OPER:0x00000010 [ 1.000519,1] ft5x06_ts 3-0038: ft5x06_i2c_read: i2c read error. [ 1.000527,1] ft5x06_ts 3-0038: version read failed [ 1.054359,1] [NVT-ts] nvt_driver_init 1865: start [ 1.054400,1] nvt_driver_init: finished [ 1.055308,1] input: hbtp_vm as /devices/virtual/input/input2 [ 1.055560,1] et320_init enter [ 1.056325,1] etspi_probe initial [ 1.056354,1] etspi_parse_dt: sleepPin=127 [ 1.056362,1] etspi_parse_dt: drdyPin=128 [ 1.056370,1] etspi_parse_dt: 3.3v power pin=48 [ 1.056378,1] etspi_parse_dt: 18v power pin=132 [ 1.056384,1] etspi_parse_dt is successful [ 1.056389,1] etspi_platformInit [ 1.056403,1] etspi: vdd_18v_Pin set to high [ 1.057415,1] etspi: vcc_33v_Pin set to high [ 1.059426,1] etspi: reset to high [ 1.059435,1] ets320: etspi_platformInit successful status=0 [ 1.059505,1] Egis navigation driver, egis_input device init [ 1.059684,1] Egis navigation driver, uinput_egis_init [ 1.059805,0] nav_input_thread enter [ 1.059936,1] input: uinput-egis as /devices/virtual/input/input3 [ 1.060011,1] etspi:etspi_reset [ 1.113397,1] add_timer ---- [ 1.113404,1] etspi_probe : initialize success 0 [ 1.113579,1] et320_init done [ 1.113697,1] ABOVabov_probe() [ 1.113869,1] ABOVcap_vdd regulator is on [ 1.114117,1] ABOVcap_svdd regulator is on [ 1.114357,1] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0xf (ok) [ 1.114618,1] ABOVabov detect success! [ 1.114635,1] ABOV Initialized Main Memory: 0xc3a73800 [ 1.114642,1] ABOV Initialized Device Specific Memory: 0xc3a54680 [ 1.114795,1] input: ABOV Cap Touch top as /devices/virtual/input/input4 [ 1.114997,1] input: ABOV Cap Touch bottom as /devices/virtual/input/input5 [ 1.115485,1] ABOVregistered with threaded irq (185) [ 1.115659,1] ABOVwrite_register Addr: 0x6 Val: 0x10 Return: 2 [ 1.115665,1] ABOVSoftware Reset. Waiting device back to continue. [ 1.416733,1] ABOVDevice back from the reset, continuing. NIRQ = 0 [ 1.416739,1] ABOVGoing to Setup I2C Registers [ 1.416745,1] ABOVGoing to Write Reg: 0x7 Value: 0x0 [ 1.416913,1] ABOVwrite_register Addr: 0x7 Val: 0x0 Return: 2 [ 1.416920,1] ABOVGoing to Write Reg: 0x8 Value: 0x7 [ 1.417086,1] ABOVwrite_register Addr: 0x8 Val: 0x7 Return: 2 [ 1.417093,1] ABOVGoing to Write Reg: 0xfb Value: 0x1 [ 1.417260,1] ABOVwrite_register Addr: 0xfb Val: 0x1 Return: 2 [ 1.520218,1] ABOVwrite_register Addr: 0xfb Val: 0x1 Return: 2 [ 1.520428,1] ABOVread_register Addr: 0x4 Return: 0x0 [ 1.520435,1] ABOVExiting initialize(). NIRQ = 0 [ 1.520601,1] ABOVwrite_register Addr: 0x7 Val: 0x2 Return: 2 [ 1.520612,1] ABOVusb is not present [ 1.520631,1] ABOVcapsense_update_work: start update firmware [ 1.520745,3] i2c-core: driver [abov_sar] using legacy suspend method [ 1.520752,3] i2c-core: driver [abov_sar] using legacy resume method [ 1.521531,3] qcom,qpnp-rtc qpnp-rtc-7: rtc core: registered qpnp_rtc as rtc0 [ 1.521548,3] Current shipmode info is 0x88e = 0x62 [ 1.521563,3] Current shipmode info is 0x88e = 0x62 [ 1.521585,3] Write shipmode info to 0x88e with 0x0 [ 1.521752,3] i2c /dev entries driver [ 1.526290,3] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000 [ 1.526845,3] CAM-SMMU cam_populate_smmu_context_banks:1586 Invalid pointer of ctx : vfe_secure rc = -517 [ 1.526853,3] CAM-SMMU cam_smmu_probe:1636 Error: populating context banks [ 1.526866,3] msm_cam_smmu: probe of soc:qcom,cam_smmu:msm_cam_smmu_cb2 failed with error -12 [ 1.526947,3] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000 [ 1.527224,3] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000 [ 1.528142,3] CAM-SMMU cam_populate_smmu_context_banks:1586 Invalid pointer of ctx : vfe_secure rc = -517 [ 1.528150,3] CAM-SMMU cam_smmu_probe:1636 Error: populating context banks [ 1.528162,3] msm_cam_smmu: probe of soc:qcom,cam_smmu:msm_cam_smmu_cb2 failed with error -12 [ 1.530456,3] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts [ 1.533363,3] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts [ 1.534850,3] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts [ 1.538135,3] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts [ 1.539740,3] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts [ 1.541348,3] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts [ 1.542514,3] msm_actuator_platform_probe:2086 No valid actuator GPIOs data [ 1.543422,3] msm_eeprom_platform_probe failed 2029 [ 1.543857,3] msm_eeprom_platform_probe failed 2029 [ 1.544283,3] msm_eeprom_platform_probe failed 2029 [ 1.544684,3] msm_eeprom_platform_probe failed 2029 [ 1.545791,3] msm_flash_get_pmic_source_info:1000 alternate current: read failed [ 1.545801,3] msm_flash_get_pmic_source_info:1020 alternate max-current: read failed [ 1.545808,3] msm_flash_get_pmic_source_info:1040 alternate duration: read failed [ 1.545856,3] msm_flash_get_pmic_source_info:1000 alternate current: read failed [ 1.545863,3] msm_flash_get_pmic_source_info:1020 alternate max-current: read failed [ 1.545870,3] msm_flash_get_pmic_source_info:1040 alternate duration: read failed [ 1.545918,3] msm_flash_get_pmic_source_info:1110 alternate current: read failed [ 1.545926,3] msm_flash_get_pmic_source_info:1130 alternate current: read failed [ 1.545973,3] msm_flash_get_pmic_source_info:1110 alternate current: read failed [ 1.545980,3] msm_flash_get_pmic_source_info:1130 alternate current: read failed [ 1.545988,3] msm_flash_get_dt_data:1203 No valid flash GPIOs data [ 1.545995,3] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts [ 1.547234,1] adp1660 i2c_add_driver success [ 1.554584,3] ------------[ cut here ]------------ [ 1.554603,3] WARNING: CPU: 3 PID: 1 at ../../../../../../kernel/drivers/clk/msm/clock-local2.c:233 rcg_clk_enable+0x34/0x98() [ 1.554610,3] Attempting to prepare camss_top_ahb_clk_src before setting its rate. Set the rate first! [ 1.554615,3] Modules linked in: [ 1.554626,3] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.18.71-perf-g2a2747c-00001-gdba142a #1 [ 1.554643,3] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 1.554656,3] [] (show_stack) from [] (dump_stack+0x78/0x98) [ 1.554669,3] [] (dump_stack) from [] (warn_slowpath_common+0x64/0x88) [ 1.554680,3] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x2c/0x3c) [ 1.554691,3] [] (warn_slowpath_fmt) from [] (rcg_clk_enable+0x34/0x98) [ 1.554703,3] [] (rcg_clk_enable) from [] (clk_enable+0x158/0x1e4) [ 1.554714,3] [] (clk_enable) from [] (clk_enable+0x80/0x1e4) [ 1.554726,3] [] (clk_enable) from [] (msm_camera_clk_enable+0xe8/0x1d8) [ 1.554738,3] [] (msm_camera_clk_enable) from [] (cpp_init_hardware+0xa0/0x468) [ 1.554749,3] [] (cpp_init_hardware) from [] (cpp_probe+0x2ec/0x65c) [ 1.554759,3] [] (cpp_probe) from [] (platform_drv_probe+0x30/0x78) [ 1.554772,3] [] (platform_drv_probe) from [] (driver_probe_device+0xb8/0x1f0) [ 1.554784,3] [] (driver_probe_device) from [] (__driver_attach+0x68/0x8c) [ 1.554795,3] [] (__driver_attach) from [] (bus_for_each_dev+0x70/0x84) [ 1.554806,3] [] (bus_for_each_dev) from [] (bus_add_driver+0xc8/0x1e0) [ 1.554818,3] [] (bus_add_driver) from [] (driver_register+0x9c/0xe0) [ 1.554829,3] [] (driver_register) from [] (do_one_initcall+0x1a8/0x1e4) [ 1.554841,3] [] (do_one_initcall) from [] (kernel_init_freeable+0x11c/0x1e0) [ 1.554853,3] [] (kernel_init_freeable) from [] (kernel_init+0x8/0x10c) [ 1.554865,3] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 1.554899,3] ---[ end trace 639c1df2fcbb99bd ]--- [ 1.554928,3] MSM-CPP cpp_init_hardware:1005 CPP HW Version: 0x40030004 [ 1.554937,3] MSM-CPP cpp_init_hardware:1023 stream_cnt:0 [ 1.557078,3] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found [ 1.557089,3] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found [ 1.559146,3] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found [ 1.559157,3] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found [ 1.572373,3] __msm_jpeg_init:1537] Jpeg Device id 0 [ 1.574713,3] usbcore: registered new interface driver uvcvideo [ 1.574724,3] USB Video Class driver (1.1.1) [ 1.575591,3] FG: fg_check_ima_exception: Initial ima_err_sts=0 ima_exp_sts=0 ima_hw_sts=0 [ 1.576784,3] FG: fg_power_get_property: ESR Bad: -22 mOhm [ 1.577112,3] FG: fg_power_get_property: ESR Bad: -22 mOhm [ 1.577179,3] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=64 [ 1.578032,3] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent! [ 1.578351,3] SMBCHG: smbchg_wa_config: PMIC subtype 64 not supported, WA flags not set [ 1.578709,3] qpnp-smbcharger qpnp-smbcharger-17: length=6 [ 1.578763,3] qpnp-smbcharger qpnp-smbcharger-17: num parallel charge entries=6 [ 1.579275,3] smbcharger_charger_otg: no parameters [ 1.580871,0] FG: fg_vbat_est_check: vbat(-22),est-vbat(-22),diff(0),threshold(40000) [ 1.603784,0] FG: fg_vbat_est_check: vbat(-22),est-vbat(-22),diff(0),threshold(40000) [ 1.603966,0] FG: fg_vbat_est_check: vbat(-22),est-vbat(-22),diff(0),threshold(40000) [ 1.604385,0] FG: fg_vbat_est_check: vbat(-22),est-vbat(-22),diff(0),threshold(40000) [ 1.604564,0] FG: fg_vbat_est_check: vbat(-22),est-vbat(-22),diff(0),threshold(40000) [ 1.604618,0] ABOVps notification: event = 0 [ 1.604625,0] ABOVusb is not present [ 1.604630,0] ABOVps present state not change [ 1.607754,2] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent! [ 1.607810,2] ABOVps notification: event = 0 [ 1.607817,2] ABOVusb is not present [ 1.607822,2] ABOVps present state not change [ 1.608567,2] qpnp-smbcharger qpnp-smbcharger-17: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=0 [ 1.610499,0] unable to find DT imem DLOAD mode node [ 1.610976,0] unable to find DT imem EDLOAD mode node [ 1.613586,2] qpnp-smbcharger qpnp-smbcharger-17: Battery Temp State: Unknown -> Cool at -2C [ 1.613785,2] ABOVps notification: event = 0 [ 1.613792,2] ABOVusb is not present [ 1.613797,2] ABOVps present state not change [ 1.613994,1] thermal thermal_zone2: failed to read out thermal zone 2 [ 1.614195,1] thermal thermal_zone3: failed to read out thermal zone 3 [ 1.614390,1] thermal thermal_zone4: failed to read out thermal zone 4 [ 1.614582,1] thermal thermal_zone5: failed to read out thermal zone 5 [ 1.615101,1] qpnp_vadc_read: Error reading die_temp [ 1.637067,1] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com [ 1.637090,1] device-mapper: req-crypt: dm-req-crypt successfully initalized. [ 1.637090,1] [ 1.638028,1] sdhci: Secure Digital Host Controller Interface driver [ 1.638035,1] sdhci: Copyright(c) Pierre Ossman [ 1.638044,1] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.640490,2] qcom_ice_get_pdevice: found ice device c38a5cc0 [ 1.640500,2] qcom_ice_get_pdevice: matching platform device e45de600 [ 1.643535,2] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xc5b90000 [ 1.643885,2] sdhci_msm 7824900.sdhci: No vmmc regulator found [ 1.643894,2] sdhci_msm 7824900.sdhci: No vqmmc regulator found [ 1.644272,2] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in CMDQ mode [ 1.677351,2] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled [ 1.693008,1] sdhci_msm 7864900.sdhci: No vmmc regulator found [ 1.693020,1] sdhci_msm 7864900.sdhci: No vqmmc regulator found [ 1.693414,1] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA in legacy mode [ 1.712862,2] mmc0: Out-of-interrupt timeout is 100[ms] [ 1.712869,2] mmc0: BKOPS_EN equals 0x2 [ 1.712876,2] mmc0: eMMC FW version: 0x03 [ 1.712882,2] mmc0: CMDQ supported: depth: 16 [ 1.712887,2] mmc0: cache barrier support 0 flush policy 0 [ 1.718005,2] cmdq_host_alloc_tdl: desc_size: 512 data_sz: 126976 slot-sz: 16 [ 1.718199,2] mmc0: CMDQ enabled on card [ 1.718210,2] mmc0: new HS400 MMC card at address 0001 [ 1.718517,2] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=13 [ 1.718640,2] mmcblk0: mmc0:0001 FE62MB 14.5 GiB [ 1.718739,2] mmcblk0rpmb: mmc0:0001 FE62MB partition 3 4.00 MiB [ 1.720252,2] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 [ 1.725970,0] qcom,leds-atc leds-atc-20: atc_leds_probe success [ 1.726164,0] hidraw: raw HID events driver (C) Jiri Kosina [ 1.726550,3] tz_log 8600720.tz-log: Hyp log service is not supported [ 1.726946,0] usbcore: registered new interface driver usbhid [ 1.726953,0] usbhid: USB HID core driver [ 1.728027,2] ashmem: initialized [ 1.728503,2] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm [ 1.732331,2] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered. [ 1.734238,2] devfreq soc:qcom,cpubw: Couldn't update frequency transition information. [ 1.734412,2] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information. [ 1.736484,2] sensors-ssc soc:qcom,msm-ssc-sensors: msm_ssc_sensors_dt_parse: get qdsp timer cntpct hi offset fail [ 1.736498,2] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_init_sysfs: Could not parse dt [ 1.737011,2] usbcore: registered new interface driver snd-usb-audio [ 1.738100,2] tas2560 2-004c: tas2560_i2c_probe enter [ 1.738156,2] tas2560 2-004c: Looking up ti,irq-gpio property in node /soc/i2c@78b6000/tas2560@4c failed -2 [ 1.738166,2] tas2560 2-004c: Looking up ti,ear-switch-gpio property in node /soc/i2c@78b6000/tas2560@4c failed -2 [ 1.738176,2] tas2560 2-004c: Looking up ti,ear-switch-gpio2 property in node /soc/i2c@78b6000/tas2560@4c failed -2 [ 1.762059,2] tas2560 2-004c: tas2560_register_codec, enter [ 1.762146,2] tas2560 2-004c: tas2560_register_misc, leave [ 1.762185,3] TAS2560_ALGO:tas_calib_init [ 1.778240,2] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa [ 1.784468,2] TAS2560_ALGO:tas2560_algo_probe rx_port_id = 0x1016 tx_port_id = 0x1017 [ 1.784670,2] u32 classifier [ 1.784676,2] Actions configured [ 1.784710,2] Netfilter messages via NETLINK v0.30. [ 1.784760,2] nf_conntrack version 0.5.0 (13487 buckets, 53948 max) [ 1.785146,2] ctnetlink v0.93: registering with nfnetlink. [ 1.785767,2] xt_time: kernel timezone is -0000 [ 1.786077,2] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.786224,2] arp_tables: (C) 2002 David S. Miller [ 1.786264,2] TCP: cubic registered [ 1.786272,2] Initializing XFRM netlink socket [ 1.786619,2] NET: Registered protocol family 10 [ 1.787493,2] mip6: Mobile IPv6 [ 1.787520,2] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.787639,2] sit: IPv6 over IPv4 tunneling driver [ 1.788081,2] NET: Registered protocol family 17 [ 1.788103,2] NET: Registered protocol family 15 [ 1.788144,2] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.788166,2] Bridge firewalling registered [ 1.788176,2] Ebtables v2.0 registered [ 1.788297,2] Bluetooth: e5211ea8 [ 1.788309,2] Bluetooth: e5211ea8Bluetooth: e5211eb8 [ 1.788345,2] Bluetooth: e5211e90Bluetooth: e5211e90 [ 1.788360,2] Bluetooth: e5211e88Bluetooth: e5211ec8 [ 1.788378,2] Bluetooth: e5211ec8[ 1.788422,2] l2tp_core: L2TP core driver, V2.0 [ 1.788440,2] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 1.788449,2] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 1.788471,2] l2tp_netlink: L2TP netlink interface [ 1.788497,2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 1.788517,2] l2tp_debugfs: L2TP debugfs support [ 1.788527,2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 1.789323,2] NET: Registered protocol family 27 [ 1.795608,2] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped. [ 1.797237,2] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id. [ 1.797866,2] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped. [ 1.799377,0] ILITEK touch_driver_probe, lind = 85,*** touch_driver_probe *** [ 1.799544,0] ILITEK ms_drv_interface_touch_device_probe, lind = 16620,*** ms_drv_interface_touch_device_probe() *** [ 1.800726,2] msm_otg 78db000.usb: phy_reset: success [ 1.904559,2] ipa_get_transport_type:2302 IPA HW is not supported [ 1.905862,2] msm_otg 78db000.usb: USB in low power mode [ 1.916889,1] input: msg2856a as /devices/soc/78b7000.i2c/i2c-3/3-0026/input/input6 [ 1.942340,1] mmc1: Problem setting current limit! [ 1.945801,1] mmc1: new ultra high speed DDR50 SDHC card at address aaaa [ 1.946032,1] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=13 [ 1.946140,1] mmcblk1: mmc1:aaaa SL16G 14.8 GiB [ 1.948279,1] mmcblk1: p1 [ 2.066733,1] *** ILITEK ms_drv_interface_touch_device_probe() Major = 16, Minor = 20, g_fw_version = 00016.00020 *** [ 2.066742,1] ILITEK ms_drv_interface_touch_device_probe, lind = 16688,*** ILITEK/MStar touch driver registered *** [ 2.066780,1] ILITEK touch_driver_init, lind = 161,add ILITEK/MStar touch device driver i2c driver. [ 2.069073,1] Registering SWP/SWPB emulation handler [ 2.069460,1] registered taskstats version 1 [ 2.079034,2] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped. [ 2.081541,2] drv260x: drv260x_init success [ 2.082272,2] utags (utags_probe): Done [config] [ 2.082308,2] utags (utags_dt_init): backup storage path not provided [ 2.082513,1] utags (utags_probe): Done [hw] [ 2.083900,2] RNDIS_IPA module is loaded. [ 2.084609,1] file system registered [ 2.084674,1] mbim_init: initialize 1 instances [ 2.084741,1] mbim_init: Initialized 1 ports [ 2.086215,1] rndis_qc_init: initialize rndis QC instance [ 2.086437,1] Number of LUNs=8 [ 2.086446,1] Mass Storage Function, version: 2009/09/11 [ 2.086454,1] LUN: removable file: (no medium) [ 2.086467,1] Number of LUNs=1 [ 2.086517,1] LUN: removable file: (no medium) [ 2.086523,1] Number of LUNs=1 [ 2.087401,1] android_usb gadget: android_usb ready [ 2.087413,1] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32 [ 2.090453,1] msm_otg 78db000.usb: phy_reset: success [ 2.193828,1] msm_otg 78db000.usb: USB exited from low power mode [ 2.193855,1] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received [ 2.195208,1] msm_otg 78db000.usb: USB in low power mode [ 2.196038,1] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input7 [ 2.196615,1] i2c-core: driver [stmvl53l0] using legacy resume method [ 2.197501,1] qcom,qpnp-rtc qpnp-rtc-7: setting system clock to 1970-01-01 00:00:29 UTC (29) [ 2.203129,1] parse_cpu_levels: idx 1 594 [ 2.206159,1] qcom,qpnp-flash-led qpnp-flash-led-23: Unable to acquire pinctrl [ 2.212539,1] qcom,cc-debug-8952 1874000.qcom,cc-debug: Registered Debug Mux successfully [ 2.216919,1] msm8952-asoc-wcd c051000.sound: default codec configured [ 2.222026,1] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered [ 2.222087,1] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517) [ 2.223233,1] mem_acc_corner: disabling [ 2.223270,1] vdda_touch: disabling [ 2.223290,1] ibb_reg: disabling [ 2.225492,1] clock_late_init: Removing enables held for handed-off clocks [ 2.228435,1] ALSA device list: [ 2.228442,1] No soundcards found. [ 2.228524,1] Warning: unable to open an initial console. [ 2.228929,1] Freeing unused kernel memory: 500K [ 2.237315,1] SELinux: Permission module_load in class system not defined in policy. [ 2.237522,1] SELinux: Class netlink_iscsi_socket not defined in policy. [ 2.237537,1] SELinux: Class netlink_fib_lookup_socket not defined in policy. [ 2.237544,1] SELinux: Class netlink_connector_socket not defined in policy. [ 2.237550,1] SELinux: Class netlink_netfilter_socket not defined in policy. [ 2.237571,1] SELinux: Class netlink_generic_socket not defined in policy. [ 2.237578,1] SELinux: Class netlink_scsitransport_socket not defined in policy. [ 2.237584,1] SELinux: Class netlink_rdma_socket not defined in policy. [ 2.237590,1] SELinux: Class netlink_crypto_socket not defined in policy. [ 2.237622,1] SELinux: Permission audit_read in class capability2 not defined in policy. [ 2.237639,1] SELinux: Class can_socket not defined in policy. [ 2.237645,1] SELinux: the above unknown classes and permissions will be denied [ 2.278511,1] audit: type=1403 audit(29.576:2): policy loaded auid=4294967295 ses=4294967295 [ 2.296765,0] bcl_peripheral:bcl_poll_vbat_high Vbat reached high clear trip. vbat:4006080 [ 2.296839,0] bcl_peripheral:bcl_poll_ibat_low Invalid ibat state 1 [ 2.319946,1] init: /init.rc: 66: invalid command 'load_system_props' [ 2.320060,1] init: could not import file '/init.recovery.logd.rc' from '/init.rc' [ 2.320198,1] init: could not import file '/init.recovery.vold_decrypt.rc' from '/init.rc' [ 2.320221,1] init: could not import file '/init.recovery.qcom.rc' from '/init.rc' [ 2.667234,1] persistent_ram: persistent_ram_annotation_merge: discarded 72 [ 2.667252,1] pstore: Created annotate-ramoops [ 2.668074,1] enable_store: android_usb: already disabled [ 2.668457,1] init: Unable to open persistent property directory /data/property errno: 2 [ 2.668496,1] init: Unable to open persistent property directory /data/property errno: 2 [ 2.674101,0] read descriptors [ 2.674121,0] read strings [ 2.674534,3] audit: type=1400 audit(29.973:3): avc: denied { write } for uid=0 pid=340 comm="touch" name="sbin" dev="rootfs" ino=11480 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1 [ 2.674575,3] audit: type=1400 audit(29.973:4): avc: denied { add_name } for uid=0 pid=340 comm="touch" name="ld.config.txt" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1 [ 2.674610,3] audit: type=1400 audit(29.973:5): avc: denied { create } for uid=0 pid=340 comm="touch" name="ld.config.txt" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1 [ 2.674665,3] audit: type=1400 audit(29.973:6): avc: denied { write } for uid=0 pid=340 comm="touch" path="/sbin/ld.config.txt" dev="rootfs" ino=11814 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1 [ 2.678947,1] audit: type=1400 audit(29.976:7): avc: denied { write } for uid=0 pid=345 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1 [ 2.694029,1] avc: denied { set } for property=twrp.crash_counter scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service [ 2.716626,0] ILITEK 3-0026: *** ms_drvInterface_touch_device_fb_notifier_callback() TP Suspend *** [ 2.722991,1] ABOVRequest firmware failed - AbovCapSense (-11) [ 2.722994,1] ABOVcapsense_update_work: update firmware end [ 2.790198,0] ILITEK 3-0026: *** ms_drvInterface_touch_device_fb_notifier_callback() TP Resume *** [ 2.877985,0] mdss_dsi_on[0]+. [ 2.931185,3] input input7: gpio-keys report volume_up [0x73] type 0x1 state Off [ 2.931333,3] audit: type=1400 audit(30.230:8): avc: denied { create } for uid=0 pid=339 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1 [ 2.931929,3] audit: type=1400 audit(30.230:9): avc: denied { create } for uid=0 pid=339 comm="recovery" name="external_sd" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1 [ 3.070065,1] audit: type=1400 audit(30.366:10): avc: denied { getattr } for uid=0 pid=339 comm="recovery" path="/data/media" dev="mmcblk0p56" ino=6 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1 [ 3.253897,2] EXT4-fs (mmcblk0p54): mounted filesystem with ordered data mode. Opts: [ 3.254747,2] SELinux: Context u:object_r:cache_recovery_file:s0 is not valid (left unmapped). [ 3.262833,2] SELinux: Context u:object_r:bootchart_data_file:s0 is not valid (left unmapped). [ 3.263889,2] SELinux: Context u:object_r:recovery_data_file:s0 is not valid (left unmapped). [ 3.267665,2] SELinux: Context u:object_r:bluetooth_logs_data_file:s0 is not valid (left unmapped). [ 3.355501,2] SELinux: Context u:object_r:gatekeeper_data_file:s0 is not valid (left unmapped). [ 3.362440,2] SELinux: Context u:object_r:textclassifier_data_file:s0 is not valid (left unmapped). [ 3.372156,0] random: nonblocking pool is initialized [ 3.407184,2] SELinux: Context u:object_r:hostapd_socket:s0 is not valid (left unmapped). [ 3.412233,2] SELinux: Context u:object_r:perfprofd_data_file:s0 is not valid (left unmapped). [ 3.413026,2] SELinux: Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped). [ 3.413841,2] SELinux: Context u:object_r:vold_data_file:s0 is not valid (left unmapped). [ 3.414787,2] SELinux: Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped). [ 3.415189,2] SELinux: Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped). [ 3.415587,2] SELinux: Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped). [ 3.415979,2] SELinux: Context u:object_r:reboot_data_file:s0 is not valid (left unmapped). [ 3.416990,2] SELinux: Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped). [ 3.700785,2] SELinux: Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped). [ 3.702256,2] SELinux: Context u:object_r:data_qsee_file:s0 is not valid (left unmapped). [ 3.702652,2] SELinux: Context u:object_r:qvop-daemon_data_file:s0 is not valid (left unmapped). [ 3.703858,2] SELinux: Context u:object_r:fm_data_file:s0 is not valid (left unmapped). [ 3.704487,2] SELinux: Context u:object_r:dts_data_file:s0 is not valid (left unmapped). [ 3.704864,2] SELinux: Context u:object_r:sensorhub_data_file:s0 is not valid (left unmapped). [ 3.705254,2] SELinux: Context u:object_r:cutback_data_file:s0 is not valid (left unmapped). [ 3.705826,2] SELinux: Context u:object_r:cutback_socket:s0 is not valid (left unmapped). [ 3.706248,2] SELinux: Context u:object_r:fmradio_data_file:s0 is not valid (left unmapped). [ 3.706654,2] SELinux: Context u:object_r:iplog_data_file:s0 is not valid (left unmapped). [ 3.707479,2] SELinux: Context u:object_r:sds_data_file:s0 is not valid (left unmapped). [ 3.707863,2] SELinux: Context u:object_r:akmd_data_file:s0 is not valid (left unmapped). [ 3.708296,2] SELinux: Context u:object_r:bootstat_data_file:s0 is not valid (left unmapped). [ 3.711793,2] SELinux: Context u:object_r:magisk_file:s0 is not valid (left unmapped). [ 3.713805,2] SELinux: Context u:object_r:dbvc_data_file:s0 is not valid (left unmapped). [ 3.714199,2] SELinux: Context u:object_r:moodle_data_file:s0 is not valid (left unmapped). [ 3.715704,2] SELinux: Context u:object_r:qfp-daemon_data_file:s0 is not valid (left unmapped). [ 3.718513,2] SELinux: Context u:object_r:imager_data_file:s0 is not valid (left unmapped). [ 3.718909,2] SELinux: Context u:object_r:display_misc_file:s0 is not valid (left unmapped). [ 3.719320,2] SELinux: Context u:object_r:lm_data_file:s0 is not valid (left unmapped). [ 3.720110,2] SELinux: Context u:object_r:qdma_data_file:s0 is not valid (left unmapped). [ 3.720901,2] SELinux: Context u:object_r:data_qtee_file:s0 is not valid (left unmapped). [ 3.721279,2] SELinux: Context u:object_r:vendor_tombstone_data_file:s0 is not valid (left unmapped). [ 3.724622,3] SELinux: Context u:object_r:wifi_vendor_data_file:s0 is not valid (left unmapped). [ 3.725029,3] SELinux: Context u:object_r:wifi_vendor_wpa_socket:s0 is not valid (left unmapped). [ 3.725426,3] SELinux: Context u:object_r:wifi_vendor_hostapd_socket:s0 is not valid (left unmapped). [ 3.726572,3] SELinux: Context u:object_r:wigig_hostapd_socket:s0 is not valid (left unmapped). [ 3.726978,3] SELinux: Context u:object_r:port_bridge_data_file:s0 is not valid (left unmapped). [ 3.727383,3] SELinux: Context u:object_r:netmgrd_data_file:s0 is not valid (left unmapped). [ 3.728004,3] SELinux: Context u:object_r:ipa_vendor_data_file:s0 is not valid (left unmapped). [ 3.728447,3] SELinux: Context u:object_r:vendor_radio_data_file:s0 is not valid (left unmapped). [ 3.730878,2] SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped). [ 3.731650,2] SELinux: Context u:object_r:location_socket:s0 is not valid (left unmapped). [ 3.734334,2] SELinux: Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped). [ 3.734937,2] SELinux: Context u:object_r:iop_data_file:s0 is not valid (left unmapped). [ 3.735377,2] SELinux: Context u:object_r:vpp_data_file:s0 is not valid (left unmapped). [ 3.735769,2] SELinux: Context u:object_r:hbtp_log_file:s0 is not valid (left unmapped). [ 3.736200,2] SELinux: Context u:object_r:vendor_camera_data_file:s0 is not valid (left unmapped). [ 3.737283,2] SELinux: Context u:object_r:bugreport_data_file:s0 is not valid (left unmapped). [ 3.737698,2] SELinux: Context u:object_r:aplog_data_file:s0 is not valid (left unmapped). [ 3.813838,1] SELinux: Context u:object_r:log_app_data_file:s0 is not valid (left unmapped). [ 5.093470,3] FG: fg_get_mmi_battid: Battsn unused [ 5.093490,3] qcom,qpnp-fg qpnp-fg-18: No Default Serial Number defined [ 5.093500,3] qcom,qpnp-fg qpnp-fg-18: No Battery Match Found! [ 5.093516,3] of_batterydata_get_best_profile: je30-atl_2120mah found [ 5.098274,3] FG: fg_batt_profile_init: Battery profile not same, clearing data [ 5.098970,3] FG: fg_batt_profile_init: profiles differ [ 5.098979,3] FG: fg_do_restart: restarting fuel gauge... [ 6.341273,2] audit_printk_skb: 255 callbacks suppressed [ 6.341288,2] audit: type=1400 audit(33.640:96): avc: denied { getattr } for uid=0 pid=339 comm="recovery" path="/data/data/com.android.bluetooth/lib" dev="mmcblk0p56" ino=92511 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=lnk_file permissive=1 [ 7.252730,2] audit: type=1400 audit(34.550:97): avc: denied { getattr } for uid=0 pid=339 comm="recovery" path="/data/data/com.opera.mini.native/files/turboproxy" dev="mmcblk0p56" ino=6133 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=sock_file permissive=1 [ 7.668753,2] audit: type=1400 audit(34.966:98): avc: denied { getattr } for uid=0 pid=339 comm="recovery" path="/data/data/ru.LlDcMVoM.fQRSTalWE/files/base.odex" dev="mmcblk0p56" ino=74302 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1 [ 7.684870,2] audit: type=1400 audit(34.983:99): avc: denied { read } for uid=0 pid=339 comm="recovery" name="lp" dev="mmcblk0p56" ino=7414 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1 [ 7.684906,2] audit: type=1400 audit(34.983:100): avc: denied { open } for uid=0 pid=339 comm="recovery" path="/data/data/ru.LlDcMVoM.fQRSTalWE/lp" dev="mmcblk0p56" ino=7414 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1 [ 7.710138,2] audit: type=1400 audit(35.010:101): avc: denied { getattr } for uid=0 pid=339 comm="recovery" path="/data/data/com.xaedtejtkccjewa/files/GG-3ZWI/i" dev="mmcblk0p56" ino=44101 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0 tclass=fifo_file permissive=1 [ 7.710718,2] audit: type=1400 audit(35.010:102): avc: denied { getattr } for uid=0 pid=339 comm="recovery" path="/data/data/com.xaedtejtkccjewa/files/GG-3ZWI/gr" dev="mmcblk0p56" ino=15804 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0 tclass=file permissive=1 [ 7.773594,3] FG: fg_do_restart: done! [ 7.777332,3] FG: populate_system_data: cutoff_voltage = 3399943, nom_cap_uah = 2130000 p1p2 = 49, p2p3 = 7 [ 7.777392,3] FG: fg_batt_profile_init: Battery SOC: 61, V: 3899513uV [ 7.777430,3] FG: fg_vbat_est_check: vbat(3899513),est-vbat(3887916),diff(11597),threshold(40000) [ 7.779449,3] FG: update_esr_value: ESR: update esr from 0x68005a6661c34a67 to 0x58cd4a6761c34a67 [ 15.497221,2] audit: type=1400 audit(42.796:103): avc: denied { getattr } for uid=0 pid=339 comm="recovery" path="/data/data/com.motorola.storageoptimizer" dev="mmcblk0p56" ino=722 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0 tclass=dir permissive=1 [ 15.497270,2] audit: type=1400 audit(42.796:104): avc: denied { read } for uid=0 pid=339 comm="recovery" name="com.motorola.storageoptimizer" dev="mmcblk0p56" ino=722 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0 tclass=dir permissive=1 [ 15.497298,2] audit: type=1400 audit(42.796:105): avc: denied { open } for uid=0 pid=339 comm="recovery" path="/data/data/com.motorola.storageoptimizer" dev="mmcblk0p56" ino=722 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0 tclass=dir permissive=1 [ 15.518219,1] audit: type=1400 audit(42.816:106): avc: denied { getattr } for uid=0 pid=339 comm="recovery" path="/data/data/com.qualcomm.timeservice" dev="mmcblk0p56" ino=1941 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c101,c256,c512,c768 tclass=dir permissive=1 [ 15.518272,1] audit: type=1400 audit(42.816:107): avc: denied { read } for uid=0 pid=339 comm="recovery" name="com.qualcomm.timeservice" dev="mmcblk0p56" ino=1941 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c101,c256,c512,c768 tclass=dir permissive=1 [ 15.518303,1] audit: type=1400 audit(42.816:108): avc: denied { open } for uid=0 pid=339 comm="recovery" path="/data/data/com.qualcomm.timeservice" dev="mmcblk0p56" ino=1941 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c101,c256,c512,c768 tclass=dir permissive=1 [ 21.139715,2] audit: type=1400 audit(48.436:109): avc: denied { getattr } for uid=0 pid=339 comm="recovery" path="/data/app-private" dev="mmcblk0p56" ino=52 scontext=u:r:recovery:s0 tcontext=u:object_r:apk_private_data_file:s0 tclass=dir permissive=1 [ 21.139770,2] audit: type=1400 audit(48.436:110): avc: denied { read } for uid=0 pid=339 comm="recovery" name="app-private" dev="mmcblk0p56" ino=52 scontext=u:r:recovery:s0 tcontext=u:object_r:apk_private_data_file:s0 tclass=dir permissive=1 [ 21.139797,2] audit: type=1400 audit(48.436:111): avc: denied { open } for uid=0 pid=339 comm="recovery" path="/data/app-private" dev="mmcblk0p56" ino=52 scontext=u:r:recovery:s0 tcontext=u:object_r:apk_private_data_file:s0 tclass=dir permissive=1 [ 21.140680,2] audit: type=1400 audit(48.440:112): avc: denied { getattr } for uid=0 pid=339 comm="recovery" path="/data/app-asec" dev="mmcblk0p56" ino=54 scontext=u:r:recovery:s0 tcontext=u:object_r:asec_image_file:s0 tclass=dir permissive=1 [ 21.140717,2] audit: type=1400 audit(48.440:113): avc: denied { read } for uid=0 pid=339 comm="recovery" name="app-asec" dev="mmcblk0p56" ino=54 scontext=u:r:recovery:s0 tcontext=u:object_r:asec_image_file:s0 tclass=dir permissive=1 [ 21.140744,2] audit: type=1400 audit(48.440:114): avc: denied { open } for uid=0 pid=339 comm="recovery" path="/data/app-asec" dev="mmcblk0p56" ino=54 scontext=u:r:recovery:s0 tcontext=u:object_r:asec_image_file:s0 tclass=dir permissive=1 [ 21.141493,2] audit: type=1400 audit(48.440:115): avc: denied { read } for uid=0 pid=339 comm="recovery" name="app-lib2" dev="mmcblk0p56" ino=56 scontext=u:r:recovery:s0 tcontext=u:object_r:apk_data_file:s0 tclass=dir permissive=1 [ 21.141521,2] audit: type=1400 audit(48.440:116): avc: denied { open } for uid=0 pid=339 comm="recovery" path="/data/app-lib2" dev="mmcblk0p56" ino=56 scontext=u:r:recovery:s0 tcontext=u:object_r:apk_data_file:s0 tclass=dir permissive=1 [ 21.143426,2] audit: type=1400 audit(48.443:117): avc: denied { read } for uid=0 pid=339 comm="recovery" name="oat" dev="mmcblk0p56" ino=46509 scontext=u:r:recovery:s0 tcontext=u:object_r:dalvikcache_data_file:s0 tclass=dir permissive=1 [ 21.143458,2] audit: type=1400 audit(48.443:118): avc: denied { open } for uid=0 pid=339 comm="recovery" path="/data/app/ru.kaomoji.kaomojiapp-HHHxjOy0tWGLlUyhoJmhSg==/oat" dev="mmcblk0p56" ino=46509 scontext=u:r:recovery:s0 tcontext=u:object_r:dalvikcache_data_file:s0 tclass=dir permissive=1 [ 21.491647,2] SELinux: Context u:object_r:ota_data_file:s0 is not valid (left unmapped). [ 21.492119,2] SELinux: Context u:object_r:ota_package_file:s0 is not valid (left unmapped). [ 21.500768,2] SELinux: Context u:object_r:heapdump_data_file:s0 is not valid (left unmapped). [ 21.503644,2] SELinux: Context u:object_r:fingerprintd_data_file:s0 is not valid (left unmapped). [ 21.506259,2] SELinux: Context u:object_r:icon_file:s0 is not valid (left unmapped). [ 21.507810,2] SELinux: Context u:object_r:swap_data_file:s0 is not valid (left unmapped). [ 21.508258,2] SELinux: Context u:object_r:dropbox_data_file:s0 is not valid (left unmapped). [ 22.380561,2] SELinux: Context u:object_r:ringtone_file:s0 is not valid (left unmapped). [ 22.395666,2] SELinux: Context u:object_r:shortcut_manager_icons:s0 is not valid (left unmapped). [ 24.087896,1] SELinux: Context u:object_r:cache_private_backup_file:s0 is not valid (left unmapped). [ 24.370176,1] SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped). [ 24.409594,1] SELinux: Context u:object_r:dpmd_data_file:s0 is not valid (left unmapped). [ 24.411717,1] SELinux: Context u:object_r:hostapd_data_file:s0 is not valid (left unmapped). [ 24.412231,1] SELinux: Context u:object_r:time_data_file:s0 is not valid (left unmapped). [ 24.443781,0] SELinux: Context u:object_r:mmi_data_file:s0 is not valid (left unmapped). [ 24.444898,0] SELinux: Context u:object_r:panic_data_file:s0 is not valid (left unmapped). [ 24.446334,0] SELinux: Context u:object_r:wapi_supplicant_data_file:s0 is not valid (left unmapped). [ 24.446895,0] SELinux: Context u:object_r:greybus_fw_data_file:s0 is not valid (left unmapped). [ 24.447468,0] SELinux: Context u:object_r:power_log_file:s0 is not valid (left unmapped). [ 24.448022,0] SELinux: Context u:object_r:ramdump_data_file:s0 is not valid (left unmapped). [ 24.449811,0] SELinux: Context u:object_r:bt_ramdump_data_file:s0 is not valid (left unmapped). [ 24.450369,0] SELinux: Context u:object_r:fpc_data_file:s0 is not valid (left unmapped). [ 24.450900,0] SELinux: Context u:object_r:fps_data_file:s0 is not valid (left unmapped). [ 24.451547,0] SELinux: Context u:object_r:hwrev_data_file:s0 is not valid (left unmapped). [ 24.453713,1] SELinux: Context u:object_r:adspd_data_file:s0 is not valid (left unmapped). [ 24.454203,1] SELinux: Context u:object_r:camera_dump_data_file:s0 is not valid (left unmapped). [ 24.454688,1] SELinux: Context u:object_r:misc_ne_data_file:s0 is not valid (left unmapped). [ 24.455162,1] SELinux: Context u:object_r:mdlog_data_file:s0 is not valid (left unmapped). [ 24.457574,1] SELinux: Context u:object_r:setupshutdown_data_file:s0 is not valid (left unmapped). [ 24.458607,1] SELinux: Context u:object_r:chargeonly_data_file:s0 is not valid (left unmapped). [ 24.479318,1] EXT4-fs (mmcblk0p55): mounted filesystem with ordered data mode. Opts: [ 24.720585,3] mmc1: Problem setting current limit! [ 24.737773,1] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 26.902827,2] audit_printk_skb: 117 callbacks suppressed [ 26.902842,2] audit: type=1400 audit(54.200:158): avc: denied { read } for uid=0 pid=339 comm="recovery" name=".twrps" dev="mmcblk0p56" ino=89207 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1 [ 26.902876,2] audit: type=1400 audit(54.200:159): avc: denied { open } for uid=0 pid=339 comm="recovery" path="/data/media/0/TWRP/.twrps" dev="mmcblk0p56" ino=89207 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1 [ 26.964992,2] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 27.073333,2] audit: type=1400 audit(54.370:160): avc: denied { sys_time } for uid=0 pid=339 comm="recovery" capability=25 scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=capability permissive=1 [ 27.074404,1] avc: denied { set } for property=sys.usb.config scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service [ 27.074517,1] msm_otg 78db000.usb: ep_dequeue: Unable to dequeue while in LPM [ 27.074797,1] enable_store: 1 callbacks suppressed [ 27.074807,1] enable_store: android_usb: already disabled [ 27.074903,1] mtp_bind_config [ 27.123633,1] EXT4-fs (mmcblk0p55): mounted filesystem with ordered data mode. Opts: [ 27.124697,0] audit: type=1400 audit(1644236765.686:161): avc: denied { create } for uid=0 pid=339 comm="recovery" name="twadbfifo" scontext=u:r:recovery:s0 tcontext=u:object_r:tmpfs:s0 tclass=fifo_file permissive=1 [ 27.124759,0] audit: type=1400 audit(1644236765.686:162): avc: denied { read } for uid=0 pid=339 comm="recovery" name="twadbfifo" dev="tmpfs" ino=894 scontext=u:r:recovery:s0 tcontext=u:object_r:tmpfs:s0 tclass=fifo_file permissive=1 [ 27.124789,0] audit: type=1400 audit(1644236765.686:163): avc: denied { open } for uid=0 pid=339 comm="recovery" path="/tmp/twadbfifo" dev="tmpfs" ino=894 scontext=u:r:recovery:s0 tcontext=u:object_r:tmpfs:s0 tclass=fifo_file permissive=1 [ 27.125024,1] audit: type=1400 audit(1644236765.686:164): avc: denied { create } for uid=0 pid=339 comm="recovery" name="orsin" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1 [ 27.125094,1] audit: type=1400 audit(1644236765.686:165): avc: denied { read } for uid=0 pid=339 comm="recovery" name="orsin" dev="rootfs" ino=12349 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1 [ 27.125121,1] audit: type=1400 audit(1644236765.686:166): avc: denied { open } for uid=0 pid=339 comm="recovery" path="/sbin/orsin" dev="rootfs" ino=12349 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1 [ 27.876219,3] audit: type=1400 audit(1644236766.439:167): avc: denied { read write } for uid=0 pid=368 comm="recovery" name="mtp_usb" dev="tmpfs" ino=788 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1 [ 27.876262,3] mtp_open [ 41.338222,0] audit_printk_skb: 12 callbacks suppressed [ 41.338237,0] audit: type=1400 audit(1644236779.899:172): avc: denied { read } for uid=0 pid=339 comm="recovery" name="/" dev="pstore" ino=12312 scontext=u:r:recovery:s0 tcontext=u:object_r:pstorefs:s0 tclass=dir permissive=1 [ 41.338268,0] audit: type=1400 audit(1644236779.899:173): avc: denied { open } for uid=0 pid=339 comm="recovery" path="/sys/fs/pstore" dev="pstore" ino=12312 scontext=u:r:recovery:s0 tcontext=u:object_r:pstorefs:s0 tclass=dir permissive=1 [ 41.338324,0] audit: type=1400 audit(1644236779.899:174): avc: denied { search } for uid=0 pid=339 comm="recovery" name="/" dev="pstore" ino=12312 scontext=u:r:recovery:s0 tcontext=u:object_r:pstorefs:s0 tclass=dir permissive=1 [ 41.338380,0] audit: type=1400 audit(1644236779.899:175): avc: denied { getattr } for uid=0 pid=339 comm="recovery" path="/sys/fs/pstore/annotate-ramoops-0" dev="pstore" ino=12313 scontext=u:r:recovery:s0 tcontext=u:object_r:pstorefs:s0 tclass=file permissive=1 [ 59.934047,0] audit: type=1400 audit(1644236798.496:176): avc: denied { read } for uid=0 pid=378 comm="cp" name="annotate-ramoops-0" dev="pstore" ino=12313 scontext=u:r:recovery:s0 tcontext=u:object_r:pstorefs:s0 tclass=file permissive=1 [ 59.934086,0] audit: type=1400 audit(1644236798.496:177): avc: denied { open } for uid=0 pid=378 comm="cp" path="/sys/fs/pstore/annotate-ramoops-0" dev="pstore" ino=12313 scontext=u:r:recovery:s0 tcontext=u:object_r:pstorefs:s0 tclass=file permissive=1 [ 59.934127,0] audit: type=1400 audit(1644236798.496:178): avc: denied { write } for uid=0 pid=378 comm="cp" name="0" dev="mmcblk0p56" ino=2416 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1 [ 59.934153,0] audit: type=1400 audit(1644236798.496:179): avc: denied { add_name } for uid=0 pid=378 comm="cp" name="annotate-ramoops-0" scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1 [ 59.934206,0] audit: type=1400 audit(1644236798.496:180): avc: denied { create } for uid=0 pid=378 comm="cp" name="annotate-ramoops-0" scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1 [ 59.934352,0] audit: type=1400 audit(1644236798.496:181): avc: denied { write } for uid=0 pid=378 comm="cp" path="/sdcard/annotate-ramoops-0" dev="mmcblk0p56" ino=26584 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1 [ 61.713126,2] qpnp-smbcharger qpnp-smbcharger-17: Battery Temp State: Cool -> Good at 35C [ 61.741675,3] audit: type=1400 audit(1644236800.302:182): avc: denied { read } for uid=0 pid=339 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=netlink_kobject_uevent_socket permissive=1 [ 90.257209,3] mmc1: Problem setting current limit! [ 111.601424,1] EXT4-fs (mmcblk0p55): warning: maximal mount count reached, running e2fsck is recommended [ 111.601772,1] EXT4-fs (mmcblk0p55): mounted filesystem with ordered data mode. Opts: [ 111.653726,1] audit: type=1400 audit(1644236850.216:183): avc: denied { relabelfrom } for uid=0 pid=339 comm="recovery" name=".twrps" dev="mmcblk0p56" ino=89207 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1 [ 111.653787,1] audit: type=1400 audit(1644236850.216:184): avc: denied { relabelto } for uid=0 pid=339 comm="recovery" name=".twrps" dev="mmcblk0p56" ino=89207 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1 [ 111.653851,1] audit: type=1400 audit(1644236850.216:185): avc: denied { setattr } for uid=0 pid=339 comm="recovery" name=".twrps" dev="mmcblk0p56" ino=89207 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1 [ 113.068478,1] SysRq : Emergency Remount R/O [ 113.074737,0] EXT4-fs (mmcblk0p54): re-mounted. Opts: (null) [ 113.311592,0] Emergency Remount complete [ 113.370117,1] msm_thermal:msm_thermal_update_freq Freq mitigation task is not initialized [ 113.371861,1] mdss_fb_release_all: try to close unopened fb 1! from pid:1 name:init [ 113.371962,1] mdss_mdp_overlay_release: Unable to unset pipe(s) ndx=0x10 unset=0x0 [ 113.377672,1] mdss_dsi_panel_off[0]+. [ 113.733398,1] mdss_dsi_off[0]+. [ 113.856307,1] ILITEK 3-0026: *** ms_drvInterface_touch_device_fb_notifier_callback() TP Suspend *** [ 113.930726,1] Current shipmode info is 0x88e = 0x91 [ 113.930765,1] Write shipmode info to 0x88e with 0x1 [ 113.930808,1] qcom,qpnp-rtc qpnp-rtc-7: Shipmode current time 141 secs [ 113.930816,1] qcom,qpnp-rtc qpnp-rtc-7: Setup Shipmode trigger 2592141 secs [ 113.931138,0] reboot: Restarting system with command '' [ 113.931150,0] Current task:init(1) Parent task:swapper/0(0) [ 113.931168,0] Going down for restart now [ 113.931767,0] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2: configuring PON for reset ```

[kyaros]

sorry if it's too long, i can't upload the txt file

[yujincheng08]

zip and update txt

[kyaros]

I can't upload zip files either

[yujincheng08]

[kyaros]

finally, im so sorry for any trouble i caused

console-ramoops.zip

[yujincheng08]

This log has nothing about magisk. You should flash Magisk 24102 first, and let it bootloop for a while and restore to maigsk 23 and get the ramoops.

[illgetit87]

Hey, I downloaded your patch file and wondering if the magisk log is correct . Sorry I can't seem to upload a magis-log report and also not sure how to get a logcat debug report via terminal emulator on my moto g pure. Some guidance and support would be greatly appreciated. Thanks James