MagiskBot
commented
4 days ago Invalid bug report, automatically closed. Please report issues using the latest debug Magisk build (version code: 27008).
Closed LegacyFreeman closed 4 days ago
MagiskBot
commented
4 days ago Invalid bug report, automatically closed. Please report issues using the latest debug Magisk build (version code: 27008).
LegacyFreeman
commented
4 days ago updated the apk, flashed it through it - the system does not start, flashed the stock boot.img through it, installed it through recovery - does not start! Rolled back to version 27007 - everything works properly.
LegacyFreeman
commented
4 days ago [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.236-SD665-Fury (jsx@igloo) (gcc version 11.1.0 (MoonBase-Android-ToolChain 11.1.0 p1)) #1 |MoonBase|\xe2\x84\xa2 SMP PREEMPT Sat Jun 12 19:34:08 -00 2021 [ 0.000000] Boot CPU: AArch64 Processor [51af8014] [ 0.000000] Machine: Qualcomm Technologies, Inc. trinket pm6125 + pmi632 IDP [ 0.000000] mem-offline: no memory to offline for DDR size:4258267136 [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7000000, size 140 MiB [ 0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f6800000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f4800000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3800000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000013fc00000, size 4 MiB [ 0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3400000, size 4 MiB [ 0.000000] OF: reserved mem: initialized node sdsp_region, compatible id shared-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000045700000, size 6 MiB [ 0.000000] OF: reserved mem: initialized node hyp_region@45700000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000045e00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node xbl_aop_mem@45e00000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000045fff000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node sec_apps_region@45fff000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000046000000, size 2 MiB [ 0.000000] OF: reserved mem: initialized node smem@46000000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000046200000, size 45 MiB [ 0.000000] OF: reserved mem: initialized node removed_region@46200000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x000000004b000000, size 126 MiB [ 0.000000] OF: reserved mem: initialized node modem_region@4b000000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000052e00000, size 5 MiB [ 0.000000] OF: reserved mem: initialized node pil_video_region@52e00000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000053300000, size 2 MiB [ 0.000000] OF: reserved mem: initialized node wlan_msa_region@53300000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000053500000, size 30 MiB [ 0.000000] OF: reserved mem: initialized node cdsp_regions@53500000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000055300000, size 34 MiB [ 0.000000] OF: reserved mem: initialized node pil_adsp_region@55300000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000057500000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ips_fw_region@57100000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000057510000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ipa_gsi_region@57110000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000057515000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node gpu_region@57115000, compatible id removed-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000005e400000, size 20 MiB [ 0.000000] OF: reserved mem: initialized node qseecom_region@5e400000, compatible id shared-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x000000005f800000, size 30 MiB [ 0.000000] OF: reserved mem: initialized node cdsp_sec_regions@5f800000, compatible id removed-dma-pool [ 0.000000] On node 0 totalpages: 962472 [ 0.000000] DMA zone: 10943 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 700328 pages, LIFO batch:63 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 21 pages/cpu s54552 r0 d31464 u86016 [ 0.000000] pcpu-alloc: s54552 r0 d31464 u86016 alloc=21*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] CPU features: enabling workaround for Kryo2xx Silver erratum 845719 [ 0.000000] SSBD disabled by kernel configuration [ 0.000000] Speculative Store Bypass Disable disabled from command-line [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 947433 [ 0.000000] Kernel command line: audit=0 mitigations=off coresight_cpu_debug.enable=0 debug=0 nowatchdog nmi_watchdog=0 no_debug_objects dyndbg=0 module.dyndbg=0 quiet noirqdebug rcu_nocbs=0-7 console=ttyMSM0,115200n8 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 swiotlb=1 earlycon=msm_geni_serial,0x4a90000 loop.max_part=7 cgroup.memory=nokmem,nosocket androidboot.selinux=permissive androidboot.usbconfigfs=true buildvariant=eng androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.vbmeta.device=PARTUUID=db4396fa-7d45-87b5-28c3-084903a3edcd androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=unlocked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=2432 androidboot.vbmeta.digest=ce24c9982a062fb0a977faf5ce147f80a471ae01edcc37b5f9500771042c01e8 androidboot.vbmeta.invalidate_on_error=yes androidboot.veritym [ 0.000000] IRQ lockup detection disabled [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes [ 0.000000] log_buf_len min size: 131072 bytes [ 0.000000] log_buf_len: 1048576 bytes [ 0.000000] early log buf free: 124020(94%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB: mapped [mem 0xfffbf000-0xfffff000] (0MB) [ 0.000000] Memory: 3468568K/3849888K available (19966K kernel code, 2092K rwdata, 5944K rodata, 2048K init, 2657K bss, 172424K reserved, 208896K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: \x09RCU event tracing is enabled. [ 0.000000] rcu: \x09RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] \x09Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f300000 [ 0.000000] rcu: \x09Offload RCU callbacks from CPUs: 0-7. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000014] clocksource: Switched to clocksource arch_sys_counter [ 0.002367] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.002380] pid_max: default: 32768 minimum: 301 [ 0.002443] Security Framework initialized [ 0.002448] SELinux: Initializing. [ 0.002488] SELinux: Starting in permissive mode [ 0.002518] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002530] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.008548] ASID allocator initialised with 65536 entries [ 0.008593] NOHZ: local_softirq_pending 02 [ 0.010615] rcu: Hierarchical SRCU implementation. [ 0.016200] MSM Memory Dump base table set up [ 0.016214] MSM Memory Dump apps data table set up [ 0.016544] smp: Bringing up secondary CPUs ... [ 0.026584] GICv3: CPU1: found redistributor 1 region 0:0x000000000f320000 [ 0.036474] GICv3: CPU2: found redistributor 2 region 0:0x000000000f340000 [ 0.046307] GICv3: CPU3: found redistributor 3 region 0:0x000000000f360000 [ 0.057137] CPU features: enabling workaround for ARM erratum 858921 [ 0.057172] spectrev2 mitigation disabled by kernel configuration [ 0.057229] CPU features: Unsupported CPU feature variation detected. [ 0.057264] GICv3: CPU4: found redistributor 100 region 0:0x000000000f380000 [ 0.057658] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.057685] arch_timer: CPU4: Trapping CNTVCT access [ 0.067760] GICv3: CPU5: found redistributor 101 region 0:0x000000000f3a0000 [ 0.067798] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.067821] arch_timer: CPU5: Trapping CNTVCT access [ 0.077911] GICv3: CPU6: found redistributor 102 region 0:0x000000000f3c0000 [ 0.077949] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.077973] arch_timer: CPU6: Trapping CNTVCT access [ 0.088035] GICv3: CPU7: found redistributor 103 region 0:0x000000000f3e0000 [ 0.088073] arch_timer: Enabling local workaround for ARM erratum 858921 [ 0.088097] arch_timer: CPU7: Trapping CNTVCT access [ 0.088255] smp: Brought up 1 node, 8 CPUs [ 0.088262] SMP: Total of 8 processors activated. [ 0.088266] CPU features: detected: GIC system register CPU interface [ 0.088269] CPU features: detected: 32-bit EL0 Support [ 0.088619] CPU: All CPU(s) started at EL1 [ 0.088669] alternatives: patching kernel code [ 0.089011] scm_enable_mem_protection: SCM call failed [ 0.127121] random: get_random_bytes called from setup_net+0x38/0x2e0 with crng_init=1 [ 0.127690] Registered cp15_barrier emulation handler [ 0.127705] Registered setend emulation handler [ 0.127859] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.127870] futex hash table entries: 2048 (order: 6, 262144 bytes) [ 0.132754] pinctrl core: initialized pinctrl subsystem [ 0.133268] NET: Registered protocol family 16 [ 0.134522] schedtune: configured to support 6 boost groups [ 0.135977] cpuidle: using governor teo [ 0.135992] cpuidle: using governor qcom [ 0.136099] NET: Registered protocol family 42 [ 0.140273] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval)) [ 0.140281] vdso32: 2 pages (1 code @ (ptrval), 1 data @ (ptrval)) [ 0.140293] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.141165] DMA: preallocated 256 KiB pool for atomic allocations [ 0.143679] exit: IPA_USB init success! [ 0.147567] pstore: using zlib compression [ 0.147603] console [pstore-1] enabled [ 0.147652] pstore: Registered ramoops as persistent store backend [ 0.147656] ramoops: attached 0x400000@0x61600000, ecc: 0/0 [ 0.151450] unable to find DT imem DLOAD mode node [ 0.153099] unable to find DT imem EDLOAD mode node [ 0.157133] platform 6080000.qcom,mss: assigned reserved memory node modem_region@4b000000 [ 0.157397] msm_watchdog f017000.qcom,wdt: wdog absent resource not present [ 0.157627] msm_watchdog f017000.qcom,wdt: MSM Watchdog Initialized [ 0.157923] sps:sps is ready. [ 0.158566] platform ab00000.qcom,lpass: assigned reserved memory node pil_adsp_region@55300000 [ 0.158687] platform b300000.qcom,turing: assigned reserved memory node cdsp_regions@53500000 [ 0.158811] platform soc:mem_dump: assigned reserved memory node mem_dump_region [ 0.159975] platform soc:qcom,smem: assigned reserved memory node smem@46000000 [ 0.160352] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region [ 0.160638] qcom_glink_rpm soc:rpm-glink: failed to register early notif -22 [ 0.160951] msm_glink soc:qcom,glink: [probe_subsystem]: no qcom,glink-label for wdsp [ 0.161410] platform 46d00000.qseecom: assigned reserved memory node qseecom_region@5e400000 [ 0.162705] (NULL device *): msm_gsi_probe:4551 failed to create IPC log, continue... [ 0.163151] platform soc:qcom,ipa_fws: assigned reserved memory node ips_fw_region@57100000 [ 0.163226] platform 5ae0000.qcom,venus: assigned reserved memory node pil_video_region@52e00000 [ 0.164182] spmi spmi-0: PMIC arbiter version v5 (0x50010000) [ 0.164487] qcom_smd_rpm_probe: RPM-SMD running version 0 [ 0.167472] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517 [ 0.170508] trinket-pinctrl 400000.pinctrl: invalid resource [ 0.206932] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu0 [ 0.207104] clk: add_opp: Set OPP pair (1804800000 Hz, 920000 uv) on cpu0 [ 0.207142] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu1 [ 0.207307] clk: add_opp: Set OPP pair (1804800000 Hz, 920000 uv) on cpu1 [ 0.207341] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu2 [ 0.207513] clk: add_opp: Set OPP pair (1804800000 Hz, 920000 uv) on cpu2 [ 0.207549] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu3 [ 0.207711] clk: add_opp: Set OPP pair (1804800000 Hz, 920000 uv) on cpu3 [ 0.207750] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu4 [ 0.207917] clk: add_opp: Set OPP pair (2016000000 Hz, 944000 uv) on cpu4 [ 0.207954] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu5 [ 0.208166] clk: add_opp: Set OPP pair (2016000000 Hz, 944000 uv) on cpu5 [ 0.208203] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu6 [ 0.208371] clk: add_opp: Set OPP pair (2016000000 Hz, 944000 uv) on cpu6 [ 0.208425] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu7 [ 0.208574] clk: add_opp: Set OPP pair (2016000000 Hz, 944000 uv) on cpu7 [ 0.209068] sched-energy: Sched-energy-costs installed from DT [ 0.209138] cpufreq: driver osm-cpufreq up and running [ 0.209141] clk: clk_cpu_osm_driver_probe: OSM CPUFreq driver inited [ 0.212916] KPI: Bootloader start count = 55797 [ 0.212920] KPI: Bootloader end count = 102815 [ 0.212922] KPI: Bootloader display count = 309514904 [ 0.212924] KPI: Bootloader load kernel count = 2090898105 [ 0.212927] KPI: Kernel MPM timestamp = 116472 [ 0.212928] KPI: Kernel MPM Clock frequency = 32768 [ 0.212943] socinfo_print: v0.15, id=394, ver=1.0, raw_id=266, raw_ver=0, hw_plat=34, hw_plat_ver=65536\x0a accessory_chip=0, hw_plat_subtype=0, pmic_model=65581, pmic_die_revision=65537 foundry_id=3 serial_number=3409115788 num_pmics=2 chip_family=0x64 raw_device_family=0x9 raw_device_number=0x1 nproduct_id=0x411 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0xc ndefective_parts_array_offset=0xb4 nmodem_supported=0xff [ 0.212991] Minidump: Enabled with max number of regions 200 [ 0.213027] Failed to setup PIL ipc logging [ 0.213340] mem-offline: System booted with no zone movable memory blocks. Cannot perform memory offlining [ 0.214622] arm-smmu 59a0000.kgsl-smmu: Couldn't get clock: gcc_gpu_memnoc_gfx_clk [ 0.215057] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.215060] arm-smmu c600000.apps-smmu: Bus client registration failed [ 0.215294] vgaarb: loaded [ 0.215488] qcom,qpnp-misc 1c40000.qcom,spmi:qcom,pm6125@0:qcom,misc@900: probe successful [ 0.215822] SCSI subsystem initialized [ 0.215883] usbcore: registered new interface driver usbfs [ 0.215895] usbcore: registered new interface driver hub [ 0.215914] usbcore: registered new device driver usb [ 0.216183] usb_phy_generic soc:usb_nop_phy: soc:usb_nop_phy supply vcc not found, using dummy regulator [ 0.216582] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pmi632@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from CBL (External Power Supply) and 'warm' boot [ 0.216603] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pmi632@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from SOFT (Software) [ 0.216742] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pm6125@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot [ 0.216763] qcom,qpnp-power-on 1c40000.qcom,spmi:qcom,pm6125@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM Controlled Shutdown) [ 0.216912] input: qpnp_pon as /devices/platform/soc/1c40000.qcom,spmi/spmi-0/spmi0-00/1c40000.qcom,spmi:qcom,pm6125@0:qcom,power-on@800/input/input0 [ 0.217838] media: Linux media interface: v0.10 [ 0.217848] Linux video capture interface: v2.00 [ 0.220958] tsens_tm_probe : unable to create IPC Logging 0 for tsens 0x0000000004411000 [ 0.220960] tsens_tm_probe : unable to create IPC Logging 1 for tsens 0x0000000004411000 [ 0.220966] tsens_tm_probe : unable to create IPC Logging 2 for tsens 0x0000000004411000 [ 0.222282] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@5e400000 [ 0.222368] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region [ 0.222501] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region [ 0.222630] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node sdsp_region [ 0.222854] ION heap system created [ 0.222906] ION heap qsecom created at 0x000000005e400000 with size 1400000 [ 0.222909] ION heap qsecom_ta created at 0x00000000f3800000 with size 1000000 [ 0.222912] ION heap secure_heap created [ 0.222934] ION heap secure_display created at 0x00000000f7000000 with size 8c00000 [ 0.253414] platform soc:qcom,ion:qcom,ion-heap@14: ion_secure_carveout: creating heap@0x5f800000, size 0x1e00000 [ 0.253417] ION heap secure_carveout created [ 0.253421] ION heap adsp created at 0x00000000f3400000 with size 400000 [ 0.253835] qupv3_geni_se 4ac0000.qcom,qupv3_0_geni_se: geni_se_probe Failed to allocate log context [ 0.253914] qupv3_geni_se 4cc0000.qcom,qupv3_1_geni_se: geni_se_probe Failed to allocate log context [ 0.254178] PMIC@SID2: PMI632 v2.0 options: 0, 0, 0, 0 [ 0.254267] PMIC@SID0: PM6125 v1.1 options: 0, 0, 0, 0 [ 0.254686] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.254689] ipa ipa3_pre_init:6588 fail to register with bus mgr! [ 0.254698] ipa ipa3_plat_drv_probe:8297 ipa3_init failed [ 0.255301] dev-cpufreq: No tables parsed from DT. [ 0.255465] SDAM base=0xb600 size=128 registered successfully [ 0.255569] Advanced Linux Sound Architecture Driver Initialized. [ 0.255708] Bluetooth: Core ver 2.22 [ 0.255716] NET: Registered protocol family 31 [ 0.255717] Bluetooth: HCI device and connection manager initialized [ 0.255720] Bluetooth: HCI socket layer initialized [ 0.255722] Bluetooth: L2CAP socket layer initialized [ 0.255730] Bluetooth: SCO socket layer initialized [ 0.255903] NetLabel: Initializing [ 0.255904] NetLabel: domain hash size = 128 [ 0.255905] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.255922] NetLabel: unlabeled traffic allowed by default [ 0.255945] pcie:pcie_init. [ 0.262166] qcom-clk-smd-rpm soc:qcom,rpmcc: Registered RPM clocks [ 0.262262] pm6125_s3_level: Bringing 1uV into 16-16uV [ 0.262393] pm6125_s3_floor_level: Bringing 1uV into 16-16uV [ 0.262675] pm6125_s3_level_ao: Bringing 1uV into 16-16uV [ 0.262852] pm6125_s5_level: Bringing 1uV into 16-16uV [ 0.262958] pm6125_s5_floor_level: Bringing 1uV into 16-16uV [ 0.263236] pm6125_s5_level_ao: Bringing 1uV into 16-16uV [ 0.263929] pm6125_l4: regulator get failed, ret=-517 [ 0.264452] pm6125_l4: supplied by pm6125_l7 [ 0.265703] pm6125_l15: supplied by pm6125_l10 [ 0.267287] LCDB: qpnp_lcdb_regulator_probe: LCDB module successfully registered! lcdb_en=1 ldo_voltage=5500mV ncp_voltage=5500mV bst_voltage=5650mV [ 0.267318] sched-energy sched-energy.0: cpu=0 [freq=300000 cap=96 power_d0=12] -> [freq=1804800 cap=572 power_d0=172] [ 0.267321] sched-energy sched-energy.0: cpu=1 [freq=300000 cap=96 power_d0=12] -> [freq=1804800 cap=572 power_d0=172] [ 0.267324] sched-energy sched-energy.0: cpu=2 [freq=300000 cap=96 power_d0=12] -> [freq=1804800 cap=572 power_d0=172] [ 0.267327] sched-energy sched-energy.0: cpu=3 [freq=300000 cap=96 power_d0=12] -> [freq=1804800 cap=572 power_d0=172] [ 0.267329] sched-energy sched-energy.0: cpu=4 [freq=300000 cap=153 power_d0=211] -> [freq=2016000 cap=1024 power_d0=3391] [ 0.267332] sched-energy sched-energy.0: cpu=5 [freq=300000 cap=153 power_d0=211] -> [freq=2016000 cap=1024 power_d0=3391] [ 0.267334] sched-energy sched-energy.0: cpu=6 [freq=300000 cap=153 power_d0=211] -> [freq=2016000 cap=1024 power_d0=3391] [ 0.267337] sched-energy sched-energy.0: cpu=7 [freq=300000 cap=153 power_d0=211] -> [freq=2016000 cap=1024 power_d0=3391] [ 0.267338] sched-energy sched-energy.0: Sched-energy-costs capacity updated [ 0.273984] gcc-trinket 1400000.qcom,gcc: Registered GCC clocks [ 0.274754] gpu_cc_gx_gfx3d_clk_src: set OPP pair(320000000 Hz: 64 uV) on 5900000.qcom,kgsl-3d0 [ 0.274833] gpu_cc_gx_gfx3d_clk_src: set OPP pair(950000000 Hz: 416 uV) on 5900000.qcom,kgsl-3d0 [ 0.274887] gpu_cc-trinket 5990000.qcom,gpupcc: Registered GPU CC clocks [ 0.275261] video_cc-trinket 5b00000.qcom,videocc: Registered Video CC clocks [ 0.275402] arm-smmu 59a0000.kgsl-smmu: \x09non-coherent table walk [ 0.275404] arm-smmu 59a0000.kgsl-smmu: \x09(IDR0.CTTW overridden by FW configuration) [ 0.275406] arm-smmu 59a0000.kgsl-smmu: \x09stream matching with 4 register groups [ 0.276443] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.276446] arm-smmu c600000.apps-smmu: Bus client registration failed [ 0.276775] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.276778] ipa ipa3_pre_init:6588 fail to register with bus mgr! [ 0.276787] ipa ipa3_plat_drv_probe:8297 ipa3_init failed [ 0.278469] disp_cc-trinket 5f00000.qcom,dispcc: Registered Display CC clocks [ 0.278685] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.278688] arm-smmu c600000.apps-smmu: Bus client registration failed [ 0.278933] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.278935] ipa ipa3_pre_init:6588 fail to register with bus mgr! [ 0.278941] ipa ipa3_plat_drv_probe:8297 ipa3_init failed [ 0.279229] clocksource: Switched to clocksource arch_sys_counter [ 0.279286] VFS: Disk quotas dquot_6.6.0 [ 0.279306] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.280079] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL [ 0.280082] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled [ 0.280134] mdss_pll 5e94400.qcom,mdss_dsi_pll: Failed to create debugfs directory [ 0.280138] mdss_pll 5e94400.qcom,mdss_dsi_pll: Failed to create debugfs directory [ 0.280141] mdss_pll 5e94400.qcom,mdss_dsi_pll: Failed to create debugfs directory [ 0.281329] dsi_pll_clock_register_14nm: Registered DSI PLL ndx=0 clocks successfully [ 0.281573] msm_bus_fabric_init_driver [ 0.283902] msm_bus_dev_init_qos: Skipping QOS init for 26 [ 0.283923] msm_bus_device 1880000.ad-hoc-bus: Bus scaling driver probe successful [ 0.284443] NET: Registered protocol family 2 [ 0.284703] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.284840] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.285099] TCP: Hash tables configured (established 32768 bind 32768) [ 0.285174] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.285222] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.285346] NET: Registered protocol family 1 [ 0.285359] PCI: CLS 0 bytes, default 128 [ 0.286076] arm-smmu c600000.apps-smmu: \x09non-coherent table walk [ 0.286079] arm-smmu c600000.apps-smmu: \x09(IDR0.CTTW overridden by FW configuration) [ 0.286082] arm-smmu c600000.apps-smmu: \x09stream matching with 54 register groups [ 0.288240] iommu: Adding device 4ac0000.qcom,qupv3_0_geni_se:qcom,iommu_qupv3_0_geni_se_cb to group 0 [ 0.288330] iommu: Adding device 4cc0000.qcom,qupv3_1_geni_se:qcom,iommu_qupv3_1_geni_se_cb to group 1 [ 0.292813] ipa ipa3_smp2p_probe:8146 fail to get smp2p clk resp bit -517 [ 0.293182] iommu: Adding device soc:ipa_smmu_ap to group 2 [ 0.293323] iommu: Adding device soc:ipa_smmu_wlan to group 3 [ 0.293422] iommu: Adding device soc:ipa_smmu_uc to group 4 [ 0.293500] ipa ipa3_smp2p_probe:8146 fail to get smp2p clk resp bit -517 [ 0.294106] Trying to unpack rootfs image as initramfs... [ 0.934462] Freeing initrd memory: 26756K [ 0.936552] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.943859] Initialise system trusted keyrings [ 0.944111] workingset: timestamp_bits=61 max_order=20 bucket_order=0 [ 0.945919] exFAT: file-system version 5.8-2arter97 [ 0.946197] Registering sdcardfs 0.1 [ 0.946314] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.946359] fuse init (API version 7.26) [ 0.946618] SELinux: Registering netfilter hooks [ 0.947415] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully [ 0.947418] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully [ 0.947423] pfk [pfk_init]: Driver initialized successfully [ 0.952758] Key type asymmetric registered [ 0.952762] Asymmetric key parser 'x509' registered [ 0.952774] io scheduler noop registered [ 0.952846] io scheduler cfq registered (default) [ 0.960830] fb0: Virtual frame buffer device, using 1024K of video memory [ 0.962432] iommu: Adding device 4a00000.qcom,gpi-dma to group 5 [ 0.963671] iommu: Adding device 4c00000.qcom,gpi-dma to group 6 [ 0.966490] icnss: Unable to create log context [ 0.966508] icnss: Unable to create log long context [ 0.968482] iommu: Adding device c800000.qcom,icnss to group 7 [ 0.968586] icnss: Recursive recovery allowed for WLAN [ 0.968598] icnss: adc_tm_dev probe defer [ 0.969281] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped. [ 0.969414] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped. [ 0.969521] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped. [ 0.970865] minidump-id not found for adsp [ 0.971164] minidump-id not found for cdsp [ 0.971478] minidump-id not found for ipa_fws [ 0.971488] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped. [ 0.971509] subsys-pil-tz soc:qcom,ipa_fws: for md_ipa_fws segments only will be dumped. [ 0.971780] minidump-id not found for venus [ 0.971790] subsys-pil-tz 5ae0000.qcom,venus: for venus segments only will be dumped. [ 0.971811] subsys-pil-tz 5ae0000.qcom,venus: for md_venus segments only will be dumped. [ 0.972208] minidump-id not found for a610_zap [ 0.972218] subsys-pil-tz soc:qcom,kgsl-hyp: for a610_zap segments only will be dumped. [ 0.972240] subsys-pil-tz soc:qcom,kgsl-hyp: for md_a610_zap segments only will be dumped. [ 0.974783] smp2p_sleepstate soc:qcom,smp2p_sleepstate: got smp2p-sleepstate-in irq 226 [ 0.976486] msm_geni_serial 4c90000.qcom,qup_uart: Wakeup byte 0xfd [ 0.976592] msm_geni_serial 4c90000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0 [ 0.977961] 4c90000.qcom,qup_uart: ttyHS0 at MMIO 0x4c90000 (irq = 91, base_baud = 0) is a MSM [ 0.978261] msm_geni_serial_init: Driver initialized [ 0.980725] random: crng init done [ 0.982259] diag: Pcie registration initiated for id: 0 [ 0.982494] diag: diag_pcie_register: failed registering pcie channels [ 0.982510] diag: MUX: unable to register pcie operations for proc: 0, err: -22 [ 0.982514] diag: MUX: unable to register PCIe operations, continuing with USB registrations for proc: 0, err: -22 [ 0.987998] iommu: Adding device soc:kgsl_iommu_test_device to group 8 [ 0.988409] iommu: Adding device soc:apps_iommu_test_device to group 9 [ 0.993269] dsi_phy 5e94400.qcom,mdss_dsi_phy0: 5e94400.qcom,mdss_dsi_phy0 supply gdsc not found, using dummy regulator [ 0.993378] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-0 [ 0.993814] drm_dsi_ctrl 5e94000.qcom,mdss_dsi_ctrl0: 5e94000.qcom,mdss_dsi_ctrl0 supply refgen not found, using dummy regulator [ 0.993900] AXI: get_pdata(): Error: Client name not found [ 0.993915] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration [ 0.993922] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-0 [ 0.994386] msm-dsi-display:[dsi_display_parse_te_data] invalid vsync source selection [ 0.994395] OF: graph: no port node found in /soc/qcom,dsi-display [ 0.994430] msm-dsi-panel:[dsi_panel_parse_triggers:1148] [nt36672a video mode dsi tianma panel] fallback to default te-pin-select [ 0.994447] msm-dsi-panel:[dsi_panel_parse_panel_mode:1662] dsi_panel_parse_panel_mode: panel operating mode switch feature disabled [ 0.994500] msm-dsi-panel:[dsi_panel_parse_qsync_caps:1345] [nt36672a video mode dsi tianma panel] qsync min fps not defined rc:-22 [ 0.994520] msm-dsi-panel:[dsi_panel_get:3330] failed to parse qsync features, rc=-22 [ 0.994541] msm-dsi-panel:[dsi_panel_parse_reset_sequence:2021] RESET SEQ LENGTH = 24 [ 0.994585] msm-dsi-panel:[dsi_panel_parse_misc_features:2069] dsi_panel_parse_misc_features: ulps feature enabled [ 0.994589] msm-dsi-panel:[dsi_panel_parse_misc_features:2075] dsi_panel_parse_misc_features: ulps during suspend feature disabled [ 0.994629] msm-dsi-panel:[dsi_panel_parse_esd_config:3247] ESD enabled with mode: register_read [ 0.996857] iommu: Adding device 5e00000.qcom,mdss_mdp to group 10 [ 0.999107] msm_drm 5e00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops 0xffffff8009799a30) [ 0.999879] msm-dsi-display:[dsi_display_bind] Successfully bind display panel 'dsi_nt36672a_tianma_vid_display' [ 1.000283] msm_drm 5e00000.qcom,mdss_mdp: bound soc:qcom,dsi-display (ops 0xffffff80097966f8) [ 1.000358] [drm] mapped mdp address space @ffffff8011900000 [ 1.000575] msm_drm 5e00000.qcom,mdss_mdp: failed to get memory resource: vbif_nrt_phys [ 1.000606] msm_drm 5e00000.qcom,mdss_mdp: failed to get memory resource: sid_phys [ 1.000688] [drm:_sde_kms_get_splash_data:3294] splash mem num_regions:1 [ 1.000717] brd: module loaded [ 1.000733] [drm:_sde_kms_get_splash_data:3327] splash mem for disp:1 add:5c000000 size:f00000 [ 1.000745] [sde_rsc:sde_rsc_client_create:105]: rsc not probed yet or not available [ 1.002442] [drm:sde_kms_hw_init:3475] sde hardware revision:0x50040000 [ 1.003071] loop: module loaded [ 1.003199] zram: Added device: zram0 [ 1.003749] [drm] Created domain mdp_ns [80000000,80000000] secure=0 [ 1.005845] iommu: Adding device 5e00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb to group 11 [ 1.005882] [drm] probing device qcom,smmu_sde_sec [ 1.005890] [drm] Created domain mdp_s [80000000,80000000] secure=1 [ 1.008500] [sde_rsc:is_sde_rsc_available:261]: rsc idx:0 not probed yet or not available [ 1.008541] [sde_rsc:sde_rsc_client_create:105]: rsc not probed yet or not available [ 1.008826] [sde_rsc:sde_rsc_client_create:105]: rsc not probed yet or not available [ 1.008903] [drm:reg_dmav1_init_sspp_op_v4] *ERROR* invalid feature map 12 for feature 31 [ 1.009112] [drm:reg_dmav1_init_sspp_op_v4] *ERROR* invalid feature map 12 for feature 31 [ 1.009476] 88 to big cluster [ 1.009546] 88 to big cluster [ 1.009600] 124 to little cluster [ 1.009652] 124 to little cluster [ 1.009710] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.009712] [drm] No driver support for vblank timestamp query. [ 1.010385] [drm] Initialized msm_drm 1.2.0 20130625 for 5e00000.qcom,mdss_mdp on minor 0 [ 1.010467] msm-dsi-panel:[dsi_panel_parse_topology:2844] default topology: lm: 1 comp_enc:0 intf: 1 [ 1.010525] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:2937] partial update disabled as the property is not set [ 1.010695] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 229 registered [ 1.076907] iommu: Adding device 59a0000.qcom,kgsl-iommu:gfx3d_user to group 12 [ 1.077244] iommu: Adding device 59a0000.qcom,kgsl-iommu:gfx3d_secure to group 13 [ 1.102217] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1401000 [ 1.102234] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE [ 1.102241] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem [ 1.102244] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2 [ 1.102328] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1 [ 1.102912] iommu: Adding device 1b20000.qcedev to group 14 [ 1.104394] qce 1b20000.qcedev: QTI Crypto 5.5.0 device found @0x1b20000 [ 1.104409] sps:BAM 0x0000000001b04000 is registered. [ 1.104501] sps:BAM 0x0000000001b04000 (va:0xffffff80118c0000) enabled: ver:0x27, number of pipes:16 [ 1.104623] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001b04000 irq 45 [ 1.108112] iommu: Adding device 1b20000.qcrypto to group 15 [ 1.109239] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ [ 1.109830] qcrypto 1b20000.qcrypto: QTI Crypto 5.5.0 device found @0x1b20000 [ 1.110016] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001b04000 irq 45 [ 1.113093] qcrypto 1b20000.qcrypto: qcrypto-ecb-aes [ 1.113216] qcrypto 1b20000.qcrypto: qcrypto-cbc-aes [ 1.113284] qcrypto 1b20000.qcrypto: qcrypto-ctr-aes [ 1.113345] qcrypto 1b20000.qcrypto: qcrypto-ecb-des [ 1.113408] qcrypto 1b20000.qcrypto: qcrypto-cbc-des [ 1.113468] qcrypto 1b20000.qcrypto: qcrypto-ecb-3des [ 1.113529] qcrypto 1b20000.qcrypto: qcrypto-cbc-3des [ 1.113592] qcrypto 1b20000.qcrypto: qcrypto-xts-aes [ 1.113660] qcrypto 1b20000.qcrypto: qcrypto-sha1 [ 1.113719] qcrypto 1b20000.qcrypto: qcrypto-sha256 [ 1.113781] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes [ 1.113842] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des [ 1.113904] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des [ 1.113966] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes [ 1.114026] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des [ 1.114087] qcrypto 1b20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des [ 1.114151] qcrypto 1b20000.qcrypto: qcrypto-hmac-sha1 [ 1.114215] qcrypto 1b20000.qcrypto: qcrypto-hmac-sha256 [ 1.114276] qcrypto 1b20000.qcrypto: qcrypto-aes-ccm [ 1.114337] qcrypto 1b20000.qcrypto: qcrypto-rfc4309-aes-ccm [ 1.115091] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed [ 1.115560] SCSI Media Changer driver v0.25 [ 1.117500] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 1.118557] libphy: Fixed MDIO Bus: probed [ 1.118561] tun: Universal TUN/TAP device driver, 1.6 [ 1.118599] PPP generic driver version 2.4.2 [ 1.118639] PPP BSD Compression module registered [ 1.118641] PPP Deflate Compression module registered [ 1.118682] PPP MPPE Compression module registered [ 1.118686] NET: Registered protocol family 24 [ 1.118696] PPTP driver version 0.8.5 [ 1.118993] CLD80211: Initializing [ 1.119060] usbcore: registered new interface driver r8152 [ 1.119072] usbcore: registered new interface driver asix [ 1.119083] usbcore: registered new interface driver ax88179_178a [ 1.119093] usbcore: registered new interface driver cdc_ether [ 1.119103] usbcore: registered new interface driver net1080 [ 1.119114] usbcore: registered new interface driver cdc_subset [ 1.119126] usbcore: registered new interface driver zaurus [ 1.119139] usbcore: registered new interface driver cdc_ncm [ 1.124410] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' [ 1.126022] msm-qusb-phy 1613000.qusb: 1613000.qusb supply USB3_GDSC not found, using dummy regulator [ 1.129545] iommu: Adding device 4e00000.ssusb to group 16 [ 1.131093] dwc3 4e00000.dwc3: changing max_speed on rev 00000000 [ 1.131339] dwc3 4e00000.dwc3: Error getting ipc_log_ctxt [ 1.131365] dwc3 4e00000.dwc3: Error getting ipc_log_ctxt for ep_events [ 1.133375] Invalid index Defaulting curr to 0 [ 1.136652] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.136663] ehci-pci: EHCI PCI platform driver [ 1.136675] ehci-platform: EHCI generic platform driver [ 1.137138] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.137153] ohci-pci: OHCI PCI platform driver [ 1.137168] ohci-platform: OHCI generic platform driver [ 1.138252] usbcore: registered new interface driver usb-storage [ 1.138264] usbcore: registered new interface driver usb_ehset_test [ 1.138274] usbcore: registered new interface driver lvs [ 1.138555] fgsi_init: Err allocating ipc_log_ctxt [ 1.140139] spi_geni 4a88000.spi: proto 1 [ 1.140416] spi_geni 4a88000.spi: tx_fifo 16 rx_fifo 16 tx_width 32 [ 1.161397] input: NVTCapacitiveTouchScreen as /devices/virtual/input/input1 [ 1.161659] IRQ-232 not set for request with affinity flag [ 1.161669] ------------[ cut here ]------------ [ 1.161681] WARNING: CPU: 3 PID: 1 at pm_qos_add_request+0x214/0x220 [ 1.161688] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G S 4.14.236-SD665-Fury #1 [ 1.161690] Hardware name: Qualcomm Technologies, Inc. trinket pm6125 + pmi632 IDP (DT) [ 1.161694] task: 0000000035dd7ca4 task.stack: 000000002cb93f48 [ 1.161698] pc : pm_qos_add_request+0x214/0x220 [ 1.161701] lr : pm_qos_add_request+0x214/0x220 [ 1.161703] sp : ffffffc0fac9baa0 pstate : 60000145 [ 1.161705] x29: ffffffc0fac9baa0 x28: 000000000147aeb8 [ 1.161709] x27: 00000000000003ff x26: ffffff80097c1fe0 [ 1.161713] x25: ffffffc0f12b2000 x24: ffffff80097c1de2 [ 1.161717] x23: ffffff80094fdbf8 x22: ffffffc0f1188800 [ 1.161721] x21: 00000000ffffffff x20: 0000000000000001 [ 1.161725] x19: ffffffc0f12b2838 x18: 0000000000100000 [ 1.161729] x17: 0000000000000000 x16: 0000000000000000 [ 1.161733] x15: ffffff8009e369a0 x14: 0000000000000000 [ 1.161737] x13: ffffff8009e36000 x12: ffffff8009e36000 [ 1.161741] x11: ffffff8009c2f000 x10: ffffffc0fac9baa0 [ 1.161745] x9 : 0000000000000000 x8 : ffffff8009e34088 [ 1.161749] x7 : 0000000000000004 x6 : 0000000082000000 [ 1.161753] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.161757] x3 : ffffffffffffffff x2 : ffffff8009c2fcb8 [ 1.161761] x1 : ffffffc0fac90000 x0 : 000000000000002e [ 1.161766] \x0aPC: 0xffffff80081129f4: [ 1.161767] 29f4 b00097c0 91138000 91044000 94000eeb d4210000 17ffffcc aa1303e0 d2800102 [ 1.161779] 2a14 52801fe1 b800841f 9445c1f9 b9401261 b00097c0 91138000 91062000 94000edf [ 1.161789] 2a34 d4210000 17ffffa2 00000000 b4000380 a9be7bfd 910003fd a90153f3 aa0003f3 [ 1.161799] 2a54 b9407800 340002e0 2a0103f4 91020260 97ff14b7 b9405260 b9407a64 6b00029f [ 1.161809] \x0aLR: 0xffffff80081129f4: [ 1.161810] 29f4 b00097c0 91138000 91044000 94000eeb d4210000 17ffffcc aa1303e0 d2800102 [ 1.161820] 2a14 52801fe1 b800841f 9445c1f9 b9401261 b00097c0 91138000 91062000 94000edf [ 1.161830] 2a34 d4210000 17ffffa2 00000000 b4000380 a9be7bfd 910003fd a90153f3 aa0003f3 [ 1.161840] 2a54 b9407800 340002e0 2a0103f4 91020260 97ff14b7 b9405260 b9407a64 6b00029f [ 1.161850] \x0aSP: 0xffffffc0fac9ba60: [ 1.161851] ba60 08112a34 ffffff80 60000145 00000000 00000008 00000000 f0d7cc00 ffffffc0 [ 1.161861] ba80 ffffffff ffffffff 00000040 00000000 fac9baa0 ffffffc0 08112a34 ffffff80 [ 1.161871] baa0 fac9bad0 ffffffc0 089aa550 ffffff80 09eb1000 ffffff80 094fdbd0 ffffff80 [ 1.161881] bac0 00000002 00000000 f1188800 ffffffc0 fac9bb50 ffffffc0 08844f98 ffffff80 [ 1.161891] [ 1.161893] Call trace: [ 1.161897] pm_qos_add_request+0x214/0x220 [ 1.161904] nvt_ts_probe+0x5d0/0xc60 [ 1.161909] spi_drv_probe+0x78/0xe0 [ 1.161915] driver_probe_device+0x27c/0x400 [ 1.161918] __driver_attach+0xdc/0x100 [ 1.161921] bus_for_each_dev+0x68/0xc0 [ 1.161924] driver_attach+0x20/0x40 [ 1.161927] bus_add_driver+0x198/0x200 [ 1.161929] driver_register+0x74/0x120 [ 1.161933] __spi_register_driver+0x58/0x60 [ 1.161940] nvt_driver_init+0xbc/0xf8 [ 1.161945] do_one_initcall+0xf0/0x180 [ 1.161949] kernel_init_freeable+0x1dc/0x278 [ 1.161952] kernel_init+0x10/0x100 [ 1.161957] ret_from_fork+0x10/0x28 [ 1.161964] ---[ end trace fe763dc347a975b5 ]--- [ 1.162193] [FTS_TS/E]fts_ts_init:Unknow Touch [ 1.162914] fpc1020 soc:fpc1020: found pin control fpc1020_reset_reset [ 1.162918] fpc1020 soc:fpc1020: found pin control fpc1020_reset_active [ 1.162921] fpc1020 soc:fpc1020: found pin control fpc1020_irq_active [ 1.173530] fpc1020 soc:fpc1020: IRQ after reset 92=1 [ 1.173534] fpc1020 soc:fpc1020: fpc1020_probe: ok [ 1.173632] fpc1020_init OK [ 1.173635] gf_spi: hml gf_init failed as fpsensor = 1(2=gdx) [ 1.174104] qcom,qpnp-rtc 1c40000.qcom,spmi:qcom,pm6125@0:qcom,pm6125_rtc: rtc core: registered qpnp_rtc as rtc0 [ 1.174484] i2c /dev entries driver [ 1.174595] IR NEC protocol handler initialized [ 1.174597] IR RC5(x/sz) protocol handler initialized [ 1.174599] IR RC6 protocol handler initialized [ 1.174601] IR JVC protocol handler initialized [ 1.174603] IR Sony protocol handler initialized [ 1.174605] IR SANYO protocol handler initialized [ 1.174606] IR Sharp protocol handler initialized [ 1.174609] IR MCE Keyboard/mouse protocol handler initialized [ 1.174611] IR XMP protocol handler initialized [ 1.174895] i2c_geni 4a84000.i2c: Bus frequency not specified, default to 400KHz. [ 1.175733] trinket-pinctrl 400000.pinctrl: pin GPIO_6 already requested by 4a88000.spi; cannot claim for 4a88000.i2c [ 1.175745] trinket-pinctrl 400000.pinctrl: pin-6 (4a88000.i2c) status -22 [ 1.175750] trinket-pinctrl 400000.pinctrl: could not request pin 6 (GPIO_6) from group gpio6 on device 400000.pinctrl [ 1.175755] i2c_geni 4a88000.i2c: Error applying setting, reverse things back [ 1.175768] i2c_geni: probe of 4a88000.i2c failed with error -22 [ 1.176115] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-rot-vbif-memtype : doesn't exist in device tree [ 1.176125] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-qos-lut : doesn't exist in device tree [ 1.176129] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-danger-lut : doesn't exist in device tree [ 1.176132] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-safe-lut : doesn't exist in device tree [ 1.176202] register_client_adhoc:Failed to find path.src 1 dest 590 [ 1.176204] sde_mdp_bus_scale_register: <SDEROT_WARN> reg_bus_client register failed [ 1.177232] No change in context(0==0), skip [ 1.178067] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:1, panic:1, dump:2 [ 1.178865] sde_rotator 5e00000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success [ 1.179369] i2c_geni 4a8c000.i2c: Bus frequency not specified, default to 400KHz. [ 1.179884] iommu: Adding device 5e00000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 17 [ 1.179922] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful! [ 1.179926] i2c_geni 4a90000.i2c: Bus frequency not specified, default to 400KHz. [ 1.179956] iommu: Adding device 5e00000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 18 [ 1.179974] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful! [ 1.180137] i2c_geni 4a90000.i2c: Invalid proto 2 [ 1.181107] nq-nci 1-0028: ese GPIO <OPTIONAL> error getting from OF node [ 1.181136] nq-nci 1-0028: nqx_probe: ese gpio not provided [ 1.181848] iommu: Adding device 5a00000.qcom,vidc:non_secure_cb to group 19 [ 1.182221] iommu: Adding device 5a00000.qcom,vidc:secure_bitstream_cb to group 20 [ 1.183367] iommu: Adding device 5a00000.qcom,vidc:secure_pixel_cb to group 21 [ 1.184231] iommu: Adding device 5a00000.qcom,vidc:secure_non_pixel_cb to group 22 [ 1.185618] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 23 [ 1.185641] CAM-SMMU cam_smmu_populate_sids:2114 __debug cnt = 6, cb->name: :vfe sid [0] = 1056\x0a, [ 1.185644] CAM-SMMU cam_smmu_populate_sids:2114 __debug cnt = 6, cb->name: :vfe sid [1] = 1057\x0a, [ 1.186010] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb2 to group 24 [ 1.186026] CAM-SMMU cam_smmu_populate_sids:2114 __debug cnt = 3, cb->name: :cpp sid [0] = 2048\x0a, [ 1.186330] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 25 [ 1.186348] CAM-SMMU cam_smmu_populate_sids:2114 __debug cnt = 3, cb->name: :jpeg_enc0 sid [0] = 2080\x0a, [ 1.186650] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb5 to group 26 [ 1.186669] CAM-SMMU cam_smmu_populate_sids:2114 __debug cnt = 3, cb->name: :jpeg_dma sid [0] = 2081\x0a, [ 1.190991] msm_actuator_platform_probe:1999 msm_actuator_platform_probe: No/Error Actuator GPIOs [ 1.191034] msm_actuator_platform_probe:1999 msm_actuator_platform_probe: No/Error Actuator GPIOs [ 1.191354] msm_eeprom_platform_probe failed 1895 [ 1.191480] msm_eeprom_platform_probe failed 1895 [ 1.191586] msm_eeprom_platform_probe failed 1895 [ 1.191729] msm_eeprom_platform_probe failed 1895 [ 1.191838] msm_eeprom_platform_probe failed 1895 [ 1.197164] MSM-CPP cpp_init_hardware:1135 CPP HW Version: 0x60010004 [ 1.197171] MSM-CPP cpp_init_hardware:1153 stream_cnt:0 [ 1.197794] MSM-CPP cpp_release_hardware:1216 cpp hw release done [ 1.198223] CAM-SOC msm_camera_get_reg_base:894 err: mem resource vfe_fuse not found [ 1.198226] CAM-SOC msm_camera_get_res_size:937 err: mem resource vfe_fuse not found [ 1.198673] CAM-SOC msm_camera_get_reg_base:894 err: mem resource vfe_fuse not found [ 1.198677] CAM-SOC msm_camera_get_res_size:937 err: mem resource vfe_fuse not found [ 1.200451] __msm_jpeg_init:1594] Jpeg Device id 0 [ 1.202081] Couldn't parse device tree rc=-517 [ 1.209513] device-mapper: uevent: version 1.0.3 [ 1.209572] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.209725] bt_dt_parse_vreg_info: qca,bt-vdd-vl: is not provided in device tree [ 1.209727] bt_dt_parse_vreg_info: qca,bt-vdd-vm: is not provided in device tree [ 1.209728] bt_dt_parse_vreg_info: qca,bt-vdd-5c: is not provided in device tree [ 1.209730] bt_dt_parse_vreg_info: qca,bt-vdd-5a: is not provided in device tree [ 1.209732] bt_dt_parse_vreg_info: qca,bt-vdd-vh: is not provided in device tree [ 1.209739] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree [ 1.209740] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree [ 1.209742] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree [ 1.209749] bt_dt_parse_clk_info: clocks is not provided in device tree [ 1.209751] bt_power_populate_dt_pinfo: clock not provided in device tree [ 1.210364] sdhci: Secure Digital Host Controller Interface driver [ 1.210366] sdhci: Copyright(c) Pierre Ossman [ 1.210367] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.210441] probe start! 1 [ 1.210624] sgm_init_registers: 0x00 reg = 0x18, ret = 24 [ 1.210624] backlight ic is ktd3137 ! [ 1.211424] ktd3136 probe err = 0 [ 1.211617] qcom_ice_get_pdevice: found ice device ffffffc0f122ee00 [ 1.211621] qcom_ice_get_pdevice: matching platform device ffffffc0fa3c2400 [ 1.212205] qpnp_vibrator_ldo_probe: Vibrator LDO successfully registered: uV = 3000000, overdrive = disabled [ 1.212678] usbcore: registered new interface driver usbhid [ 1.212679] usbhid: USB HID core driver [ 1.212733] ashmem: initialized [ 1.212760] wlan_hdd_state wlan major(501) initialized [ 1.213755] qcom_ice 4748000.sdcc1ice: QC ICE 3.1.79 device found @0xffffff80117e8000 [ 1.214578] mmc0: SDHCI controller on 4744000.sdhci [4744000.sdhci] using 64-bit ADMA in CMDQ mode [ 1.285144] nq-nci 1-0028: nqx_probe: probing NFCC NQxxx exited successfully [ 1.293256] mmc0: Out-of-interrupt timeout is 100[ms] [ 1.293260] mmc0: eMMC FW version: 0x04 [ 1.293262] mmc0: CMDQ supported: depth: 32 [ 1.299469] cmdq_host_alloc_tdl: desc_size: 1024 data_sz: 63488 slot-sz: 32 [ 1.299762] mmc0: CMDQ enabled on card [ 1.299773] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.300225] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1 [ 1.300229] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1 [ 1.300291] mmcblk0: mmc0:0001 S0J9K8 58.2 GiB [ 1.300442] mmcblk0rpmb: mmc0:0001 S0J9K8 partition 3 16.0 MiB [ 1.302447] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 p62 p63 p64 p65 p66 p67 p68 p69 p70 p71 p72 p73 p74 p75 p76 p77 p78 p79 p80 p81 p82 p83 p84 p85 p86 p87 [ 1.307121] sdhci_msm 4784000.sdhci: sdhci_msm_probe: ICE device is not enabled [ 1.320282] mmc1: SDHCI controller on 4784000.sdhci [4784000.sdhci] using 64-bit ADMA in legacy mode [ 1.356359] bimc-bwmon 1b8e200.qcom,cpu-cpu-ddr-bwmon: BW HWmon governor registered. [ 1.358262] arm-memlat-mon soc:qcom,cpu0-cpu-ddr-latmon: Memory Latency governor registered. [ 1.359379] arm-memlat-mon soc:qcom,cpu4-cpu-ddr-latmon: Memory Latency governor registered. [ 1.360535] arm-memlat-mon soc:qcom,cpu0-computemon: Compute governor registered. [ 1.361645] arm-memlat-mon soc:qcom,cpu4-computemon: Compute governor registered. [ 1.377910] usbcore: registered new interface driver snd-usb-audio [ 1.378086] iommu: Adding device soc:usb_audio_qmi_dev to group 27 [ 1.382245] apr_probe: Unable to create ipc log context [ 1.392148] reading version=0 - retry(0) [ 1.417882] tas2562 0-004c: Driver ID: 2.0.0 [ 1.417891] tas2562 0-004c: tas2562_i2c_probe enter [ 1.417923] tas2562 0-004c: ti,asi-format=0 [ 1.417926] tas2562 0-004c: ti,channels=1 [ 1.417928] tas2562 0-004c: ti,left-channel=0x4c [ 1.417934] tas2562 0-004c: ti,reset-gpio=27 [ 1.417937] tas2562 0-004c: ti,irq-gpio=132 [ 1.417942] tas2562 0-004c: tas2562_i2c_probe: Failed to request gpio 27 [ 1.417989] tas2562: probe of 0-004c failed with error -22 [ 1.422961] msm-dai-q6-hdmi soc:qcom,msm-dai-q6-hdmi_ms: invalid device ID 24578 [ 1.423441] msm-auxpcm-dev soc:qcom,msm-sen-auxpcm: msm_auxpcm_dev_probe: invalid DT intf name senary [ 1.435595] msm-dai-tdm soc:qcom,msm-dai-tdm-sen-rx: msm_dai_tdm_q6_probe: group id not supported 0x9150 [ 1.435610] msm-dai-tdm: probe of soc:qcom,msm-dai-tdm-sen-rx failed with error -22 [ 1.435630] msm-dai-tdm soc:qcom,msm-dai-tdm-sen-tx: msm_dai_tdm_q6_probe: group id not supported 0x9151 [ 1.435637] msm-dai-tdm: probe of soc:qcom,msm-dai-tdm-sen-tx failed with error -22 [ 1.446809] rmnet_perf_init(): initializing rmnet_perf [ 1.446815] rmnet_perf_config_notify_cb(): rmnet_perf netdevice register, name = lo [ 1.446817] rmnet_perf_config_notify_cb(): rmnet_perf netdevice register, name = bond0 [ 1.446819] rmnet_perf_config_notify_cb(): rmnet_perf netdevice register, name = dummy0 [ 1.446822] rmnet_shs_module_init(): Starting rmnet SHS module [ 1.446894] GACT probability NOT on [ 1.446902] Mirror/redirect action on [ 1.446910] u32 classifier [ 1.446912] Actions configured [ 1.446918] Netfilter messages via NETLINK v0.30. [ 1.447019] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.447073] ctnetlink v0.93: registering with nfnetlink. [ 1.447231] xt_time: kernel timezone is -0000 [ 1.447296] wireguard: WireGuard 1.0.20210606 loaded. See www.wireguard.com for information. [ 1.447297] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 1.447351] gre: GRE over IPv4 demultiplexor driver [ 1.447353] IPv4 over IPsec tunneling driver [ 1.447486] rmnet_perf_config_notify_cb(): rmnet_perf netdevice register, name = ip_vti0 [ 1.447596] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.448208] arp_tables: arp_tables: (C) 2002 David S. Miller [ 1.448317] Initializing XFRM netlink socket [ 1.448327] IPsec XFRM device driver [ 1.448466] NET: Registered protocol family 10 [ 1.448981] Segment Routing with IPv6 [ 1.449020] mip6: Mobile IPv6 [ 1.449029] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.449492] rmnet_perf_config_notify_cb(): rmnet_perf netdevice register, name = ip6_vti0 [ 1.449596] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.449693] rmnet_perf_config_notify_cb(): rmnet_perf netdevice register, name = sit0 [ 1.449882] rmnet_perf_config_notify_cb(): rmnet_perf netdevice register, name = ip6tnl0 [ 1.449964] NET: Registered protocol family 17 [ 1.449976] NET: Registered protocol family 15 [ 1.449990] Ebtables v2.0 registered [ 1.450070] l2tp_core: L2TP core driver, V2.0 [ 1.450076] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 1.450078] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 1.450088] l2tp_netlink: L2TP netlink interface [ 1.450106] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 1.450107] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 1.450130] sctp: Hash tables configured (bind 256/256) [ 1.450240] Key type dns_resolver registered [ 1.450916] icnss: Recursive recovery allowed for WLAN [ 1.450921] icnss: adc_tm_dev probe defer [ 1.452064] dwc3 4e00000.dwc3: changing max_speed on rev 00000000 [ 1.452251] dwc3 4e00000.dwc3: Error getting ipc_log_ctxt [ 1.452258] dwc3 4e00000.dwc3: Error getting ipc_log_ctxt for ep_events [ 1.453457] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (4f04000.qcom,usbbam) [ 1.453469] sps:BAM 0x0000000004f04000 is registered. [ 1.454094] Invalid index Defaulting curr to 0 [ 1.469423] mmc1: new ultra high speed SDR104 SDHC card at address 0001 [ 1.469702] mmcblk1: mmc1:0001 SD16G 29.1 GiB [ 1.470687] mmcblk1: p1 [ 1.470691] of_batterydata_get_best_profile: 4089085_Longcheer_M516_4000mAH_PMI632_averaged_MasterSlave_Jul5th2019 found [ 1.470933] QG-K: qg_batterydata_init: QG Battery-profile loaded [ 1.473298] QG-K: qg_determine_pon_soc: using SHUTDOWN_SOC @ PON ocv_uv=3812100uV soc=40 [ 1.473487] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.474203] QG-K: qpnp_qg_probe: QG initialized! battery_profile=4089085_Longcheer_M516_4000mAH_PMI632_averaged_MasterSlave_Jul5th2019 SOC=40 QG_subtype=3 [ 1.475565] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.476732] pmi632_charger: smblib_get_irq_status: Couldn't read MISC_PBS_RT_STS_REG rc=-19 [ 1.478276] of_batterydata_get_best_profile: 4089085_Longcheer_M516_4000mAH_PMI632_averaged_MasterSlave_Jul5th2019 found [ 1.481749] SMB5 status - usb:present=0 type=0 batt:present = 1 health = 1 charge = 1 [ 1.481767] QPNP SMB5 probed successfully [ 1.484298] pmi632_charger: smblib_get_irq_status: Couldn't read MISC_PBS_RT_STS_REG rc=-19 [ 1.544535] icnss: Recursive recovery allowed for WLAN [ 1.547217] icnss c800000.qcom,icnss: for wcss_msa0 segments only will be dumped. [ 1.547302] icnss: Platform driver probed successfully [ 1.547841] dwc3 4e00000.dwc3: changing max_speed on rev 00000000 [ 1.548050] dwc3 4e00000.dwc3: Error getting ipc_log_ctxt [ 1.548057] dwc3 4e00000.dwc3: Error getting ipc_log_ctxt for ep_events [ 1.549259] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (4f04000.qcom,usbbam) [ 1.549270] sps:BAM 0x0000000004f04000 is registered. [ 1.552178] registered taskstats version 1 [ 1.552181] Loading compiled-in X.509 certificates [ 1.554288] msm-dwc3 4e00000.ssusb: DWC3 exited from low power mode [ 1.556966] msm-dwc3 4e00000.ssusb: DWC3 in low power mode [ 1.609820] Unable to find log_buf by kallsyms! [ 1.610860] ADSPRPC: Secure VMID = 22 [ 1.610864] ADSPRPC: Secure VMID = 37 [ 1.611359] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 28 [ 1.611983] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 29 [ 1.612589] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 30 [ 1.613134] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 31 [ 1.613644] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 32 [ 1.614152] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 33 [ 1.614649] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 34 [ 1.616179] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 35 [ 1.618734] ngd_msm_ctrl a340000.slim: error creating ipc_logging context [ 1.618744] ngd_msm_ctrl a340000.slim: error creating ipc_error_logging context [ 1.619086] iommu: Adding device a340000.slim:qcom,iommu_slim_ctrl_cb to group 36 [ 1.621327] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input2 [ 1.621642] qcom,qpnp-rtc 1c40000.qcom,spmi:qcom,pm6125@0:qcom,pm6125_rtc: setting system clock to 1974-11-01 19:41:13 UTC (152566873) [ 1.623345] lpm_levels: register_cluster_lpm_stats() [ 1.623475] lpm_levels: register_cluster_lpm_stats() [ 1.627386] rmnet_ipa3 started initialization [ 1.628394] RNDIS_IPA module is loaded. [ 1.630896] ufs_phy_gdsc: disabling [ 1.630925] dbu1: disabling [ 1.630927] cam_avdd_gpio_regulator: disabling [ 1.630956] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests [ 1.631020] ALSA device list: [ 1.631022] No soundcards found. [ 1.631053] Warning: unable to open an initial console. [ 1.631467] Freeing unused kernel memory: 2048K [ 1.764344] SELinux: 8192 avtab hash slots, 28371 rules. [ 1.769031] SELinux: 8192 avtab hash slots, 28371 rules. [ 1.769053] SELinux: 1 users, 2 roles, 1896 types, 0 bools, 1 sens, 1024 cats [ 1.769056] SELinux: 102 classes, 28371 rules [ 1.770526] SELinux: policy capability network_peer_controls=1 [ 1.770528] SELinux: policy capability open_perms=1 [ 1.770529] SELinux: policy capability extended_socket_class=1 [ 1.770530] SELinux: policy capability always_check_network=0 [ 1.770531] SELinux: policy capability cgroup_seclabel=0 [ 1.770532] SELinux: policy capability nnp_nosuid_transition=1 [ 1.770533] SELinux: Completing initialization. [ 1.770534] SELinux: Setting up existing superblocks. [ 2.015887] pmi632_charger: smblib_get_irq_status: Couldn't read MISC_PBS_RT_STS_REG rc=-19 [ 2.218861] binder: 464:464 ioctl 40046210 7fe0198cd4 returned -22 [ 2.225080] binder: 463:463 ioctl 40046210 7fdc7afdd4 returned -22 [ 2.238318] Mass Storage Function, version: 2009/09/11 [ 2.238325] LUN: removable file: (no medium) [ 2.248512] file system registered [ 2.251781] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0) [ 2.252542] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1) [ 2.253212] f_cdev_alloc: port_name:at_usb2 (0000000000000000) portno:(2) [ 2.256143] binder: 462:462 ioctl 40046210 7fc29d9084 returned -22 [ 2.259950] binder: 465:465 ioctl 40046210 7fe4524fa4 returned -22 [ 2.267867] binder: 482:482 ioctl 40046210 7fe7b03cf4 returned -22 [ 2.270067] binder: 465:465 ioctl 40046210 7fe45243e4 returned -22 [ 2.473837] EXT4-fs (mmcblk0p69): recovery complete [ 2.474251] EXT4-fs (mmcblk0p69): mounted filesystem with ordered data mode. Opts: [ 2.480314] SELinux: Context u:object_r:vendor_persist_time_file:s0 is not valid (left unmapped). [ 2.521637] EXT4-fs (mmcblk0p85): mounted filesystem without journal. Opts: [ 2.616740] [brightness]sgm_brightness_set brightness = 204 [ 2.661286] [brightness]sgm_brightness_set brightness = 204 [ 2.736629] EXT4-fs (mmcblk0p82): recovery complete [ 2.737254] EXT4-fs (mmcblk0p82): mounted filesystem with ordered data mode. Opts: [ 2.759615] F2FS-fs (mmcblk0p87): Unrecognized mount option "inlinecrypt" or missing value [ 2.836090] F2FS-fs (mmcblk0p87): Mounted with checkpoint version = 2eea9204 [ 3.488394] of_batterydata_get_best_profile: 4089085_Longcheer_M516_4000mAH_PMI632_averaged_MasterSlave_Jul5th2019 found [ 3.845572] binder: 469:469 ioctl 40046210 7fd33e5484 returned -22 [ 4.000147] binder: 521:521 ioctl 40046210 7ff1e8ac74 returned -22 [ 4.037794] binder: 533:533 ioctl 40046210 7fdcf53784 returned -22 [ 4.064965] binder: 532:532 ioctl 40046210 7fe5987f34 returned -22 [ 4.921972] fscrypt: AES-256-CTS-CBC using implementation "cts(cbc-aes-ce)" [ 4.980815] SELinux: Context u:object_r:system_userdir_file:s0 is not valid (left unmapped). [ 4.981840] SELinux: Context u:object_r:vendor_userdir_file:s0 is not valid (left unmapped). [ 5.038805] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 5.077152] SELinux: Context u:object_r:media_userdir_file:s0 is not valid (left unmapped). [ 5.134299] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 5.157884] EXT4-fs (mmcblk0p84): mounted filesystem with ordered data mode. Opts: [ 5.492621] EXT4-fs (mmcblk0p69): mounted filesystem with ordered data mode. Opts: [ 5.524234] EXT4-fs (mmcblk0p85): mounted filesystem without journal. Opts: [ 5.545589] EXT4-fs (mmcblk0p60): mounted filesystem with ordered data mode. Opts: discard [ 5.566345] F2FS-fs (mmcblk0p87): Unrecognized mount option "inlinecrypt" or missing value [ 5.608864] F2FS-fs (mmcblk0p87): recover fsync data on readonly fs [ 5.609898] F2FS-fs (mmcblk0p87): Mounted with checkpoint version = 2eea9207 [ 5.614344] SELinux: Context u:object_r:per_boot_file:s0 is not valid (left unmapped). [ 5.616939] SELinux: Context u:object_r:vendor_tombstone_data_file:s0 is not valid (left unmapped). [ 5.618278] SELinux: Context u:object_r:vendor_ramdump_vendor_data_file:s0 is not valid (left unmapped). [ 5.618382] SELinux: Context u:object_r:vendor_display_vendor_data_file:s0 is not valid (left unmapped). [ 5.618475] SELinux: Context u:object_r:vendor_lm_data_file:s0 is not valid (left unmapped). [ 5.618571] SELinux: Context u:object_r:vendor_media_data_file:s0 is not valid (left unmapped). [ 5.618662] SELinux: Context u:object_r:vendor_data_tzstorage_file:s0 is not valid (left unmapped). [ 5.618823] SELinux: Context u:object_r:vendor_camera_data_file:s0 is not valid (left unmapped). [ 5.619710] SELinux: Context u:object_r:vendor_bt_data_file:s0 is not valid (left unmapped). [ 5.619809] SELinux: Context u:object_r:vendor_wifi_vendor_data_file:s0 is not valid (left unmapped). [ 5.620254] SELinux: Context u:object_r:vendor_wifi_vendor_wpa_socket:s0 is not valid (left unmapped). [ 5.620904] SELinux: Context u:object_r:vendor_wigig_hostapd_socket:s0 is not valid (left unmapped). [ 5.632539] SELinux: Context u:object_r:vendor_sensing_vendor_data_file:s0 is not valid (left unmapped). [ 5.632744] SELinux: Context u:object_r:vendor_cnd_data_file:s0 is not valid (left unmapped). [ 5.633218] SELinux: Context u:object_r:vendor_audio_data_file:s0 is not valid (left unmapped). [ 5.634971] SELinux: Context u:object_r:vendor_radio_vendor_data_file:s0 is not valid (left unmapped). [ 5.635977] SELinux: Context u:object_r:vendor_mbn_data_file:s0 is not valid (left unmapped). [ 5.738094] SELinux: Context u:object_r:vendor_location_data_file:s0 is not valid (left unmapped). [ 5.739035] SELinux: Context u:object_r:vendor_time_data_file:s0 is not valid (left unmapped). [ 5.739849] SELinux: Context u:object_r:vendor_mpctl_data_file:s0 is not valid (left unmapped). [ 5.739949] SELinux: Context u:object_r:vendor_secure_element_vendor_data_file:s0 is not valid (left unmapped). [ 5.740077] SELinux: Context u:object_r:vendor_iop_data_file:s0 is not valid (left unmapped). [ 5.741055] SELinux: Context u:object_r:vendor_vpp_data_file:s0 is not valid (left unmapped). [ 5.741159] SELinux: Context u:object_r:vendor_tui_data_file:s0 is not valid (left unmapped). [ 5.741324] SELinux: Context u:object_r:vendor_hbtp_log_file:s0 is not valid (left unmapped). [ 5.741416] SELinux: Context u:object_r:vendor_hal_neuralnetworks_data_file:s0 is not valid (left unmapped). [ 5.741505] SELinux: Context u:object_r:thermal_data_file:s0 is not valid (left unmapped). [ 5.741904] SELinux: Context u:object_r:vendor_nfc_vendor_data_file:s0 is not valid (left unmapped). [ 5.742224] SELinux: Context u:object_r:fingerprint_data_file:s0 is not valid (left unmapped). [ 5.742635] SELinux: Context u:object_r:vendor_qti_data_file:s0 is not valid (left unmapped). [ 5.742739] SELinux: Context u:object_r:vendor_ipa_vendor_data_file:s0 is not valid (left unmapped). [ 5.743085] SELinux: Context u:object_r:vendor_netmgr_data_file:s0 is not valid (left unmapped). [ 5.743377] SELinux: Context u:object_r:vendor_netmgr_recovery_data_file:s0 is not valid (left unmapped). [ 5.743654] SELinux: Context u:object_r:vendor_port_bridge_data_file:s0 is not valid (left unmapped). [ 5.743757] SELinux: Context u:object_r:vendor_shsusr_data_file:s0 is not valid (left unmapped). [ 5.744140] SELinux: Context u:object_r:vendor_pddump_data_file:s0 is not valid (left unmapped). [ 5.744252] SELinux: Context u:object_r:vendor_mediadrm_vendor_data_file:s0 is not valid (left unmapped). [ 6.009006] SELinux: Context u:object_r:apex_system_server_data_file:s0 is not valid (left unmapped). [ 6.009843] SELinux: Context u:object_r:apex_tethering_data_file:s0 is not valid (left unmapped). [ 6.011097] SELinux: Context u:object_r:apex_virt_data_file:s0 is not valid (left unmapped). [ 6.011848] SELinux: Context u:object_r:uprobestats_configs_data_file:s0 is not valid (left unmapped). [ 6.013050] SELinux: Context u:object_r:odsign_metrics_file:s0 is not valid (left unmapped). [ 6.013286] SELinux: Context u:object_r:virtualizationservice_data_file:s0 is not valid (left unmapped). [ 6.013948] SELinux: Context u:object_r:stats_config_data_file:s0 is not valid (left unmapped). [ 6.014129] SELinux: Context u:object_r:bootanim_data_file:s0 is not valid (left unmapped). [ 6.017443] SELinux: Context u:object_r:perfetto_traces_profiling_data_file:s0 is not valid (left unmapped). [ 6.018065] SELinux: Context u:object_r:magisk_file:s0 is not valid (left unmapped). [ 6.253716] SELinux: Context u:object_r:shutdown_checkpoints_system_data_file:s0 is not valid (left unmapped). [ 6.399123] SELinux: Context u:object_r:sdk_sandbox_system_data_file:s0:c512,c768 is not valid (left unmapped). [ 7.321477] read descriptors [ 7.321484] read strings [ 7.325817] android_work: did not send uevent (0 0 0000000000000000) [ 12.976442] SELinux: Context u:object_r:adbroot_data_file:s0 is not valid (left unmapped). [ 12.976651] SELinux: Context u:object_r:vendor_dpmd_data_file:s0 is not valid (left unmapped). [ 13.317311] F2FS-fs (mmcblk0p87): Unrecognized mount option "inlinecrypt" or missing value [ 13.402269] F2FS-fs (mmcblk0p87): Mounted with checkpoint version = 2eea9207 [ 16.146985] binder: 469:566 ioctl 40046210 77e5e02584 returned -22 [ 16.196682] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 16.232613] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 16.262006] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 16.289762] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 16.313733] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 16.333733] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 17.013187] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: (null) [ 17.256884] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: (null) [ 17.483134] EXT4-fs (mmcblk0p85): mounted filesystem without journal. Opts: (null) [ 21.297087] FAT-fs (mmcblk0p80): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 23.528549] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 23.562362] EXT4-fs (mmcblk0p84): mounted filesystem with ordered data mode. Opts: [ 23.885379] EXT4-fs (mmcblk0p69): mounted filesystem with ordered data mode. Opts: [ 23.912731] EXT4-fs (mmcblk0p85): mounted filesystem without journal. Opts: [ 23.952449] EXT4-fs (mmcblk0p60): mounted filesystem with ordered data mode. Opts: discard [ 32.054645] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 32.276865] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 32.405946] [brightness]sgm_brightness_set brightness = 204 [ 32.440738] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 32.493781] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 32.524349] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 32.556349] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 32.581886] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 32.609633] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 32.646961] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 32.721843] EXT4-fs (mmcblk0p86): warning: mounting unchecked fs, running e2fsck is recommended [ 32.722481] EXT4-fs (mmcblk0p86): mounted filesystem without journal. Opts: barrier=1,discard [ 32.723033] read descriptors [ 32.723041] read strings [ 32.728052] android_work: did not send uevent (0 0 0000000000000000) [ 32.740423] EXT4-fs (mmcblk0p85): mounted filesystem without journal. Opts: [ 32.884753] read descriptors [ 32.884763] read strings [ 32.888441] android_work: did not send uevent (0 0 0000000000000000) [ 35.673828] read descriptors [ 35.673837] read strings [ 35.676692] android_work: did not send uevent (0 0 0000000000000000) [ 36.382394] mtp_open [ 36.382623] mtp_open [ 36.382626] mtp_open mtp_release not called returning EBUSY [ 36.382640] mtp_release [ 37.182749] mtp_open
aviraxp
commented
2 days ago LegacyFreeman
commented
2 days ago Does https://github.com/topjohnwu/Magisk/actions/runs/10692298945/artifacts/1888650981 bootloop?
Yes, I'm getting a bootloop again. The latest working version is 8e82113b(27007)
aviraxp
commented
1 day ago Please install debug variant of that zip and repost dmesg. That gives magisk init debug information.
LegacyFreeman
commented
19 hours ago dmesg.log Лог версии Magisk (4f18a66d) (27008) (D)
Magisk (4f18a66d) (27008) (D) Xiaomi RN8t (willow) crDroid 10.8 (Android 14)
The installation is successful, after rebooting the recovery just opens. Version 27007 works fine.