Socket not returning to regular program after heating at a low temp

[heronemis]

First off, thank you so much for creating this plugin!

How to reproduce:

1. Make sure the socket is to "Auto" through the Home app
2. Set the socket to manually 'heat' at a low temp (colder than the room)
3. Set the socket back to Auto. The socket will turn on for a second and then off. It will not return to the regular program until the socket is turned off or set to heat at a high temp, then set to Auto.

Background I have a scene for (essentially) turning off my ovens/sockets. This scene sets the sockets to heat at 16 degrees celsius. This is used when I go to bed or leave the house. During the night, an automation sets the sockets back to 'Auto' so they follow the schedule set with the Mill app. During the last few weeks, the sockets have failed to turn back on and instead stayed off, resulting in a cold morning...

My setup:

• 3 Mill WiFi Socket. One is right next to the router. Firmware Revision 1.1.2.
• iPhone 11 Pro, iOS 14.3 and 14.4

Thanks!

[andyno]

Hi! I'll have a look, but i don't own a socket so might be a bit hard for me to debug

[bjornand1]

Hi @andyno, is there any way we could help test ways to make the WiFi Socket work with the plugin? My testing of the plugin (as well as a Mill Homey app) has revealed that the measured temperature is collected correctly into HomeKit. As for programs, it seems a bit random if the set program is correctly presented in HomeKit and changing it in HomeKit has no effect on the device. I would certainly help to contribute to making the plugin work for the socket!