Open GoogleCodeExporter opened 8 years ago
thank you line 17 and 28. worked great. :)
Original comment by MusicaNL...@gmail.com
on 8 Sep 2012 at 6:53
Also waiting for a solution to 49. Made the changes to in line 17 but still
consistently errors out
Original comment by mbar...@gmail.com
on 11 Sep 2012 at 2:11
I have the some problem as #52 & #40, Fail: List index out of range.
I made the change to line 203.
Very frustrating to say the least.
Why no fix for this?
Original comment by philli...@bellsouth.net
on 16 Sep 2012 at 5:59
@ #53 - hello there. did you try ejecting the install dmg from your desktop as
mentioned in #42? eject it and delete it from your trash as well. then try to
run namebench. if worse comes to worse i would delete namebench all together
(and delete from trash too), redownload namebench and reinstall, eject the
install dmg from your desktop and trash, then go to comment #28 and go through
those steps. Hope i didn't confuse you and hope you get namebench to work for
you.
Original comment by MusicaNL...@gmail.com
on 17 Sep 2012 at 1:27
Also getting stuck on Wildcard check with OS 10.8.1
Source through terminal worked however
Original comment by davecunn...@gmail.com
on 19 Sep 2012 at 12:50
Followed all the instructions at #46 but it failed in the final "health check".
However I ran it a second time immediately and it worked. It would be
preferable if the code were updated for Mountain Lion.
Original comment by bernard....@gmail.com
on 19 Sep 2012 at 9:35
Than you #17 your suggestion has worked for me!
OSX 10.8.1
namebench 1.3.1
Original comment by snow.hel...@gmail.com
on 20 Sep 2012 at 5:24
#17 has worked for me.
OSX 10.8.2
namebench 1.3.1
Original comment by higashij...@gmail.com
on 23 Sep 2012 at 6:23
I had same problem with the fail like in comment 49. i was trying it with
safari. So decided to to change to Alexa 2000 and it worked. Hope this helps!
Original comment by bigboot...@gmail.com
on 27 Sep 2012 at 8:20
Running OS X 10.8.2, MacBook Pro Retina Display, namebench 1.3.1
The fixes at Lines 17 and 28 worked perfectly for me.
Thanks to both of the previous commenters.
Original comment by jbbo...@gmail.com
on 27 Sep 2012 at 10:15
Thanks! #17 worked for me.
OSX 10.8.2
namebench 1.3.1
Original comment by abrec...@sitenix.com
on 2 Oct 2012 at 5:23
yup... now its working. thanks #17
Original comment by jagta...@gmail.com
on 6 Oct 2012 at 1:58
[deleted comment]
Changing that line and saving it and running the application gives the error
"Namecheck is damaged" ?
Original comment by Ravi.Raj...@gmail.com
on 13 Oct 2012 at 2:18
It was the security settings in "Preferences" ..
Got it working now.
Original comment by Ravi.Raj...@gmail.com
on 13 Oct 2012 at 2:23
Line 16 = LIKE A BOSS
thank you!
Original comment by fanki...@googlemail.com
on 16 Oct 2012 at 10:20
Got the same problem here with OSX 10.8.2 (Mountain Lion).
I confirm that changing the line 203 as specified in comment #17 make it work.
Original comment by aky...@gmail.com
on 18 Oct 2012 at 11:58
Comment 17 works like a charm! Thanks so much!
Original comment by yier...@gmail.com
on 22 Oct 2012 at 7:02
#17's magic voodoo code worked for me also
Original comment by sayne...@gmail.com
on 28 Oct 2012 at 9:52
Thanks #17. Fixed on Mountain Lion
Original comment by falconer...@gmail.com
on 6 Nov 2012 at 2:18
[deleted comment]
17 & 28 - thanks so much worked for me too!
Original comment by mjod1...@gmail.com
on 7 Nov 2012 at 9:26
[deleted comment]
#17's line worked for me. Mountain Lion 10.8.1
Original comment by kyle.mor...@gmail.com
on 22 Nov 2012 at 10:32
#17 worked great, thanks!
Original comment by nmc.tjen...@gmail.com
on 2 Dec 2012 at 6:15
[deleted comment]
After amending file line #203 had same error as #40 and #23.
Followed suggestions of #47 and #59 --- run using Alexa 200 instead of Safari
and it should complete without error.
Thank you for this.
Original comment by butidi...@gmail.com
on 4 Dec 2012 at 7:56
Thank you, #17. It worked for Mountain Lion 10.8.2.
Original comment by ffmii...@gmail.com
on 17 Dec 2012 at 10:53
I have changed that line to 2**16 but it was a duplicate file. It wouldnt let
me change the original. And i managed to save that file to my desktop. Now what?
Original comment by jbeirn...@gmail.com
on 18 Dec 2012 at 12:04
Thanks. #17 worked for me, too.
Original comment by yoshihis...@gmail.com
on 20 Dec 2012 at 3:59
Had to drag the app from the applications folder to the desktop in order to be
able to show the package contents and perform #17. Dragged it back, now it runs
smoothly. Thanks!
Original comment by jteuli...@gmail.com
on 31 Dec 2012 at 6:00
[deleted comment]
Thanks. #17 worked also for me.
Original comment by bram.c...@aldurio.net
on 5 Jan 2013 at 1:06
[deleted comment]
I also am experiencing the "hang" at Waiting for wildcard cache queries." Would
it have anything to do with my modem being set up in bridge mode?
Original comment by mckempe...@gmail.com
on 6 Jan 2013 at 6:51
@mckempe: Probably not. Reading the comments above, it seems like this is an
issue with the mac application. If you want to be sure, try the command line
version (see the wiki).
Original comment by ratberry...@gmail.com
on 6 Jan 2013 at 7:59
Hi,
Mine gets to "Sending 250 queries to 11 servers" and hangs at [53/2750], anyone
have any idea how I can fix this? It got past the "Waiting for wildcard cache
queries" after I changed line 203. This is massively frustrating as my internet
is failing to load the page like 50% of the time now so I'm desperate to get it
fixed! Thanks
Original comment by rthompso...@gmail.com
on 7 Jan 2013 at 12:43
#17 fixed the wildcard cache problem.
Now it hangs at "Sending 250 queries to 11 servers". (See possible solution
below.)
The command line instructions in #14 and #15 worked. You need to download the
source code:
http://code.google.com/p/namebench/downloads/detail?name=namebench-1.3.1-source.
tgz&can=2&q=
NOTE: My *original* DNS was OPENDNS that I had manually entered some time ago.
After running the command line namebench, it recommended going back to COMCAST,
my ISP. Using the recommended DNS, I ran the GUI namebench on 10.8.2 again and
it completed.
Original comment by strand....@gmail.com
on 18 Jan 2013 at 10:16
i tried #17's solution, but ran into the same problem as #23. i am not
running namebench on a .dmg, and the solution proposed by #46 didn't help.
However, the solution from #59 did help. MB Air running 8.1.2, and namebench
1.3.1
Original comment by tod.sto...@visitube.com
on 24 Jan 2013 at 10:07
I don't know enough about computers to change command lines in a program. How
about it gets fixed. It's not like 10.8.2 has only just come on stream.
Original comment by Bikewom...@gmail.com
on 2 Feb 2013 at 11:56
I'll jump through the hoops. But this ought to be fixed; We're in month 8.
Original comment by JohnA...@gmail.com
on 6 Feb 2013 at 5:22
When I edit I keep getting application damaged move to trash.. any ideas what I
am doing wrong?
Original comment by MattRoch...@gmail.com
on 10 Feb 2013 at 12:36
@Matt: Try first launching the app once, then quit it, and then edit the line.
Original comment by zaaj...@gmail.com
on 10 Feb 2013 at 12:43
Thanks #17 ! You rock !
Original comment by laurent....@gmail.com
on 17 Feb 2013 at 5:43
For those still having problems after implementing the fix in #17, try this:
In System Preferences, Security & Privacy
1. Click the lock and authenticate
2. Write down your setting for "Allow applications downloaded from"
3. Change "Allow applications downloaded from:", to "Anywhere"
4. Click "Allow From Anywhere" in the confirmation box.
5. Close System Preference and run Namebench - it should complete successfully
now.
Important: After running and getting your report, go back into System
Preferences and change the "Allow Applications Downloaded From" back to where
it was.
Original comment by gap...@gmail.com
on 22 Feb 2013 at 4:43
Thanks #17 !!
Original comment by sachdev....@gmail.com
on 23 Feb 2013 at 3:03
name bench gave me a slow dns sever and when i try yo change it, it will
automaticly change it to the slow dns server. i cant seem to change it
i need help!
Original comment by drajx...@gmail.com
on 24 Feb 2013 at 10:47
Attachments:
#17 did it for me too!
Original comment by a...@clickmantra.in
on 1 Mar 2013 at 11:40
I'm trying to make this change now, but its been like 8 months since reported,
how come its not updated yet??
Original comment by amityweb...@gmail.com
on 5 Mar 2013 at 9:07
For those having trouble using Terminal I found on Youtube this very good and
straightforward video that will get Namebench up and working on Mountain Lion.
http://www.youtube.com/watch?v=myASfZzbFp0&feature=youtube_gdata
Works great...
Original comment by mrgund...@gmail.com
on 5 Mar 2013 at 10:33
Original issue reported on code.google.com by
hyn...@gmail.com
on 1 Jul 2012 at 11:00