Saroo brick after last update 20231101

[adrianojbc]

Saroo brick after last update SAROO_20231101.zip @tpunix tpunix, I updated to the latest version of saroo, and it took a long time to load while updating. I restarted Saturn and then Saroo wouldn't boot anymore.

I was using the 10/31/2023 version, I formatted the SD card in fat32: I went to use the 01/11 update with SSMaster.bin and .rbf.

After that it loaded as if it was updating but it stayed for a long time, about 2 to 3 minutes. I restarted the Saturn, and Saroo no longer booted. It only opens in the Saturn menu (Drive empty)

Info: Board HW Ver. 1,32f

Can you help me, Is it possible to roll back the firmware? Thanks

[cyo-the-vile]

Explain the steps you performed in the update process. As in, what order you performed them etc

On Thu, Nov 2, 2023, 9:33 AM adrianojbc @.***> wrote:

Saroo brick after last update SAROO_20231101.zip @tpunix https://github.com/tpunix tpunix, I updated to the latest version of saroo, and it took a long time to load while updating. I restarted Saturn and then Saroo wouldn't boot anymore. Can you help me? Thanks

— Reply to this email directly, view it on GitHub https://github.com/tpunix/SAROO/issues/21, or unsubscribe https://github.com/notifications/unsubscribe-auth/APPFYF7SPIAC2DPNIDIMRYTYCOVL3AVCNFSM6AAAAAA627W4TSVHI2DSMVQWIX3LMV43ASLTON2WKOZRHE3TIMZZGI2DOOA . You are receiving this because you are subscribed to this thread.Message ID: @.***>

[adrianojbc]

I was using the 10/31/2023 version, I formatted the SD card in fat32: I went to use the 01/11 update with SSMaster.bin and .rbf.

After that it loaded as if it was updating but it stayed for a long time, about 2 to 3 minutes. I restarted the Saturn, and Saroo no longer booted.

Info: Board HW Ver. 1,32f

[maxxsun]

two green LEDs on?

[adrianojbc]

no, the Leds of the Saroo are off... to test, I have a 4M action replay and it works on my Saturn.

[maxxsun]

no, the Leds of the Saroo are off... to test, I have a 4M action replay and it works on my Saturn.

Please contact seller，may be he can help you.

[adrianojbc]

Thanks, I will try to contact the seller. If I have any information I will share it here

[paulocarioca]

Adriano, me manda uma msg no whatsapp que o seu problema deve ter sido o mesmo que o meu e eu consegui resolver. Meu whatsapp é: 21 96527-3531

[adrianojbc]

I have all the previous versions, I tested all, I switched to another SD card, but no results,

https://github.com/tpunix/SAROO/assets/9090648/8f889bcc-2f09-4e33-8960-420e2361da71

[luisredo]

https://github.com/tpunix/SAROO/assets/21347315/42bbe270-74bc-40da-952e-2f7466944149

I have all the previous versions, I tested all, I switched to another SD card, but no results,

WhatsApp.Video.2023-11-02.at.16.13.18.mp4

The same thing happens to me, since I bought it it hasn't worked and I have tried it on 3 consoles, the seller tells me that it is from the SD, but I have already tried more than 10 different SDs

[maxxsun]

lv_0_20231104214649.mp4

I have all the previous versions, I tested all, I switched to another SD card, but no results, WhatsApp.Video.2023-11-02.at.16.13.18.mp4

The same thing happens to me, since I bought it it hasn't worked and I have tried it on 3 consoles, the seller tells me that it is from the SD, but I have already tried more than 10 different SDs

sd card format must be fat32

[luisredo]

It is formatted in FAT32 32k cluster.

[maxxsun]

It is formatted in FAT32 32k cluster.

seller said that he has contacted you

[tzmwx]

The same thing happens to me, since I bought it it hasn't worked and I have tried it on 3 consoles, the seller tells me that it is from the SD, but I have already tried more than 10 different SDs

FAT 32 copy THIS 0419 ramimage.bin to SD https://github.com/tpunix/SAROO/releases/download/v0.1/firm_v0.1.rar

[adrianojbc]

The replacement saroo arrived and I updated normally to the 11/11 version. The old one with problems I will send to the seller.

[adrianojbc]

Hello @tpunix , I would like to know what the saroo diagram is so I can connect the cables correctly and upload the firmware using STLINKV2:

Can you confirm if this is the case?

[tpunix]

GND SWCLK SWDIO TXD RXD