DMR ID decode without user.db installed (VHF version)

travisgoodspeed / MD380Tool

An Android client for the patched 'md380tools' firmware.

30 stars 6 forks source link

DMR ID decode without user.db installed (VHF version) #10

Open iw2ngg opened 7 years ago

iw2ngg commented 7 years ago

If the name (corresponding to the id), IN THE INTERNAL CONTACT LIST OF THE DEVICE, is long 16 bytes, when firmware reads it, it not founds the terminating 0 (nul) byte (I think) and then, when the name is showed, it appears with some garbage at the end. If the name is shorter than the maximum length there isn't any problem.

travisgoodspeed commented 7 years ago

@iw2ngg Does this appear in the stock firmware from Tytera, or only in our patched firmware?

iw2ngg commented 7 years ago

I didn't tested with stock firmware (from retevis, it is rt3 but it is exactly the same). At the moment I must answer: I don't know. It is a new radio; it has been patched immediately. Sorry