So the # key has the function in normal operation that the manual dial mode is called. If I program the function key P1 (1750Hz), then the # key is also double assigned, when I press the # key it opens the manual dial mode but also the 1750Hz sound is sent at the same time. The same is true for the P1 button.
Now let's go to the P2 button, for this I have programed Hi / Lo occupied, from this page there are no problems, but I press the red (back button) I'm not in the MD-380 special menu, but it is Hi / Lo switched, so apparently the P2 button has the same function. I'm in Manual Dial and then press the green, arrow up, down arrow and the red button nothing happens. On another MD380 by pressing the green button A, B, C, D, even a back in the lower right window is missing in the MD-380, which makes no problems. This is only the case with the failured MD-380. I have flashed several times the FW and also different versions of the MD380 tool.
Does anyone have another idea, the error has occurred at once, a week before I had programmed it and there everything was OK. Has occurred the error on Sat. before that, nothing was flashed and nothing programmed.
So the # key has the function in normal operation that the manual dial mode is called. If I program the function key P1 (1750Hz), then the # key is also double assigned, when I press the # key it opens the manual dial mode but also the 1750Hz sound is sent at the same time. The same is true for the P1 button. Now let's go to the P2 button, for this I have programed Hi / Lo occupied, from this page there are no problems, but I press the red (back button) I'm not in the MD-380 special menu, but it is Hi / Lo switched, so apparently the P2 button has the same function. I'm in Manual Dial and then press the green, arrow up, down arrow and the red button nothing happens. On another MD380 by pressing the green button A, B, C, D, even a back in the lower right window is missing in the MD-380, which makes no problems. This is only the case with the failured MD-380. I have flashed several times the FW and also different versions of the MD380 tool. Does anyone have another idea, the error has occurred at once, a week before I had programmed it and there everything was OK. Has occurred the error on Sat. before that, nothing was flashed and nothing programmed.
Best wishes Kati